| PART NUMBER | DESCRIPTION | PRICING |
| | | |
| | | |
| 9 | Hose, air 1/4" x 6 in coupled | $32.00 |
| 15 | Disconnect, male x 1/4" male thrd | $7.00 |
| 22 | Adaptor, 3/8" hose to CPF filter | $5.00 |
| 24 | Gauge, pressure 0-160 btm mnt | $34.00 |
| 25 | Disconnect, fem x 1/4" fem thrd | $16.00 |
| 55 | SHA suction head, less nozzle-jet | $49.00 |
| 89 | Nut, ceramic nozzle | $25.00 |
| 90 | O-ring, ceramic nozzle | $2.50 |
| 91 | Nozzle, INEX ceramic, 1/4" orifice | $20.00 |
| 92 | Nozzle, INEX ceramic, 3/8" orifice | $20.00 |
| 95 | Hose, 5/8" ID material w/fittings | $131.00 |
| 96 | Hose, air 1/2" x 10 ft w/ftgs | $61.00 |
| 98 | Foot valve, 3/8, INEX | $261.00 |
| 128 | Clamp, gauntlet, ACDFM cab | $7.00 |
| 134 | Bearing, bag shaker, ACDFM cab | $84.00 |
| 136 | Gasket, cab door, ACD | $114.00 |
| 148 | Filter, air, ACD inlet 10" x10" | $21.00 |
| 183 | Grommet, air hose inlet, ACD/MCY cab | $3.00 |
| 184 | Grommet, matl hose inlet, ACD/MCY cab | $3.00 |
| 186 | Gasket, MCY door, per foot | $2.00 |
| 187 | Gasket, 5/16" x 1", per foot | $2.00 |
| 189 | Gasket, 5/16" x 3/4", per foot | $2.00 |
| 190 | Gasket, 7/16" x 1" per foot | $2.00 |
| 192 | Gasket, 5/32" x 3/4", per foot | $4.00 |
| 193 | Impeller, AFM, 200 cfm for 2232 | $149.00 |
| 195 | Window, AFM/MCY, 6-1/4" x 13-1/2" | $40.00 |
| 226 | Window, AFM, 6-1/4" x 20-3/4" | $40.00 |
| 312 | Glove set, ACD/MCY w/ gauntlet | $99.00 |
| 313 | Glove set, ACD/MCY | $59.00 |
| 314 | Gauntlet set, ACD/MCY cab | $55.00 |
| 360 | Window, ACD/MCY, 13" x 19" | $48.00 |
| 390 | Valve, foot, 1/2-in, 2-way | $328.00 |
| 393 | Valve, foot, 1/2" w/guard Suct Cab | $479.00 |
| 496 | Window, ACD oval, 12" x 20" | $92.00 |
| 511 | Screen, oval, ACD, 12" x 20" | $30.00 |
| 531 | Gasket, window, oval, ACD, 54" | $25.00 |
| 541 | Window, AFM/MCY oval, 7"x 17-1/2" | $97.00 |
| 543 | Screen, oval, AFM/MCY, 7" x 17-1/2" | $20.00 |
| 551 | Cplg, CF (brass) for 1-1/4" npl | $29.00 |
| 552 | Holder, CFA (alum) for 1-1/4" thrd nozzle | $30.00 |
| 553 | Cplg, CF-2 (brass), for 1-1/2" thrd npl | $33.00 |
| 555 | Cplg, CF-3 (brass), for 2" thrd npl | $86.00 |
| 556 | Cplg, CFA-3 (alum), for 2" thrd npl | $61.00 |
| 558 | Cplg, CFA-1/2 (alum), for 1/2" thrd npl | $37.00 |
| 559 | Cplg, CFA-3/4 (alum), for 3/4" thrd npl | $39.00 |
| 561 | Cplg, CFA-12 (alum), for 1-1/2" thrd npl | $67.00 |
| 562 | Cplg, PAC-10, for 2" thrd pipe npl | $67.00 |
| 563 | Cplg, CQ-1 (brass), 1-1/2" OD | $33.00 |
| 564 | Cplg, CQ-2 (brass), 1-7/8" OD | $34.00 |
| 565 | Cplg, CQ-3 (brass), 2-5/32" OD | $40.00 |
| 566 | Cplg, CQ-4 (brass), 2-3/8" OD | $76.00 |
| 567 | Cplg, CQ-12 (brass), 2-3/8" OD | $76.00 |
| 568 | Cplg, CQA-1 (alum), 1-1/2" OD | $13.00 |
| 569 | Cplg, CQA-2 (alum), 1-7/8"OD | $13.00 |
| 570 | Cplg, CQA-3 (alum), 2-5/32" OD | $18.00 |
| 573 | Cplg, CQA-4 (alum), 2-3/8" OD | $19.00 |
| 574 | Cplg, CQA-12 (alum), 2-3/8" OD | $65.00 |
| 575 | Holder, CFFHA (alum) for flgd nozzle | $29.00 |
| 576 | Holder, CFFHB (brass) for flgd nozzle | $46.00 |
| 577 | Holder, CHE-1/2 (alum), 1-3/16" OD | $12.00 |
| 578 | Holder, CHE-1 (alum), 1-1/2" OD | $12.00 |
| 579 | Holder, CHE-2 (alum), 1-7/8" OD | $13.00 |
| 580 | Holder, CHE-3 (alum), 2-5/32" OD | $14.00 |
| 581 | Holder, CHE-4 (alum), 2-3/8" OD | $61.00 |
| 592 | Holder, SCF (brass) for 1-1/4" thrd noz | $42.00 |
| 595 | Cplg, air hose, Power Gun | $15.00 |
| 599 | Cplg, CQA-1/2 (alum), 13/16"OD | $15.00 |
| 715 | Hose, 3" ID, MCY, per foot | $18.00 |
| 716 | Hose, 4" ID, MCY/VCY, per foot | $26.00 |
| 740 | Dust bag, 18" x 20" (each) | $54.00 |
| 749 | Tool, dust bag (00740), insert | $52.00 |
| 750 | Clamp, 6-1/2" OD | $7.00 |
| 751 | Educt-O-Matic, complete | $971.00 |
| 752 | Educt-O-Matic, less attachments | $866.00 |
| 753 | Educt-O-Matic attachment set | $226.00 |
| 754 | EDM nozzle, 3/8" tungsten carbide | $86.00 |
| 755 | EDM edge attachment | $20.00 |
| 756 | EDM serrated attachment | $49.00 |
| 757 | EDM master adaptor | $52.00 |
| 758 | EDM angle attachment | $72.00 |
| 759 | EDM flat lip attachment | $20.00 |
| 761 | EDM blast head | $175.00 |
| 762 | EDM standard adaptor | $58.00 |
| 763 | EDM nozzle, 3/8" steel | $25.00 |
| 765 | EDM blast jet | $17.00 |
| 766 | EDM jet gskt, .675" OD x .475" ID | $2.00 |
| 767 | EDM blast head npl | $14.00 |
| 768 | EDM swivel connector | $25.00 |
| 769 | EDM o-ring | $4.00 |
| 770 | EDM main body | $328.00 |
| 771 | EDM abrasive hose | $16.00 |
| 774 | EDM ferrule | $3.00 |
| 775 | EDM air hose asmbly | $54.00 |
| 776 | EDM suction jet | $16.00 |
| 778 | EDM baffle asmbly | $46.00 |
| 781 | EDM abrasive container latch | $5.00 |
| 782 | EDM container latch hook | $12.00 |
| 784 | EDM exh tube | $84.00 |
| 785 | EDM dust bag | $43.00 |
| 786 | EDM o-ring | $2.00 |
| 786 | O-ring, EDM & Sentinel | $2.00 |
| 789 | EDM valve body | $85.00 |
| 792 | EDM valve bushing | $22.00 |
| 793 | EDM valve bushing gasket | $3.00 |
| 794 | EDM o-ring | $2.00 |
| 794 | O-ring, EDM & MSV | $2.00 |
| 795 | EDM washer, 17/64" ID x 1/2" OD | $2.00 |
| 796 | EDM retaining ring | $2.00 |
| 797 | EDM spring, 9/32" ID x 1-1/2" | $2.00 |
| 798 | EDM valve stem | $20.00 |
| 799 | EDM washer | $4.00 |
| 800 | EDM washer, brass .80" OD x 1/8" | $7.00 |
| 802 | EDM washer, brass 9/16"ODx 3/64 | $0.90 |
| 803 | EDM spring, 5/32" ID x 1-1/4" | $4.00 |
| 804 | EDM washer | $2.00 |
| 805 | EDM eyelet, brass | $0.80 |
| 806 | EDM washer, brass 1/2" ODx 1/32 | $2.00 |
| 807 | EDM retaining ring | $0.80 |
| 808 | EDM aluminum pipe npl | $26.00 |
| 810 | EDM npl and grip asmbly | $33.00 |
| 811 | EDM valve handle/yoke asmbly | $39.00 |
| 812 | EDM handle grip, molded | $8.00 |
| 814 | EDM abrasive container | $116.00 |
| 815 | EDM swivel nut & insert asmbly | $34.00 |
| 817 | EDM clip | $4.00 |
| 846 | EDM exh tube gasket | $5.00 |
| 850 | Gasket, CQG coupling, 10 pk | $19.00 |
| 851 | Gasket, CQG coupling | $4.00 |
| 852 | Gasket, CQ12G coupling | $7.00 |
| 853 | Washer, NW-1 | $2.00 |
| 854 | Washer, NW-2 | $2.00 |
| 855 | Washer, NW-3 | $2.00 |
| 856 | Washer, NW-4 | $2.00 |
| 869 | Washers, NW-4 (10 pk) | $15.00 |
| 882 | B/Mach Classic sta, 3 cf 1" pipe | CALL |
| 884 | B/Mach Classic port, 3 cf 1" pipe | CALL |
| 885 | B/Mach Classic sta, 6 cf 1" pipe | CALL |
| 887 | B/Mach Classic port, 6 cf 1" pipe | CALL |
| 894 | B/Mach Classic sta, 7 cf 1-1/4" w/FSV | CALL |
| 902 | B/Mach Classic sta, 10 cf 1-1/4" pipe | CALL |
| 903 | B/Mach Classic sta, 7 cf 1-1/4" w/hpr | CALL |
| 904 | B/Mach Classic sta, 20 cf 1-1/4" pipe | CALL |
| 908 | B/Mach Classic port, 0.5 cf package 1 | CALL |
| 912 | B/Mach Classic port, 3 cf package 4 | CALL |
| 914 | B/Mach Classic port, 6 cf pkg 1" pipe | CALL |
| 916 | B/Mach Classic port, 6 cf package 6 | CALL |
| 924 | B/Mach indl, 6 cf pneu package | CALL |
| 977 | Piping kit, 1-1/4" for 2452 | $662.00 |
| 1019 | Adaptor, brass 3/8" ht x 1/4" pt | $6.00 |
| 1020 | Union, 3/8" helmet air hose | $6.00 |
| 1039 | B/Mach Classic port, 1 cf package 2 | CALL |
| 1060 | Disconnect, fem x 3/8" hose | $15.00 |
| 1076 | Hollo-Blast (tc tip) with 1/2" noz | $714.00 |
| 1077 | Hollo-Blast (tc tip) w/o nozzle | $651.00 |
| 1078 | HB deflection tip, carbide | $61.00 |
| 1079 | HB tool holder | $107.00 |
| 1080 | HB stem support asmbly | $195.00 |
| 1084 | HB throat sleeve, carbide | $64.00 |
| 1085 | HB stem extn sleeve, carbide | $64.00 |
| 1086 | HB throat rod and tip | $47.00 |
| 1089 | HB tip holding nut | $15.00 |
| 1090 | HB tip protection sleeve | $58.00 |
| 1091 | HB tip protect sleeve, threaded | $47.00 |
| 1092 | HB knurled lock nut | $15.00 |
| 1093 | Gasket, front, HB stem support | $3.00 |
| 1094 | Gasket, rear, HB stem support | $3.00 |
| 1095 | Coupling, 1-7/8" OD x 1-7/16" | $20.00 |
| 1096 | Washer, brass, HB | $2.00 |
| 1097 | O-ring, 1-1/8" ID x 1/8" | $2.00 |
| 1098 | Hollo-Blast Jr. with reducer | $593.00 |
| 1099 | Hollo-Blast Jr. without reducer | $499.00 |
| 1100 | HBJ deflection tip, carbide | $44.00 |
| 1101 | HBJ body | $26.00 |
| 1102 | HBJ stem support asmbly | $164.00 |
| 1105 | HBJ stem sleeve, carbide | $44.00 |
| 1108 | HBJ throat rod nut, cad plate | $17.00 |
| 1109 | Ring, retaining, HBJ | $7.00 |
| 1110 | Gasket, HBJ nozzle | $2.50 |
| 1111 | HBJ knurled lock nut | $17.00 |
| 1112 | HBJ coupling, 3/8" diameter | $21.00 |
| 1113 | HBJ nozzle, 9/32" tung carbide | $83.00 |
| 1114 | HBJ centering collar set | $82.00 |
| 1115 | HBJ reducer | $202.00 |
| 1117 | HBJ collar set, 1" | $26.00 |
| 1118 | HBJ collar set, 1-1/4" | $26.00 |
| 1119 | HBJ collar set, 1-7/16" | $26.00 |
| 1120 | HBJ collar set, 1-7/8" | $26.00 |
| 1121 | HBJ npl, 3/8" x 6" | $44.00 |
| 1124 | HBC centering carriage | $185.00 |
| 1125 | HBC front collar, cad plate | $70.00 |
| 1126 | HBC rear collar, cad plate | $70.00 |
| 1131 | HBC adjustable centering carriage | $521.00 |
| 1133 | Bushing w/washer, HBC wheel | $18.00 |
| 1153 | HBC wheel, steel 1-1/8" diameter | $10.00 |
| 1154 | HBC button set, 5/16" long | $21.00 |
| 1155 | HBC button set, 9/16" long | $21.00 |
| 1156 | HBC button set, 13/16" long | $21.00 |
| 1157 | HBC button set, 1-1/16" long | $21.00 |
| 1158 | HBC centering button set | $73.00 |
| 1162 | HBJ throat rod and tip asmbly | $46.00 |
| 1178 | B/Mach Classic port, 3 cf w/TLR100 FSV | CALL |
| 1179 | B/Mach Classic port, 3 cf w/TLR300 FSV | CALL |
| 1180 | B/Mach Classic sta, 3 cf 1-1/4" pipe | CALL |
| 1181 | B/Mach Classic port, 3 cf 1-1/4" pipe | CALL |
| 1186 | B/Mach Classic port, 6 cf w/TLR100 FSV | CALL |
| 1187 | B/Mach Classic port, 6 cf w/TLR300 FSV | CALL |
| 1189 | B/Mach Classic port, 6 cf 1-1/4" pipe | CALL |
| 1190 | B/Mach Classic sta, 6 cf 1-1/4" pipe | CALL |
| 1191 | B/Mach Classic sta, 8 cf dual-ch, 1-out,ACS | CALL |
| 1192 | B/Mach Classic port, 8 cf dual-ch, 1-out,ACS | CALL |
| 1193 | B/Mach Classic sta, 8 cf dual-ch, 2-out,ACS | CALL |
| 1194 | B/Mach Classic port, 8 cf dual-ch, 2-out,ACS | CALL |
| 1195 | B/Mach Classic sta, 7 cf w/TLR300,FSV | CALL |
| 1197 | B/Mach Classic sta, 7 cf w/TLR & 7cf hpr | CALL |
| 1198 | B/Mach Classic sta, 10 cf w/TLR300 FSV | CALL |
| 1199 | B/Mach Classic sta, 20 cf w/TLR300 FSV | CALL |
| 1212 | Handle, 1" ball valve | See 22531 |
| 1213 | Handle, (nylon), 1-1/4" ball vlv | See 22532 |
| 1226 | Needles (20), nozzle press gauge | $19.00 |
| 1232 | Gauge, nozzle pressure kit | $45.00 |
| 1241 | Valve, 1/2" ball with handle | $34.00 |
| 1242 | Valve, pop-up & shaft, 1/2" | $57.00 |
| 1245 | Seat, pop-up valve, 1.35"ID x 2.125"OD | $15.00 |
| 1247 | Valve, abr mtrg, MSV | $145.00 |
| 1249 | Gasket, inspection door, 3" x 4" | $14.00 |
| 1251 | Hose, blast 1/2" ID x 16 ft cpld | $90.00 |
| 1252 | Handle, 1/2" ball valve | $4.00 |
| 1258 | MSV top casting | $39.00 |
| 1259 | MSV bottom casting | $42.00 |
| 1260 | Gasket, MSV valve body | $4.00 |
| 1261 | MSV metering plate & stem | $49.00 |
| 1262 | MSV handle | $13.00 |
| 1263 | Pin, spring, MSV | $2.00 |
| 1266 | Washer, nylon, MSV | $7.00 |
| 1267 | Inspection door asmbly, 3" x 4" | $128.00 |
| 1268 | Hose, blast 1/2" ID x 25 ft cpld | $118.00 |
| 1282 | Filter, air (MS), 1-1/2" AD (Nor) | $609.00 |
| 1283 | Filter, air (MS), 2" AD (Nor) | $609.00 |
| 1284 | Filter, air (MS), 1-1/2" MD (Nor) | $609.00 |
| 1285 | Filter, air (MS), 2" MD (Nor) | $609.00 |
| 1286 | Service kit, air filter (N) gasket/o-ring | $38.00 |
| 1287 | Filter element, air filter (N) | $208.00 |
| 1291 | Louver, air filter (N) | $14.00 |
| 1292 | Filter element, air filter (N), 50 mic - 1" | $94.00 |
| 1294 | Baffle asmbly, air filter (N) | $55.00 |
| 1296 | Insert, air filter (N) | $11.00 |
| 1297 | Bowl w/ MD, air filter (N) 1" model | $103.00 |
| 1299 | Service kit, air filter (N) 1" | $32.00 |
| 1300 | Retainer, air filter (N), 3/4" x 3/8" | $17.00 |
| 1308 | Filter, air (MS), 1/2" manual drain | $99.00 |
| 1314 | O-ring, body, air filter (N) | $6.00 |
| 1317 | O-ring, louver, air filter (N) | $3.00 |
| 1322 | Drain asmbly, auto, air filter (N) | $90.00 |
| 1323 | O-ring, air filter baffle, (N) | $4.00 |
| 1325 | Petcock, air filter (N), manual drain | $14.00 |
| 1328 | O-ring, air filter body (N) | $3.00 |
| 1329 | O-ring, deflector, air filter (N) | $3.00 |
| 1331 | Drain asmbly, MD, air filter (N) | $36.00 |
| 1336 | Sight glass kit, air filter (N) | $52.00 |
| 1337 | Gasket, air filter (N) | $16.00 |
| 1351 | Nozzle, CT-2, 1/8" orifice x 1-3/4" | $57.00 |
| 1352 | Nozzle, CT-3, 3/16" orifice x 1-3/4" | $57.00 |
| 1353 | Nozzle, CT-4, 1/4" orifice x 1-3/4" | $57.00 |
| 1354 | Nozzle, CT-5, 5/16" orifice x 1-3/4" | $57.00 |
| 1355 | Nozzle, CT-6, 3/8" orifice x 1-3/4" | $57.00 |
| 1356 | Nozzle, CT-8, 1/2" orifice x 1-3/4" | $57.00 |
| 1378 | Nozzle, CJD-3, 3/16" orifice x 3" | $131.00 |
| 1379 | Nozzle, CJD-4, 1/4" orifice x 3" | $131.00 |
| 1380 | Nozzle, CJD-5, 5/16" orifice x 3" | $131.00 |
| 1381 | Nozzle, CJD-6, 3/8" orifice x 3" | $131.00 |
| 1382 | Nozzle, CJD-7, 7/16" orifice x 3" | $131.00 |
| 1383 | Nozzle, CJD-8, 1/2" orifice x 3" | $131.00 |
| 1384 | Nozzle, CSD-3, 3/16" orif x 4" | $121.00 |
| 1385 | Nozzle, CSD-4, 1/4" orif x 5-1/4" | $131.00 |
| 1386 | Nozzle, CSD-5, 5/16" orif x 5-5/8" | $137.00 |
| 1387 | Nozzle, CSD-6, 3/8" orif x 6-1/2" | $163.00 |
| 1388 | Nozzle, CSD-7, 7/16" orif x 7-3/4" | $194.00 |
| 1389 | Nozzle, CSD-8, 1/2" orif x 8-13/16" | $252.00 |
| 1394 | Nozzle, SDX-6, 3/8" orif x 6-1/2" | $194.00 |
| 1395 | Nozzle, SDX-7, 7/16" orif x 7-3/4" | $231.00 |
| 1396 | Nozzle, SDX-8, 1/2" orifx8-13/16" | $252.00 |
| 1397 | Nozzle, SDX-10, 5/8" orif x 9" | $336.00 |
| 1398 | Nozzle, SDX-12, 3/4" orif x 9" | $399.00 |
| 1406 | Nozzle, 1/2" Hollo-Blast | $212.00 |
| 1407 | Nozzle, 5/8" Hollo-Blast | $233.00 |
| 1408 | SB nozzle, 1/4" orif x 1-3/4" | $107.00 |
| 1409 | SB nozzle, 5/16" orif x 1-3/4" | $107.00 |
| 1410 | SB nozzle, 5/16" orif x 3" | $149.00 |
| 1411 | SB nozzle, 3/8" orif x 1-3/4" | $107.00 |
| 1412 | SB nozzle, 3/8" orif x 4" | $149.00 |
| 1419 | Nozzle, BSD-4, 1/4" orif x 5-1/4" | $257.00 |
| 1420 | Nozzle, BSD-5, 5/16" orif x 5-5/8" | $273.00 |
| 1421 | Nozzle, BSD-6, 3/8" orif x 6-1/2" | $289.00 |
| 1422 | Nozzle, BSD-7, 7/16" orif x 7-3/4" | $352.00 |
| 1423 | Nozzle, BSD-8, 1/2" orifx8-13/16" | $436.00 |
| 1442 | Nozzle, CAM 4x1, one 1/4" orifice | $257.00 |
| 1444 | Nozzle, CAM 4x3, (3) 1/4" orifices | $257.00 |
| 1445 | Nozzle, CAM 5x1, one 5/16" orifice | $257.00 |
| 1447 | Nozzle, CAM 5x3, (3) 5/16" orifices | $257.00 |
| 1448 | Nozzle, CAM 6x1, one 3/8" orifice | $257.00 |
| 1450 | Nozzle, CAM 6x3, (3) 3/8" orifices | $257.00 |
| 1467 | Nozzle, CSP-6, 3/8" orif, tc | $145.00 |
| 1468 | Nozzle, CSP-8 | Disc |
| 1469 | Nozzle, CSP-10 | See 01475 |
| 1473 | Nozzle, CBP-6 | Disc |
| 1474 | Nozzle, CBP-8, 1/2" orif, boron | $328.00 |
| 1475 | Nozzle, CBP-10, 5/8" orif, boron | $328.00 |
| 1617 | Nozzle, SSD-3, 3/16" orif x 4" | $126.00 |
| 1618 | Nozzle, SSD-4, 1/4" orif x 5-1/4" | $126.00 |
| 1619 | Nozzle, SSD-5, 5/16" orif x 5-5/8" | $142.00 |
| 1620 | Nozzle, SSD-6, 3/8" orif x 6-1/2" | $152.00 |
| 1621 | Nozzle, SSD-7, 7/16" orif x 7-3/4" | $168.00 |
| 1622 | Nozzle, SSD-8, 1/2" orif x 8-13/16" | $221.00 |
| 1623 | Nozzle, SFD-6, 3/8" orif x 6-1/2" | $184.00 |
| 1624 | Nozzle, SFD-7, 7/16" orif x 7-3/4" | $194.00 |
| 1625 | Nozzle, SFD-8, 1/2" orif x 8-13/16" | $226.00 |
| 1666 | Screen, PAC-16 | $290.00 |
| 1667 | Screen, PAC-24 | $370.00 |
| 1668 | PAC pneu abrasive conveyor, 16" | CALL |
| 1669 | PAC pneu abrasive conveyor, 24" | CALL |
| 1680 | Gasket, inspection door PAC | $78.00 |
| 1695 | Swage, rbr-lined, PAC | $124.00 |
| 1696 | Air jet, PAC, 1/4" | $29.00 |
| 1697 | Air jet, PAC, 5/16" | $29.00 |
| 1698 | Air jet, PAC, 3/8" | $29.00 |
| 1699 | Air jet, PAC, 1/2" | $29.00 |
| 1701 | Nipple, 1" x close | $3.00 |
| 1702 | Nipple, 1" x 2" | $4.00 |
| 1706 | Valve guide, pop-up, 1" x 6" | $7.00 |
| 1707 | Nipple, 1" x 7" | $14.00 |
| 1708 | Nipple, 1" x 8" | $15.00 |
| 1715 | Screen, PAC-30 | $395.00 |
| 1716 | Screen, PAC-36 | $479.00 |
| 1717 | Nipple, 1-1/4" x close | $6.00 |
| 1718 | Nipple, 1-1/4" Std pipe x 2" | $4.00 |
| 1719 | Nipple, 1-1/4" x 3" | $5.00 |
| 1721 | Nipple, 1-1/4" x 5" | $6.00 |
| 1722 | Nipple, 1-1/4" x 6" | $8.00 |
| 1724 | Nipple, 1-1/4" x 8" | $15.00 |
| 1726 | Nipple, 1-1/4" x 10" | $16.00 |
| 1729 | Elbow, 3/4" pipe 90 | $4.00 |
| 1733 | Nipple, 1/2" x close | $3.00 |
| 1736 | Nipple, 1/2" x 4" | $3.00 |
| 1737 | Nipple, 1/2" x 5" | $4.00 |
| 1743 | Valve guide, pop-up, 1/2" x 8-1/2" | $10.00 |
| 1750 | Nipple, 1-1/4" x 3" toe | $7.00 |
| 1752 | Nipple, 1-1/4" x 5" toe | $7.00 |
| 1753 | Nipple, 1-1/4" x 6" toe | $13.00 |
| 1754 | Nipple, 1-1/4" x 6-1/2" toe | $16.00 |
| 1757 | Nipple, 1-1/4" x 9 1/2" toe | $19.00 |
| 1761 | Plug, 1" pipe sq head | $4.00 |
| 1762 | Plug, 1-1/4" pipe sq head | $4.00 |
| 1766 | Elbow, 1/2" pipe 90 | $4.00 |
| 1767 | Plug, 3/8" pipe | $4.00 |
| 1768 | Elbow, 1" pipe 90 | $6.00 |
| 1769 | Elbow, 1-1/4" pipe 90 | $9.00 |
| 1770 | Coupling, 3" pipe | See 13236 |
| 1775 | Elbow, 1" 90 street | $6.00 |
| 1781 | Nipple, 1/2" x 8" | $7.00 |
| 1782 | Elbow, 1" pipe 45 | $7.00 |
| 1785 | Tee, 1/4" x 1/4" | $9.00 |
| 1786 | Tee, 3/8" pipe | See 12819 |
| 1787 | Tee, 1/2" pipe | $5.00 |
| 1789 | Tee, 1" pipe | $10.00 |
| 1791 | Nipple, 1-1/2" x close | $13.00 |
| 1801 | Bushing, 1/2" x 1/4" pipe | $4.00 |
| 1802 | Bushing, 1/2" x 3/8" pipe | $4.00 |
| 1804 | Bushing, 1-1/2" x 1" pipe | $8.00 |
| 1805 | Bushing, 1-1/2" x 1-1/4" pipe | $8.00 |
| 1811 | Tee, 1-1/4" x 1" | $21.00 |
| 1812 | Tee, 2" x 2" | $26.00 |
| 1818 | Wye, 1-1/4" pipe | $26.00 |
| 1829 | Nipple, 1/4" x close | $3.00 |
| 1830 | Coupling, 1" pipe | $6.00 |
| 1833 | Coupling, 2" pipe | $16.00 |
| 1839 | Valve guide, pop-up, 1/2" x 6" | $5.00 |
| 1840 | Nipple, 1-1/2" x 2" sch 80 | $11.00 |
| 1841 | Nipple, 1" x 3" toe | $5.00 |
| 1845 | Valve guide, pop-up, 1" x 7" | $11.00 |
| 1854 | Nipple, 1-1/4" x close, hvy duty | $7.00 |
| 1856 | Coupling, 1" compression | $52.00 |
| 1857 | Coupling, 1-1/4" compression | $70.00 |
| 1860 | Nipple, 1-1/4" x 5", hvy duty | See 01721 |
| 1864 | Muffler guide, 1" x 6" toe | $11.00 |
| 1865 | Pusher line, formed, 1" pipe | Disc |
| 1866 | Pusher line, formed, 1-1/4" pipe | Disc |
| 1874 | Nipple, 1-1/4" x 5-1/2" | $10.00 |
| 1884 | Gasket, compress coupling 1/2" | $20.00 |
| 1885 | Gasket, compress coupling 1" | See 01856 |
| 1886 | Gasket, compress coupling 1-1/4" | $12.00 |
| 1888 | Nipple, 3/8" x close | $4.00 |
| 1889 | Bushing, 1" x 3/8" pipe | $3.00 |
| 1897 | Plug, 1/8" pipe | $3.00 |
| 1902 | Regulator, 1/2" (RP & INEX) | $99.00 |
| 1903 | Regulator, 3/4" | $181.00 |
| 1904 | Regulator, 1" with gauge | $265.00 |
| 1906 | Regulator, 1-1/2" with gauge | $307.00 |
| 1908 | Gauge, pr 0-160, 2" face, 1/8 ctr bk mt | $26.00 |
| 1909 | Valve, press relief 125psi 1/4" | $21.00 |
| 1920 | Valve, 1/4" check | $49.00 |
| 1925 | Service kit, abrasive trap | $24.00 |
| 1927 | Service kit, 1-1/2" inlet valve | $34.00 |
| 1928 | Service kit, 1" outlet valve | $37.00 |
| 1929 | Service kit, 1" inlet valve | $23.00 |
| 1935 | Rem cont sys, TLR100, 1" | $609.00 |
| 1936 | Rem cont sys, TLR300, 1-1/4" | $683.00 |
| 1940 | Adaptor, 1/8" npt x 1/4" mjic | $4.00 |
| 1943 | Hose end, 3/16" reusable | $8.00 |
| 1944 | Hose union, 3/16" | $5.00 |
| 1945 | Adaptor, 1/8" npt with 1/16" orif | $11.00 |
| 1948 | Hose end, 1/4" female | $7.00 |
| 1949 | Hose end, 1/4" male | $7.00 |
| 1950 | Plug, 1/4" pipe | $3.00 |
| 1951 | Hose, twinline coupled 50 ft | $82.00 |
| 1952 | Hose, twinline coupled 5 ft | $38.00 |
| 1955 | RLV handle | Disc |
| 1962 | Connector, 1/8" brass hex | $3.00 |
| 1967 | Valve, 1" outlet, piston-type | $229.00 |
| 1968 | Valve body, 1" outlet | $185.00 |
| 1969 | Washer, valve plug, 1" inlet/outlet | $5.00 |
| 1970 | Valve bonnet, 1" outlet | $80.00 |
| 1971 | Plug & spindle guide, 1" outlet | $36.00 |
| 1972 | Valve plug, 1" outlet | $16.00 |
| 1974 | Spring, 7/16" ID x 1-5/8" | $6.00 |
| 1976 | Piston/rod asmbly, 1" outlet | $51.00 |
| 1979 | Washer, 3/8" nylon | $0.80 |
| 1980 | Valve, 1" inlet | $397.00 |
| 1981 | Valve body, inlet 1" | $286.00 |
| 1982 | Spring, compression | $9.00 |
| 1983 | Valve cap, 1" inlet | $78.00 |
| 1984 | Valve plug, 1" inlet | $17.00 |
| 1985 | Valve bottom cap, 1" inlet | $27.00 |
| 1986 | Plug washer retainer, 1" inlet | $15.00 |
| 1987 | Piston/rod asmbly, 1" inlet | $51.00 |
| 1989 | Seal, btm cap, 1" inlet valve | $4.00 |
| 1990 | O-ring, 1-3/4" OD | $3.00 |
| 1992 | O-ring, 3/16" ID x 1/16" | $2.00 |
| 1993 | Petcock, 1/4" npt | $14.00 |
| 1994 | Fitting, 9/16" strt x 1/8" male | $4.00 |
| 1995 | Valve, 1-1/2" inlet | $403.00 |
| 1996 | Valve body, 1-1/2" inlet | $239.00 |
| 1997 | Valve cap, 1-1/2" inlet | $97.00 |
| 1998 | Valve plug washer, 1-1/2" inlet | $7.00 |
| 1999 | Valve plug, 1-1/2" inlet | $20.00 |
| 2000 | Spring, 7/8" ID x 2-1/16" | $8.00 |
| 2001 | Valve bottom cap, 1-1/2" inlet | $53.00 |
| 2002 | Plug washer retainer, 1-1/2" inlet | $20.00 |
| 2003 | Piston/rod asmbly, 1-1/2" inlet | $55.00 |
| 2006 | Gasket, btm cap, 1-1/2" inlet valve | $3.00 |
| 2007 | O-ring, 2-1/4" OD x 1/8" TLR300 | $3.00 |
| 2008 | O-ring, 7/16" OD x 1/16" | $2.00 |
| 2009 | Fitting, 9/16" strt x 1/4" male | $3.00 |
| 2010 | Bushing, 1/4" x 1/8" brass | $7.00 |
| 2011 | Abrasive trap, 1" | $99.00 |
| 2012 | Screen, abrasive trap, 1" | $6.00 |
| 2013 | Abrasive trap o-ring | $4.00 |
| 2014 | Cap, abrasive trap, 1" | $11.00 |
| 2015 | Valve body, abrasive trap | $70.00 |
| 2016 | Abrasive trap cap lock bar | $12.00 |
| 2018 | Abrasive trap, 1/4" | $40.00 |
| 2019 | Muffler, 900/900A control unit | $19.00 |
| 2020 | Screen, abrasive trap, 1/4" | $27.00 |
| 2021 | Cap, abrasive trap, 1/4" | $10.00 |
| 2022 | Plug, abrasive trap, 1/4" | $4.00 |
| 2023 | Bushing, 1" x 1/4" pipe | $5.00 |
| 2024 | Control unit asmbly, 800/800A | $223.00 |
| 2025 | Tee, 1/4" brass | $7.00 |
| 2026 | Adaptor/reducer, 1/4" x 1/8" brass | $5.00 |
| 2027 | Elbow, 1/4" brass street | $7.00 |
| 2028 | Fitting, w/.040 orifice brass | $7.00 |
| 2029 | Control unit, 900/900A | $153.00 |
| 2031 | Control unit button | $17.00 |
| 2032 | Control unit lower body | $88.00 |
| 2033 | Control unit 3-way plunger | $18.00 |
| 2034 | Control unit piston | $25.00 |
| 2035 | Control unit pilot cap | $46.00 |
| 2036 | Control unit lock nut | $9.00 |
| 2037 | Control unit rebuild kit | $58.00 |
| 2038 | Valve, 1" air diaphr | $391.00 |
| 2040 | Screw, cover retaining 1" air | $0.80 |
| 2041 | Cover, air diaphr valve 1" | $70.00 |
| 2042 | Spring, 1" air diaphr valve | $27.00 |
| 2043 | Stem nut, 1" air diaphr valve | $18.00 |
| 2044 | Diaphr washer, 1" air valve | $36.00 |
| 2045 | Diaphr, 1" air valve | $36.00 |
| 2046 | Disc retainer, 1" air diaphr vlv | $107.00 |
| 2047 | Seat, 1" air diaphr valve | $82.00 |
| 2049 | Valve body, 1" air diaphr valve | $212.00 |
| 2050 | Nipple, 1/4" x close, brass | $3.00 |
| 2051 | Valve, 1-1/4" air diaphr | $861.00 |
| 2052 | Stud, 1-1/4" air diaph valve body | $2.00 |
| 2053 | Ring, cover retainer | Disc |
| 2054 | Cover, air diaphr valve 1-1/4" | $72.00 |
| 2055 | Spring, 1-1/4" air diaphr valve | $59.00 |
| 2056 | Nut, stem, 1-1/4" air diaphr vlv | $4.00 |
| 2057 | Diaphr washer, 1-1/4" air valve | $143.00 |
| 2058 | Diaphr, 1-1/4" air valve | $86.00 |
| 2059 | Disc, 1-1/4" air diaphr valve | $18.00 |
| 2060 | Disc retainer, 1-1/4" air diaphr vlv | $177.00 |
| 2061 | Stem, 1-1/4" air diaphr valve | $202.00 |
| 2062 | Disc guide, 1-1/4" air diaph valve | $45.00 |
| 2064 | Valve body, 1-1/4" air diaphr valve | $307.00 |
| 2066 | Valve, abr mtrg, grit | See Sentinel or Quantum |
| 2068 | Grit valve retaining pin | Disc |
| 2070 | Grit valve packing nut | Disc |
| 2072 | Grit valve packing | $7.00 |
| 2076 | Grit valve stem nut | $26.00 |
| 2077 | Grit valve ball & stem | $44.00 |
| 2078 | Grit valve diaphr, sngl or 2 ply | $23.00 |
| 2079 | Spacer ring, outer, grit valve | $101.00 |
| 2080 | Grit valve inner spacer ring | Disc |
| 2081 | Grit valve ball seat | $38.00 |
| 2082 | Grit valve ball seat gasket | $9.00 |
| 2083 | Grit valve body | Disc |
| 2084 | Grit valve clean-out plug | $9.00 |
| 2085 | Grit valve spacer stud | $26.00 |
| 2086 | Grit valve clamp bar | Disc |
| 2087 | Valve, 1" ball check | $61.00 |
| 2088 | Valve, 1-1/4" ball check | $101.00 |
| 2127 | Grit valve clean out asmbly | Disc |
| 2128 | Hose, twinline coupled 25 ft | $62.00 |
| 2129 | Decal, abrasive trap screen | $2.00 |
| 2144 | Disc guide, 1" air diaph valve | $53.00 |
| 2160 | Plunger retainer | $12.00 |
| 2162 | Cplg, hydraulic hose, 1/4" brass | $9.00 |
| 2163 | Hose, twinline bulk, per foot | $2.00 |
| 2164 | Valve, 1/2" inlet | $172.00 |
| 2165 | Seat, 1-1/4" air diaphr valve | $155.00 |
| 2167 | Valve, 1/2" swing check | $49.00 |
| 2170 | Valve body, 1/2" inlet | $63.00 |
| 2171 | Tee, 1/8" brass | $7.00 |
| 2175 | Valve cap, 1/2" inlet/outlet | $22.00 |
| 2176 | Valve plug, 1/2" inlet/outlet btm | $16.00 |
| 2177 | Valve retainer, 1/2" inlet | $10.00 |
| 2178 | Spring, 17/32" OD x 1" | $4.00 |
| 2179 | Valve washer, 1/2" inlet/outlet | $3.00 |
| 2180 | Retaining ring, valve plug, 1/2" inlet/outlet | $1.00 |
| 2181 | Retaining ring, cap, 1/2" inlet/outlet | $4.00 |
| 2182 | O-ring, 1-3/16" ID x 1/8" TLR50 | $1.00 |
| 2184 | O-ring, 7/8" ID x 1/8" TLR50 | $0.90 |
| 2185 | O-ring, 3/4" ID x 3/32" TLR50 | $0.90 |
| 2192 | Piston, 1/2" inlet valve | $31.00 |
| 2193 | Fitting, 1/4" cross brass | $16.00 |
| 2195 | Tie, nylon, 14 1/2" long | $0.90 |
| 2198 | Transformer, 12.6 volt | $52.00 |
| 2199 | Panel, TLR-100/300 120v | $903.00 |
| 2200 | Panel, TLR-100/300 12v | $903.00 |
| 2201 | Conv kit, TLR300 pneu-110v elec | $1,134.00 |
| 2202 | Conv kit, TLR300 pneu-12v elec | $1,071.00 |
| 2204 | Cord, extension 14/2, 50 ft | $170.00 |
| 2205 | Panel, pneu cycle timer 120v | $1,040.00 |
| 2207 | Timer, CA/CAD cycle 120v | $1,701.00 |
| 2216 | Cord, supply, with connectors, 5 ft | $59.00 |
| 2240 | Hose, twinline coupled 3 ft | $36.00 |
| 2243 | Gloves, leather pair | $23.00 |
| 2244 | Gloves, AC cab, rubber, pair | $34.00 |
| 2275 | Plug, twist-lock male 3-wire | $20.00 |
| 2298 | Valve back, 1/2" outlet | $59.00 |
| 2299 | Valve cap, 1/2" outlet | $26.00 |
| 2307 | Handle, 1" ball valve w/grip | $9.00 |
| 2309 | Handle, 1-1/4" vlv & 3/8" stem | DISC |
| 2318 | Umbrella, 4" pop-up valve | $70.00 |
| 2321 | Valve, pop-up & shaft, 4" | $67.00 |
| 2323 | Inspection door asmbly, 4" x 6" | $149.00 |
| 2325 | Seat, pop-up valve, 4"ID x 5.5"OD | $16.00 |
| 2326 | Wheel, 6" rubber tired | $63.00 |
| 2329 | Gasket, inspection door, 4" x 6" | $12.00 |
| 2330 | Screen, 14" blast machine | See 03098 |
| 2331 | Screen, 16" blast machine | See 03099 |
| 2332 | Screen, 24" blast machine | See 03100 |
| 2333 | Screen, 30" blast machine | See 03101 |
| 2334 | Cover, 14" dia blast machine | $74.00 |
| 2335 | Cover, 16" dia blast machine | $80.00 |
| 2336 | Cover, 24" dia blast machine | $107.00 |
| 2337 | Cover, 30" dia blast machine | $231.00 |
| 2342 | Valve guide asmbly, pop-up | $59.00 |
| 2343 | Seat, pop-up valve, 6"ID x 7.5"OD | $49.00 |
| 2345 | Handle, 1-1/4" air cock | $17.00 |
| 2347 | Wheel and axle set, 6" diameter | $124.00 |
| 2350 | Wheel and axle set, 2452 | $212.00 |
| 2365 | Balance tank, 2-outlet machine | $483.00 |
| 2368 | Valve, 2" ball with handle | $143.00 |
| 2369 | Gasket, inspection door, 6" x 8" | $18.00 |
| 2375 | Valve, pop-up & shaft, 5-1/2", w/1/2" stem | $198.00 |
| 2377 | Inspection door asmbly, 6" x 8" | $168.00 |
| 2378 | Valve, pressure relief 130psi 3/4" | $90.00 |
| 2379 | Valve, press relief asmbly 130psi | $153.00 |
| 2380 | Seat, pop-up valve, neoprene | $22.00 |
| 2387 | Pin, spring 3/16" x 1-1/8" | $2.00 |
| 2391 | Screen, 36" blast machine | $731.00 |
| 2396 | Valve, 1" ball with handle | $57.00 |
| 2397 | Valve, 1-1/4" ball with handle | $67.00 |
| 2402 | Axle, 16" diam blast machine | $46.00 |
| 2403 | Axle, 24" diam blast machine | $57.00 |
| 2404 | Axle, 10" & 14" diam blast machine | $34.00 |
| 2409 | B/Mach Classic sta, 8 cf dual-ch 1-outlet | See 01191 |
| 2410 | B/Mach Classic sta, 8 cf dual-ch 2-outlet | See 01193 |
| 2411 | B/Mach Classic port, 8 cf dual-ch, 1-outlet,ACS | See 01192 |
| 2412 | B/Mach Classic port, 8 cf dual-ch, 2-outlet,ACS | See 01194 |
| 2416 | Leg pads (2), 1440/1648/2452 | $61.00 |
| 2422 | FSV upper body | $122.00 |
| 2423 | FSV metering valve disc with stem | $97.00 |
| 2424 | FSV rubber gasket | $7.00 |
| 2425 | FSV disc, stainless | $89.00 |
| 2426 | FSV lower body | $97.00 |
| 2427 | Valve, abr mtrg, FSV | $277.00 |
| 2431 | Spacer, handle bolt, FSV/Sntl | $5.00 |
| 2432 | Pin, valve handle | $2.00 |
| 2433 | Gauge unit FSV/Sntl | $24.00 |
| 2434 | Gasket, abrasive trap screen | $2.00 |
| 2436 | Stud, abrasive valve | $9.00 |
| 2437 | Packing gland, FSV | $5.00 |
| 2438 | FSV packing gland | Disc |
| 2439 | Gasket, shaft abrasive valve | $4.00 |
| 2440 | Inspect plate, FSV/MPV/PVR/Sntl | $15.00 |
| 2454 | Hose, air 3/16" x 18" coupled | $18.00 |
| 2474 | Valve, 2" ball full port | $378.00 |
| 2477 | Plug, 1-1/2" pipe | $5.00 |
| 2494 | Adaptor, 1/4" nps x 1/4" mjic | $3.00 |
| 2495 | Adaptor, 1/4" male tee nps | $13.00 |
| 2498 | Hose, air 3/16" x 3 ft coupled | $22.00 |
| 2511 | Diaphr, 1/2" outlet valve | $19.00 |
| 2512 | Valve, 1/2" diaphr outlet | $90.00 |
| 2513 | Elbow, 1/4" npt x 3/16" hose, brass | $5.00 |
| 2516 | Hose, twinline coupled 16 ft | $51.00 |
| 2518 | Rem cont sys, TLR-50, 1/2" | $399.00 |
| 2525 | Cord, 3 ft whip w/twist-lok | $51.00 |
| 2531 | RLV support bar | Disc |
| 2534 | Spring, .480 OD x .625 long | $3.00 |
| 2539 | Screw, 4-40 x 5/8" flathead sckt | $0.90 |
| 2540 | Screw, 10-24 x 5/8" fl hd phillips | $0.90 |
| 2541 | Insert, rubber, RLV | Disc |
| 2545 | Filter, 1/8" - 20 micron | $80.00 |
| 2549 | RLV handle w/elec actuator | $21.00 |
| 2577 | Nozzle, CBP-5 | Disc |
| 2578 | Nozzle, CSP-5, 5/16" orif, tc | $145.00 |
| 2582 | Cover asmbly for 24" mach w/o flange | $537.00 |
| 2590 | Hose, air 1/2" x 16" w/P-L ftgs | $36.00 |
| 2594 | Abrasive cleaner 2-pot stand w/o cover | CALL |
| 2599 | Gasket, RLV | $2.00 |
| 2601 | SpinBlast for 8" to 36" pipe | $1,512.00 |
| 2602 | SB front carriage body | $164.00 |
| 2603 | SpinBlast service kit for 02601 | $814.00 |
| 2604 | SB rotating nozzle head | $172.00 |
| 2605 | SB rear carriage body | $162.00 |
| 2606 | SB brake housing | $107.00 |
| 2608 | SB brake with lining | $122.00 |
| 2609 | SB tube casting | $139.00 |
| 2610 | SB tube locking ring | $15.00 |
| 2611 | SB double seal light bearing | $92.00 |
| 2612 | SB adjustable legs (each) | $32.00 |
| 2613 | SB bearing seal | $31.00 |
| 2614 | Seal, dust (leather), SB | $5.00 |
| 2615 | SB rear end plate | $89.00 |
| 2616 | Washer, tungsten carbide, SpBlast | $75.00 |
| 2617 | SB npl, 1-1/4" rbr-lined | $101.00 |
| 2618 | SB end plate locking nut | $37.00 |
| 2620 | SB casters, 3" | $55.00 |
| 2626 | SB carriage wheel | $14.00 |
| 2628 | SB brake shoe lock pin | $10.00 |
| 2629 | SB arms (3) with wheels | $233.00 |
| 2630 | SB centering leg set | $185.00 |
| 2633 | Abrasive feed stem | $19.00 |
| 2636 | MCY/VCY abrasive feed asmbly | $111.00 |
| 2638 | Hose, wetblast, 3/16" x 50 ft | $90.00 |
| 2639 | Hose, air 3/16" bulk per foot | $2.00 |
| 2641 | SG300 Suction gun, complete | $536.00 |
| 2642 | SGT air gun asmbly | $101.00 |
| 2643 | SGT suction gun & hose asmbly | $331.00 |
| 2644 | Retaining ring, 3/4" external, SGT | $1.50 |
| 2645 | Screw, 8-32 x 3/8" pan head | $0.90 |
| 2646 | Washer, valve lift SGT | $4.00 |
| 2647 | Spring, 3/8" ID x 1-1/8" | $5.00 |
| 2648 | Washer, (special), SGT | $3.00 |
| 2649 | SGT valve stem, brass | $18.00 |
| 2650 | SGT valve seat, 3/4" OD | $6.00 |
| 2651 | SGT valve seat, brass | $12.00 |
| 2652 | SGT air hose connector | $6.00 |
| 2653 | SGT valve trigger | $17.00 |
| 2654 | SGT body | $58.00 |
| 2655 | Pin, hinge, SGT trigger | $2.00 |
| 2657 | Gasket, SGT valve seat | $3.00 |
| 2658 | SG300 Suction gun less hose/hpr | $299.00 |
| 2659 | SGT air jet with 1/16" orifice | $27.00 |
| 2660 | SGT air jet with 1/8" orifice | $27.00 |
| 2661 | SGT air jet with 3/16" orifice | $27.00 |
| 2662 | SGT air jet with 1/4" orifice | $27.00 |
| 2663 | SGT suction body | $30.00 |
| 2664 | SGT suction body nut | $19.00 |
| 2665 | SGT hose, 1/2" x 10 ft air | $46.00 |
| 2666 | SGT hose, 1/2" x 10 ft material | $36.00 |
| 2667 | Nut, lock SGT air jet | $7.00 |
| 2668 | Sleeve, SGT air jet | $2.00 |
| 2673 | SGT hopper screen | $97.00 |
| 2675 | Hopper, Suction Gun | $155.00 |
| 2676 | Abrasive feed elbow, SGT/cab | $64.00 |
| 2680 | Air jet, INEX, 1/16" orifice | $24.00 |
| 2681 | Air jet, INEX, 1/8" orifice | $24.00 |
| 2682 | Air jet, INEX, 3/16" orifice | $24.00 |
| 2683 | Air jet, INEX, 1/4" orifice | $24.00 |
| 2686 | SH70 suction head asmbly | $97.00 |
| 2687 | SH70 suction body | $72.00 |
| 2688 | SH70 air jet, 1/8" orifice | $24.00 |
| 2689 | SH70 air jet, 3/16" orifice | $24.00 |
| 2690 | SH70 air jet, 1/4" orifice | $24.00 |
| 2691 | SH70 suction body nut | $24.00 |
| 2697 | Sleeve, SH70 air jet | $2.00 |
| 2698 | SH70 hose, 1/2" x 10 ft air | $36.00 |
| 2699 | SH70 hose, 5/8" x 10 ft material | $111.00 |
| 2701 | Wetblast attachment complete | $135.00 |
| 2705 | Connector, hose for wetblast attachment | $13.00 |
| 2706 | Bushing, 1/2" x 1/4" brass | $5.00 |
| 2707 | Petcock, 1/4" m/f thread | $14.00 |
| 2709 | Petcock and hose, Wetblast | $31.00 |
| 2798 | Paint, green - aerosol can | Disc |
| 2801 | Clamp, air hose, Power Gun | $2.00 |
| 2805 | Clamp, 1-1/2" OD | $3.00 |
| 2806 | Clamp, 4-1/2" OD | $7.00 |
| 2808 | Nipple, 1/4" brass hex | $3.00 |
| 2809 | Clamp, 1/2" OD | $3.00 |
| 2816 | Clamp, 3" OD | $10.00 |
| 2817 | Clamp, 2-1/2" OD | $9.00 |
| 2822 | Wheel and axle set, 1648 | $206.00 |
| 2827 | Fitting, 1/8" pipe elbow x 3/16hose | $7.00 |
| 2891 | SG300 Suction gun less hpr/noz/jet | $299.00 |
| 2892 | SG300 Suction gun less nozzle/jet | $515.00 |
| 2898 | Plug, twist-lock female (remote) | $46.00 |
| 2899 | Plug, twist-lock male (remote) | $28.00 |
| 2929 | Connector, 1/2" sealtite straight | $14.00 |
| 2979 | Motor, MCY cab, 2 hp 115/230v, 1 ph | $821.00 |
| 2981 | Motor, 1 hp, 1725rpm, 56C frame | $583.00 |
| 2983 | Motor, VCY cab, 1-1/2 hp | Disc |
| 2984 | Motor, VCY cab, 2 hp | Disc |
| 3051 | Screw, 1/4" x 1/2" hex head | $0.50 |
| 3052 | Screw, 1/4" x 3/4" hex head | $0.60 |
| 3053 | Screw, 1/4" x 1" hex head | $0.70 |
| 3055 | Screw, 1/4" x 1-1/2" hex head | $0.60 |
| 3069 | Screw, 3/4" x 2-1/4" shoulder | $18.00 |
| 3071 | Screw, 1/4" x 1/4" set cup pt,lock | $0.70 |
| 3072 | Screw, 1/4" x 1/2" set cup pt | $0.50 |
| 3075 | Screw, 1/4" x 1/4" set cup pt | $0.70 |
| 3077 | Screw, 1/4" x 3/8" set cone pt | $2.00 |
| 3080 | Screw, 1/4" x 1/2" set square head | $0.80 |
| 3083 | Hose, air 3/16" x 5 ft coupled | $38.00 |
| 3085 | Elbow, 1/8" street | $16.00 |
| 3086 | Screw, 1/4" nf x 3/4" socket head | $0.80 |
| 3087 | Hose, air 3/16" x 50 ft coupled | $65.00 |
| 3098 | Screen, 14" machine, rcsd | $97.00 |
| 3099 | Screen, 16" dia machine, rcsd | $101.00 |
| 3100 | Screen, 24" machine, rcsd | $135.00 |
| 3101 | Screen, 30" machine, rcsd | $328.00 |
| 3104 | Cover asmbly for 24" mach w/flange | $720.00 |
| 3107 | Cover, 10" dia blast machine | $61.00 |
| 3111 | Nut, 1/4" hex | $0.50 |
| 3113 | Nut, 1/4" wing | $0.80 |
| 3116 | Washer, 1/4" flat | $0.50 |
| 3117 | Washer, 1/4" lock | $0.50 |
| 3118 | Washer, lock, 1/4" | $1.00 |
| 3119 | Bolt 1/4" x 3/4" & nut, elevator | $1.00 |
| 3123 | Screw, 1/4" x 3/4" thumb | $0.80 |
| 3131 | Screw, 1/4" x 1" thumb (brass) | $4.00 |
| 3151 | Screw, 5/16" x 3/4" hex head | $0.70 |
| 3152 | Screw, 5/16" x 1" hex head | $0.70 |
| 3153 | Screw, 5/16" x 1-1/4" cone | $0.80 |
| 3213 | Nut, 5/16" wing | $0.80 |
| 3216 | Washer, 5/16" flat | $0.50 |
| 3217 | Washer, 5/16" lock | $0.50 |
| 3251 | Screw, 3/8" x 3/4" hex head cap | $0.70 |
| 3252 | Screw, 3/8" x 1" hex head | $0.70 |
| 3258 | Screw, 3/8" x 2-1/2" hex head | $0.70 |
| 3267 | Screw, 3/8" x 1-1/2" hex head | $2.00 |
| 3270 | Screw, 10-24 x 3/16" set | $0.80 |
| 3272 | Screw, 3/8" x 1/2" set cup pt | $0.70 |
| 3289 | Screw, 3/8" x 1" thumb | $2.00 |
| 3291 | Screw, 3/8" x 3/8" shoulder | $4.00 |
| 3293 | Screw, 3/8" x 3/4" shoulder | $3.00 |
| 3310 | Washer, 3/8" ID x 1-1/4" OD, CPF | $0.80 |
| 3311 | Nut, 3/8" hex | $0.60 |
| 3314 | Nut, 3/8" jam | $0.70 |
| 3316 | Nut, 3/8" NF jam | $0.60 |
| 3317 | Washer, 3/8" flat | $0.60 |
| 3318 | Washer, 3/8" lock | $0.60 |
| 3322 | Screw, 3/8" x 1-1/2" socket set | $1.00 |
| 3331 | Screw, 3/8" x 3/4" hex head | $2.50 |
| 3360 | Cord, 100 ft extension 14/2 | $233.00 |
| 3362 | Screen, 10" blast machine | $126.00 |
| 3363 | Button asmbly, RLV | Disc |
| 3364 | Pin asmbly, RLV handle | Disc |
| 3366 | Cord, 200 ft extension 14/2 | $378.00 |
| 3371 | Valve, 1" diaphr outlet | $244.00 |
| 3376 | Filter element, for 02545 remote | $19.00 |
| 3380 | Rem cont sys, EDC100 1" 12v 1-op | $1,512.00 |
| 3381 | Rem cont sys, EDC300 1-1/4" 120v 1-op | $1,565.00 |
| 3384 | Rem cont sys, EAC100 1" 120v 1-op | $1,512.00 |
| 3385 | Rem cont sys, EAC300 1-1/4" 120v 1-op | $1,565.00 |
| 3393 | Valve cap, 1" diaphr | $61.00 |
| 3425 | Valve, air n/c 120v AC | $76.00 |
| 3426 | Valve, air, n/c 12v DC | $76.00 |
| 3428 | Elbow, male 1/4" tube-1/4" pipe | $7.00 |
| 3429 | Connector, 1/4" tube-1/4" pipe | $7.00 |
| 3438 | Fitting, exh | $16.00 |
| 3439 | Timer, CA/CAD cycle 12v | $1,701.00 |
| 3448 | Rem cont sys, TLR300D 1-1/4" diaphr OV | $683.00 |
| 3449 | Rem cont sys, TLR100D 1", diaphr OV | $609.00 |
| 3452 | Screw, 1/2" x 1" hex head | $0.70 |
| 3454 | Screw, 1/2"NC x 1-1/2" cap | $2.50 |
| 3455 | Screw, 1/2" x 1-3/4" hex head | $2.00 |
| 3457 | Screw, 1/2" x 2-1/2" hex head | $2.00 |
| 3479 | Timer, PAC cycle 12v | $1,407.00 |
| 3480 | Timer, PAC cycle 120v | $1,407.00 |
| 3492 | Screw, 1/2" x 3/4" shoulder | $4.00 |
| 3510 | Nut, 5/8" NF jam, LH thread | $3.00 |
| 3511 | Nut, 1/2" hex | $0.60 |
| 3513 | Nut, 1/2" NC jam | $2.00 |
| 3514 | Nut, 1/2" NF jam | $2.00 |
| 3515 | Washer, 1/2" SAE flat | $0.60 |
| 3516 | Washer, 1/2" lock | $0.60 |
| 3527 | Filter, breathing air, CPF 80 - 4 outlet | $362.00 |
| 3528 | Bushing, 3/8" x 1/4" pipe (brass) | $3.00 |
| 3530 | CPF cap, four outlet | $59.00 |
| 3531 | Spacer, CPF handle, four outlet | $0.70 |
| 3532 | Plug, 1" pipe sq head galv | $4.00 |
| 3535 | CPF inner cap | $21.00 |
| 3536 | Plug, 3/8" pipe brass | $4.00 |
| 3537 | CPF filter adaptor flange gasket | $6.00 |
| 3538 | Gasket, inner, CPF cap | $3.00 |
| 3539 | CPF handle, four outlet | $6.00 |
| 3541 | O-ring, CPF regulator | $0.80 |
| 3542 | CPF pressure regulator | Disc |
| 3545 | Stud, cap, 1/2" x 2", CPF | $1.00 |
| 3547 | Filter cartr, CPF | $47.00 |
| 3557 | CPF base bracket | $35.00 |
| 3559 | Gasket, CPF cap | $7.00 |
| 3561 | O-ring, CPF cap | $7.00 |
| 3565 | CPF filter adaptor plate | $17.00 |
| 3566 | CPF filter adaptor gasket | $9.00 |
| 3567 | Tee, 3/8" street | $13.00 |
| 3568 | CPF filter adaptor spring | $17.00 |
| 3569 | Adaptor kit, CPF filter cartr | $35.00 |
| 3577 | Filter, breathing air, CPF 20 w/o reg | $257.00 |
| 3578 | Filter, breathing air, CPF 20 w/reg | $268.00 |
| 3582 | CPF regulator kit, single outlet | $61.00 |
| 3584 | CPF cap, single outlet | $27.00 |
| 3585 | CPF gauge kit, single outlet | $21.00 |
| 3586 | Cap asmbly, CPF80 , 4-outlet | $191.00 |
| 3594 | CPF regulator | $45.00 |
| 3596 | Nipple, 3/8" hex, brass | $9.00 |
| 3597 | Calibr connector asmbly, CMA | $196.00 |
| 3598 | Gas, test (20 ppm CO) | $65.00 |
| 3603 | Filter, replcmt, CMA | See 23013 |
| 3604 | Regulator/filter, CMA | See 23013 |
| 3623 | Handle, CPF, single outlet | $4.00 |
| 3636 | CCB wheel, steel | $16.00 |
| 3637 | Bushing, wheel CCB/SB | $17.00 |
| 3641 | SpinBlast carriage, 8"- 17" ID | $626.00 |
| 3642 | Panel, EDA-400 dual rem 120v | $1,260.00 |
| 3643 | Panel, EDD-400 dual rem 12v | $1,260.00 |
| 3654 | Leg pad, 1440/1648/2452 RH | $40.00 |
| 3655 | Leg pad, 1440/1648/2452 LH | $40.00 |
| 3689 | Valve, pop-up & shaft, 5-1/2", w/alum sleeve | $258.00 |
| 3699 | Valve, pop-up, w/external sleeve | $92.00 |
| 3706 | Bushing kit, small SB carriage | $23.00 |
| 3707 | Nipple, 1-1/4" x 5-1/2" toe | $8.00 |
| 3710 | Nut, 5/8" lock w/nylon insert | $0.80 |
| 3711 | Nut, 5/8" reg hex | $0.80 |
| 3712 | Nut, 5/8" NF jam | $0.80 |
| 3714 | Screw, 5/8" x 4" sq head | $4.00 |
| 3715 | Washer, 5/8" plain narrow | $2.00 |
| 3720 | Nipple, 3/8" x 2", brass | $7.00 |
| 3781 | Valve, 4" ball full port | $756.00 |
| 3804 | Washer, 3/4" thrust | $3.00 |
| 3805 | Retaining ring, blast mach axle | $2.00 |
| 3824 | Retaining ring, 1" heavy duty | $2.50 |
| 3825 | Washer, 1" thrust | $4.00 |
| 3870 | Screw, 6-32 x 1/4" rnd hd mach | $0.50 |
| 3871 | Screw, 8-32 x 1/4" rnd hd mach | $0.50 |
| 3872 | Screw, 8-32 x 5/16" flat head | $0.50 |
| 3885 | Nut, 10-32 hex | $0.80 |
| 3886 | Screw, 10-24 x 1/2" rnd hd mach | $0.70 |
| 3887 | Screw, 10-24 x 1/2" thumb | $2.00 |
| 3891 | Screw, 10-24 x 1" rnd head mach | $0.70 |
| 3892 | Screw, 10-24 x 2 1/4" rnd hd | $2.00 |
| 3901 | Screw, #10 x 3/8" pan head | $0.50 |
| 3903 | Screw, #10 flat head sheet metal | $0.50 |
| 3968 | Timer, 15-minute cycle | Disc |
| 3970 | Meter, hour | $111.00 |
| 3973 | Transformer (enclosed) | $244.00 |
| 3985 | Valve, diaphr control 900/900A | $101.00 |
| 3986 | Filter element, 1/2" remote for 03987 | $27.00 |
| 3987 | Filter, 1/2" - 20 micron | $172.00 |
| 3988 | Muffler, 1/4" bronze | $9.00 |
| 3990 | Tee, 1/2" pipe (brass) | $19.00 |
| 3991 | Bushing, 1/2" x 1/8" (brass) | $4.00 |
| 3993 | Elbow, 1/8" brass street | $5.00 |
| 3994 | Filter, foam breather 900/900A | $2.00 |
| 3995 | Cover, plastic, 900/900A | $14.00 |
| 3997 | Nipple, 1/2" x close, brass | $5.00 |
| 4018 | Tool, pick-up, AVS 4000, suction 2" | $311.00 |
| 4024 | Dust bag, AVS 4000, 4" x 31-1/4" | $31.00 |
| 4041 | Gauge, vacuum 3"-30" hg | $36.00 |
| 4047 | Hose, AVS, 4" x 12 ft 6 in uncpld | $567.00 |
| 4048 | Hose, AVS conveying, 4" ID, per ft | $55.00 |
| 4049 | Hose, AVS conveying, 3" ID, per ft | $41.00 |
| 4050 | Hose, AVS conveying, 2" ID, per ft | $35.00 |
| 4059 | Bolt, T, AVS flapper valve | $24.00 |
| 4061 | Gasket, AVS flapper valve | $28.00 |
| 4062 | Hinge, AVS flapper valve | $18.00 |
| 4063 | Baffle, rubber, AVS hopper inlet | $51.00 |
| 4065 | Counterweight, AVS | $151.00 |
| 4076 | Extrusion, 3/8" U-chan per foot | $4.00 |
| 4078 | Hose, AVS conveying, 2" x 25 ft | $819.00 |
| 4104 | Cape, outer med wt black | $202.00 |
| 4106 | Holder, NHP-1 (nyl), 3/4" ID | $13.00 |
| 4111 | Valve, 1" inlet CA/CAD timer | $344.00 |
| 4127 | Holder, NHP-2 (nyl), 1" ID | $14.00 |
| 4128 | Holder, NHP-3 (nyl), 1-1/4" ID | $16.00 |
| 4142 | PAC pneu abrasive conveyor, 30" | CALL |
| 4146 | Control unit asmbly, 900/900A | $153.00 |
| 4148 | Valve, 1" inlet 900 sys | $311.00 |
| 4149 | Valve, 1-1/2" inlet, 900A sys | $428.00 |
| 4160 | Spring, AVS silo/hopper | $10.00 |
| 4206 | Cplg installation, per fitting | NO CHARGE |
| 4227 | AVS 50E with 106 cf hopper | CALL |
| 4228 | AVS 50E with 56 cf hopper | CALL |
| 4229 | AVS 50E with 200 cf hopper | CALL |
| 4237 | Clamp, AVS 50 flapper valve | $26.00 |
| 4238 | Gasket, AVS 50 cyclone base | $38.00 |
| 4239 | Gasket, AVS 50 cyclone roof | $170.00 |
| 4241 | Handle, door, AVS 50 | $28.00 |
| 4248 | Dust tube, AVS 50 filter | $40.00 |
| 4261 | Hose, blast 2 braid | See 23750 |
| 4262 | Hose, blast 2 braid | See 23751 |
| 4270 | Pick-up tool, AVS, crev w/swiv 2" | $462.00 |
| 4271 | Pick-up tool, crev w/swiv 3" AVS/CCB | $683.00 |
| 4272 | Pick-up tool, AVS, flare w/swiv 2" | $567.00 |
| 4273 | Pick-up tool, floor w/swiv 3" AVS/CCB | $651.00 |
| 4274 | Pick-up tool, AVS, bulk 2" | $756.00 |
| 4275 | Pick-up tool, bulk 3" AVS/CCB | $819.00 |
| 4276 | Pick-up tool, AVS, bulk 4" | $851.00 |
| 4294 | Belt guard, AVS, electric | $401.00 |
| 4296 | Gasket, AVS blower inlet/outlet | $35.00 |
| 4301 | Hose, blast 2 braid | See 23752 |
| 4302 | Hose, blast 2 braid | See 23754 |
| 4305 | Hose, blast 2 braid | See 23753 |
| 4306 | Hose, blast 2 braid | See 23755 |
| 4307 | Hose, blast 2 braid | See 23756 |
| 4319 | Valve, abr mtrg, PVR grit | $628.00 |
| 4320 | Valve, asmbly air, PVR | $565.00 |
| 4321 | Valve, abr mtrg, MPV | $365.00 |
| 4337 | Coupler, AVS hose end, 2" | $92.00 |
| 4338 | Coupler, AVS hose end, 3" | $103.00 |
| 4339 | Coupler, AVS hose end, 4" | $114.00 |
| 4340 | Coupler, AVS hose end, 5" | $124.00 |
| 4341 | Coupler, AVS, 6" hose | $135.00 |
| 4345 | Manifold, AVS, 4" to (3) 2" w/swvl | $935.00 |
| 4346 | Manifold, AVS, 3" to (2) 2" w/swvl | $672.00 |
| 4347 | Manifold, AVS, 4" to (2) 3" w/swvl | $882.00 |
| 4351 | Hose, blast 4 ply | See 23446 |
| 4352 | Hose, blast 4 ply | See 23445 |
| 4355 | Hose, blast 4 ply | See 23447 |
| 4356 | Hose, blast 4 ply | See 23448 |
| 4357 | Hose, blast 4 ply | See 23450 |
| 4358 | Hose, blast 4 ply | See 23452 |
| 4361 | Lenses, APL 60/600 cover .0075", 25 pk | $18.00 |
| 4364 | Hose, HP helmet, 3/8" x 25 ft starter | $84.00 |
| 4367 | Lenses, APL 60/600 inner .040", 5 pk | $15.00 |
| 4368 | Window latch kit, helmet | $7.00 |
| 4369 | Helmet acoustical foam kit | $12.00 |
| 4370 | Washers, helmet breathing tube, (6) | $6.00 |
| 4371 | Filter kit, helmet inlet | Disc |
| 4372 | Lenses, APL 60/600 cover .003", 25 pk | $18.00 |
| 4373 | Lenses, APL 60/600 intermediate .020", 25 pk | $32.00 |
| 4375 | Service kit, CAT old style | $126.00 |
| 4377 | Sleeve, insulating, CAT | Disc |
| 4381 | Filter kit, ACV | $9.00 |
| 4382 | Clip, helmet belt | $7.00 |
| 4396 | Washer, 1" OD rubber | $2.00 |
| 4397 | Hose, HP helmet, 3/8" x 25 ft extn | $86.00 |
| 4398 | Hose, HP helmet, 3/8" x 100 ft extn | $239.00 |
| 4410 | CAT cool-air tube with belt | $147.00 |
| 4411 | CCT climate control with belt | $210.00 |
| 4413 | Hose, HP helmet, 3/8" x 10 ft starter | $49.00 |
| 4415 | Hose, HP helmet, 3/8" x 50 ft extn | $153.00 |
| 4430 | Belt, APL helmet | $15.00 |
| 4435 | Cape, APL 60, red w/red inner collar | $86.00 |
| 4438 | Screw, 6-32 x 3/8" rnd hd mach | $0.80 |
| 4440 | Valve, ACV | See 100024 |
| 4449 | Latch, draw, helmet | $4.00 |
| 4452 | Gasket, APL 50/60 window | $38.00 |
| 4460 | Strap, chin | $14.00 |
| 4464 | U-clip, helmet cape attach strap | Disc |
| 4510 | Gasket, outer lens box front | $4.00 |
| 4511 | Gasket, inner lens box front | $32.00 |
| 4512 | Cover asmbly, box front | $41.00 |
| 4513 | Box front, WSH | $47.00 |
| 4515 | Box front asmbly for Apollo 60 | $126.00 |
| 4517 | Lens, WSH inner box front, single | $11.00 |
| 4518 | Lenses, WSH cover box front, 25 pk | $37.00 |
| 4520 | Nozzle, SMD-3, 3/16" orif x 4" | $126.00 |
| 4521 | Nozzle, SMD-4, 1/4" orif x 5-1/4" | $126.00 |
| 4522 | Nozzle, SMD-5, 5/16" orif x 5-5/8" | $142.00 |
| 4523 | Nozzle, SMD-6, 3/8" orif x 6-1/2" | $152.00 |
| 4524 | Nozzle, SMD-7, 7/16" orif x 7-3/4" | $168.00 |
| 4525 | Nozzle, SMD-8, 1/2" orif x 8-13/16" | $221.00 |
| 4538 | Nozzle, SMR-3, 3/16" orif x 4" | $126.00 |
| 4539 | Nozzle, SMR-4, 1/4" orif x 5-1/4" | $126.00 |
| 4540 | Nozzle, SMR-5, 5/16" orif x 5-5/8" | $142.00 |
| 4541 | Nozzle, SMR-6, 3/8" orif x 6-1/2" | $152.00 |
| 4542 | Nozzle, SMR-7, 7/16" orif x 7-3/4" | $168.00 |
| 4543 | Nozzle, SMR-8, 1/2" orif x 8-13/16" | $221.00 |
| 4556 | Nozzle, SYD-3 | Disc |
| 4557 | Nozzle, SYD-4 | Disc |
| 4558 | Nozzle, SYD-5 | Disc |
| 4559 | Nozzle, SYD-6 | Disc |
| 4560 | Nozzle, SYD-7 | Disc |
| 4561 | Nozzle, SYD-8 | Disc |
| 4574 | Nozzle, SYR-3 | See 23501 |
| 4575 | Nozzle, SYR-4 | See 23502 |
| 4576 | Nozzle, SYR-5 | See 23503 |
| 4577 | Nozzle, SYR-6 | See 23504 |
| 4578 | Nozzle, SYR-7 | See 23505 |
| 4579 | Nozzle, SYR-8 | See 23506 |
| 4592 | Nozzle, SXD-6, 3/8" orif x 6-1/2" | $184.00 |
| 4593 | Nozzle, SXD-7, 7/16" orif x 7-3/4" | $194.00 |
| 4594 | Nozzle, SXD-8, 1/2" orif x 8-13/16" | $226.00 |
| 4601 | Nozzle, SXR-6, 3/8" orif x 6-1/2" | $184.00 |
| 4602 | Nozzle, SXR-7, 7/16" orif x 7-3/4" | $194.00 |
| 4603 | Nozzle, SXR-8, 1/2" orif x 8-13/16" | $226.00 |
| 4635 | PVR tube, grit valve 1" ID | $30.00 |
| 4648 | Nozzle, SJD-3 | See 01378 |
| 4649 | Nozzle, SJD-4 | See 01379 |
| 4650 | Nozzle, SJD-5 | See 01380 |
| 4651 | Nozzle, SJD-6 | See 01381 |
| 4652 | Nozzle, SJD-7 | See 01382 |
| 4653 | Nozzle, SJD-8 | See 01383 |
| 4702 | Nozzle, SSR-3, 3/16" orif x 4" | $126.00 |
| 4703 | Nozzle, SSR-4, 1/4" orif x 5-1/4" | $126.00 |
| 4704 | Nozzle, SSR-5, 5/16" orif x 5-5/8" | $142.00 |
| 4705 | Nozzle, SSR-6, 3/8" orif x 6-1/2" | $152.00 |
| 4706 | Nozzle, SSR-7, 7/16" orif x 7-3/4" | $168.00 |
| 4707 | Nozzle, SSR-8, 1/2" orif x 8-13/16" | $221.00 |
| 4720 | Nozzle, SJR-3 | See 23507 |
| 4721 | Nozzle, SJR-4 | See 23508 |
| 4722 | Nozzle, SJR-5 | See 23509 |
| 4723 | Nozzle, SJR-6 | See 23510 |
| 4724 | Nozzle, SJR-7 | See 23511 |
| 4725 | Nozzle, SJR-8 | See 23512 |
| 4732 | Nozzle, SFR-6, 3/8" orif x 6-1/2" | $184.00 |
| 4733 | Nozzle, SFR-7, 7/16" orif x 7-3/4" | $194.00 |
| 4734 | Nozzle, SFR-8, 1/2" orif x 8-13/16" | $226.00 |
| 4894 | SB leg set, long (6 ea. 17" lg.) | $109.00 |
| 4895 | SB leg set, medium (6 ea. 8" lg.) | $82.00 |
| 4896 | SB leg set, short (6 ea. 4" lg.) | $76.00 |
| 4897 | Clevis w/cotter pin, SB | $3.00 |
| 4898 | SB 3" wheel, w/clevis pin | $38.00 |
| 4899 | SB 3" wheel set, 6 ea. w/clevis pin | $191.00 |
| 4908 | Hose, 1" air per foot | $9.00 |
| 4914 | Hose asmbly, PAC, 3/4" x 24" | $101.00 |
| 4915 | Hose asmbly, PAC, 3/4" x 40" | $111.00 |
| 4927 | Hose, twinline coupled 10 ft | $44.00 |
| 4937 | SB front (body) collar | $149.00 |
| 4938 | SB rear (lance) collar | $118.00 |
| 4950 | Nozzle, TSR-3 | See 23513 |
| 4951 | Nozzle, TSR-4 | See 23514 |
| 4952 | Nozzle, TSR-5 | See 23515 |
| 4953 | Nozzle, TSR-6 | See 23516 |
| 4954 | Nozzle, TSR-7 | See 23517 |
| 4955 | Nozzle, TSR-8 | See 23518 |
| 4962 | Nozzle, TJR-3 | See 23507 |
| 4963 | Nozzle, TJR-4 | See 23508 |
| 4964 | Nozzle, TJR-5 | See 23509 |
| 4965 | Nozzle, TJR-6 | See 23510 |
| 4966 | Nozzle, TJR-7 | See 23511 |
| 4967 | Nozzle, TJR-8 | See 23512 |
| 4968 | Nozzle, TFR-6 | See 04732 |
| 4969 | Nozzle, TFR-7 | See 04733 |
| 4970 | Nozzle, TFR-8 | See 04734 |
| 4971 | SpinBlast carriage, 12"- 36" ID | $605.00 |
| 4993 | High temp shutdown kit, AVS | $523.00 |
| 4994 | Hose pkg, AVS, 4" - 1-op | CALL |
| 4996 | Hose pkg, AVS, 3" - 2-op | CALL |
| 4997 | Hose pkg, AVS, 2" - 2-op | CALL |
| 4998 | Hose pkg, AVS, 2" - 3-op | CALL |
| 4999 | Level indicator, AVS sand level, 50E | Disc |
| 5011 | Gasket, BClem inspection door | $72.00 |
| 5012 | Cover, BClem inlet | Disc |
| 5013 | O-ring, BClem inlet cover | $26.00 |
| 5016 | Valve, AVS vacuum adjusting | $466.00 |
| 5060 | Muffler screen | $11.00 |
| 5061 | Screw, 8-32 x 4" round head | $2.00 |
| 5062 | Muffler seat | $12.00 |
| 5065 | Muffler exh element | $15.00 |
| 5066 | Muffler guide | Disc |
| 5067 | Muffler cap | $17.00 |
| 5068 | Muffler, blast machine exh | $44.00 |
| 5069 | O-ring, 1-1/4" ID x 1-5/8" muffler | $1.00 |
| 5070 | Retaining ring, muffler | $1.00 |
| 5071 | Diaphr repl kit, pinch tube vlv | $28.00 |
| 5072 | Knob, PVR metering valve | $92.00 |
| 5100 | BClem sta, 60 cf pneu | CALL |
| 5101 | BClem yard, 60 cf pneu | CALL |
| 5102 | BClem hwy, 60 cf pneu | CALL |
| 5103 | BClem sta, 120 cf pneu | See 25746 |
| 5104 | BClem yard, 120 cf pneu | See 25745 |
| 5105 | BClem hwy, 120 cf pneu | See 25744 |
| 5106 | BClem sta, 160 cf pneu | See 25743 |
| 5107 | BClem yard, 160 cf pneu | See 25742 |
| 5108 | BClem hwy, 160 cf pneu | See 25741 |
| 5158 | Hose hanger, BClem | $70.00 |
| 5212 | O-ring, BClem filler, 16" | $51.00 |
| 5248 | BClem grit adjust shaft, 60 cf | $58.00 |
| 5275 | BClem op stn pneu, 2 addl/120 cf | CALL |
| 5276 | BClem op stn pneu, 2 addl/160 cf | CALL |
| 5281 | PAC pneu abrasive conveyor, 36" | CALL |
| 5300 | Screen, fill, for Bclem | Disc |
| 5361 | BClem op stn pneu, 1 addl/160 cf | $1,995.00 |
| 5362 | BClem op stn pneu, 1 addl/120 cf | $1,995.00 |
| 5389 | Trap, water, 16" for B-Clem | $1,764.00 |
| 5434 | Washer, spacer RLX, ss | $0.70 |
| 5452 | Nozzle, TMR-3 | See 23519 |
| 5453 | Nozzle, TMR-4 | See 23520 |
| 5454 | Nozzle, TMR-5 | See 23521 |
| 5455 | Nozzle, TMR-6 | See 23522 |
| 5456 | Nozzle, TMR-7 | See 23523 |
| 5457 | Nozzle, TMR-8 | See 23524 |
| 5484 | Service kit, W/B pump | $269.00 |
| 5500 | W/B inj sys, 1 op/1-1/4" thrd noz/1" | CALL |
| 5501 | W/B inj sys, 2 op/1-1/4" thrd noz/1" | CALL |
| 5506 | W/B noz adaptor only, for 05540 | $78.00 |
| 5507 | W/B noz adaptor only, for 05541 & 05598 | $78.00 |
| 5508 | W/B inj only, 1-1/4" thrd noz, for 05540 | $67.00 |
| 5509 | W/B inj only, contr thrd noz/1", for 05541 | $67.00 |
| 5510 | W/B inj only, contr thrd noz/1-1/4", for 05598 | $67.00 |
| 5516 | O-ring, 1-3/8" ID, for 05541 & 05598 W/B inj | $0.80 |
| 5523 | O-ring, 1-1/4" ID, for 05540 W/B inj | $0.80 |
| 5524 | Fitting, hydraulic hose, wetblast inj sys | $12.00 |
| 5527 | Hose, W/B hydraulic, 50 ft | $202.00 |
| 5528 | Valve, needle, wetblast inj sys | $61.00 |
| 5529 | Muffler, wetblast inj sys | $28.00 |
| 5530 | Filter/regulator, 1/2" with gauge | $149.00 |
| 5531 | CAP-4 lubricator, 1/2" | $70.00 |
| 5532 | Pump, water, wetblast inj sys | $2,021.00 |
| 5534 | W/B inj asmbly, 1" for 05541 | $124.00 |
| 5535 | W/B inj asmbly, 1-1/4" for 05598 | $124.00 |
| 5536 | W/B inj asmbly, 1" for 05540 | $124.00 |
| 5537 | Anti-freeze inj asmbly | $139.00 |
| 5540 | W/B noz adaptor asmbly, 1-1/4" thrd, 1" | $226.00 |
| 5541 | W/B noz adaptor asmbly, cont thrd, 1" | $226.00 |
| 5553 | Belt guard, AVS, diesel | Disc |
| 5558 | Valve, AVS fuel check, 1/4" | $65.00 |
| 5570 | AVS 50D with 56 cf hopper | CALL |
| 5571 | AVS 50D with 106 cf hopper | CALL |
| 5572 | AVS 50D with 200 cf hopper | CALL |
| 5590 | Hopper, AVS, 56 cf/2.5 ton | CALL |
| 5591 | Hopper, AVS, 106 cf/5.0 ton | CALL |
| 5592 | Hopper, AVS, 200 cf/10.0 ton | CALL |
| 5598 | W/B noz adaptor asmbly, cont thrd 1-1/4" | $226.00 |
| 5605 | Fitting, female bulkhead | $10.00 |
| 5616 | Anti-freeze inj, 1/4" | $90.00 |
| 5617 | Filter w/auto drain, 1/4" (remotes) | $103.00 |
| 5621 | Panel, ACS, 12v, single oper | $1,260.00 |
| 5622 | Panel, ACS, 12v, dual oper | $1,680.00 |
| 5623 | Switch asmbly, electric, ACS | $412.00 |
| 5628 | B/Mach Classic port, 6 cf LoPot 1" | CALL |
| 5629 | B/Mach Classic port, 6 cf LoPot 1-1/4" | CALL |
| 5633 | Spring, FSV | $5.00 |
| 5641 | Valve seat, pop-up, BClem, 8"ID x 9.5"OD | $55.00 |
| 5643 | Valve, pop-up, BClem | $338.00 |
| 5644 | Cover, BClem tank | $72.00 |
| 5645 | Screen, BClem tank | $51.00 |
| 5668 | PVR valve clamp asmbly | $17.00 |
| 5672 | PVR valve flg adapt, 45 deg | $70.00 |
| 5673 | PVR valve flange adaptor | $27.00 |
| 5674 | PVR valve cover plate | $21.00 |
| 5677 | Valve body, PVR | $86.00 |
| 5680 | Valve, abr mtrg, LPV for LoPot | $311.00 |
| 5687 | PVR return spring plate | $9.00 |
| 5691 | PVR valve lock stud | $18.00 |
| 5801 | RLX rem cont handle w/twist-lok | $139.00 |
| 5810 | Clamp, RLX switch cord | $5.00 |
| 5813 | RLX electric switch w/cord | See 24842 |
| 5814 | Screw, 8-32 x 3/8" round head | $0.60 |
| 5815 | Nut, 8-32 lock | $2.00 |
| 5816 | Washer, #10 flat | $0.70 |
| 5817 | Screw, 3/16" x 1-1/4" shoulder | $4.00 |
| 5818 | Screw, 4-40 x 3/8" fillister head | $0.60 |
| 5819 | Screw, 8-32 x 1" round head | $0.60 |
| 5820 | RLX jet o-ring | Disc |
| 5821 | Bumper, button, RLX | $2.00 |
| 5823 | Spring, torsion RLX lever | $2.00 |
| 5827 | FF elevator drive shaft | $179.00 |
| 5836 | Gear reducer, 20:1 flange mnt | CALL |
| 5882 | FF roller chain, #50 - 42 pitch | $52.00 |
| 5883 | FF connect arm, 3/4" bushings | $576.00 |
| 5885 | FF arm adjusting screw, 5/8" dia | $71.00 |
| 5887 | FF connect block LH, 3/4" bushing | $135.00 |
| 5890 | FF pan drive arm w/ 3/4" bushings | $270.00 |
| 5893 | FF idler sprocket asmbly | $112.00 |
| 5937 | FF double chain hanger kit | $122.00 |
| 5938 | FF double chain support bar kit | $177.00 |
| 5939 | FF double chain support bar | $135.00 |
| 6011 | FF bushing, screw section | $52.00 |
| 6024 | FF bushing 33/64" ID x 3/4" OD | $26.00 |
| 6025 | FF drive box asmbly | CALL |
| 6026 | FF drive box cam asmbly | $183.00 |
| 6029 | FF drive box bumper pad asmbly | $84.00 |
| 6034 | FF bushing 41/64" ID x 7/8" OD | $26.00 |
| 6036 | FF drive box link asmbly w/bushing | $100.00 |
| 6044 | FF drive box spreader, w/spacer | $168.00 |
| 6047 | FF drive box thrust spcr 27/32"OD | $15.00 |
| 6048 | FF drive box bushing | $19.00 |
| 6049 | FF drive box hex access plug | $15.00 |
| 6051 | FF drive box link arm rod | $25.00 |
| 6052 | FF drive box cam shaft w/keys | $142.00 |
| 6053 | FF pan drive arm w/bushing | $280.00 |
| 6054 | FF drive box cam follower bearing | $65.00 |
| 6056 | FF drive box frame weldment | $525.00 |
| 6057 | FF drive box flange brg, 1-3/16" | $102.00 |
| 6058 | Ring, snap, 0.50" diameter, FF | $3.00 |
| 6066 | FF screw section redi-change | $126.00 |
| 6068 | FF drive shaft, 1-1/2" diam (spec JO# & length) | CALL |
| 6069 | FF screw section coupling shaft | $228.00 |
| 6072 | FF cross conveyor sprocket | $71.00 |
| 6073 | Bushing, P1 w/1 3/16 bore | $53.00 |
| 6074 | Bushing, P1 w 1 1/2 bore | $54.00 |
| 6078 | FF chain coupling w/cover | $295.00 |
| 6079 | FF 30:1 reducer w/1-3/16" bore (spec JO#) | CALL |
| 6085 | FF pan drive link dust boot | $33.00 |
| 6087 | FF stiffener yoke w/ 1/2" bushing | $270.00 |
| 6088 | FF anti-sway bar kit | $177.00 |
| 6090 | FF drive box connect arm asmbly | $370.00 |
| 6092 | FF block w/bushing | $126.00 |
| 6093 | FF arm bushing | $33.00 |
| 6094 | FF block bushing | $48.00 |
| 6095 | FF cam shaft sprocket w/bushing | $112.00 |
| 6096 | FF screw shaft sprocket w/bushing | $112.00 |
| 6097 | FF single chain hanger kit | $78.00 |
| 6098 | FF chain hanger kit bearing | $31.00 |
| 6102 | FF chain connecting link, #40 | $13.00 |
| 6105 | Mastic seal, per foot | $3.00 |
| 6109 | FF pillow block bearing, 1-1/2" | $235.00 |
| 6114 | FF double drive box asmbly | CALL |
| 6135 | Valve body, 1" diaphr | $135.00 |
| 6147 | Panel, pneu cycle timer 12v | $1,176.00 |
| 6149 | Diaphr, 1" outlet valve | $26.00 |
| 6151 | FF chain coupling cover | $146.00 |
| 6167 | Cord, 300 ft extension 14/2 | $473.00 |
| 6179 | Extrusion, 1/4" U-chan per foot | $7.00 |
| 6190 | Lenses, for cab window 12212, 5-pk | $13.00 |
| 6203 | Hinge kit, door | $595.00 |
| 6209 | FF cam follower | $56.00 |
| 6211 | Window glass, opaque wire, 17" x 48" | $280.00 |
| 6218 | Viewer, blast room, without cover | $91.00 |
| 6224 | Viewer kit, blast room, with cover | $177.00 |
| 6237 | Seal, blast room | $45.00 |
| 6241 | Screen, air inlet, 24" long | $31.00 |
| 6242 | Screen, air inlet, 36" long | $40.00 |
| 6265 | Screen, window 13.5" x 20.5" | $25.00 |
| 6266 | Foot valve asmbly, 3 way (press cab) | $454.00 |
| 6327 | Plug, twist-lock female 3-wire | $67.00 |
| 6360 | Hose, air 1/2" x 12 ft w/ftgs | $51.00 |
| 6362 | Hose, air 1/2" x 78" blow-off | $40.00 |
| 6369 | Hose end, 1/2" barb x 3/8" npt | $7.00 |
| 6373 | Elbow, 1/4" brass 90 | $5.00 |
| 6379 | Reclaimer | See 12402 |
| 6380 | Reclaimer | See 12400 |
| 6381 | Reclaimer | See 12398 |
| 6382 | Filter, dry, 300 cfm | See 12699 |
| 6385 | Pulley, elevator btm, 8" x 6" wing | $455.00 |
| 6386 | Pulley, lagged, elevator top, 6" x 4" | $320.00 |
| 6407 | Drive shaft, elevator | $235.00 |
| 6409 | Idler shaft, elevator, 1-3/16" | $157.00 |
| 6410 | Pulley, split, elevator top, 6" x 4" | $460.00 |
| 6411 | Bushing, pulley, elevator, 6" | $110.00 |
| 6412 | Pulley, split, elevator btm, 8" x 6" | $687.00 |
| 6413 | Bushing, pulley, elevator, 8" | $205.00 |
| 6414 | Belting, elevator, 4" wide, per foot | $15.00 |
| 6418 | Splice bar, elevator, 4" wide | $98.00 |
| 6419 | Bearing, take-up, elevator, 1-3/16" | $181.00 |
| 6427 | Recovery sys, hopper, 2 x 2 | CALL |
| 6453 | Bearing, idler, elevator boot, 1-3/16" | $112.00 |
| 6457 | Idler shaft, boot, elevator, 1-3/16" | $161.00 |
| 6460 | Seal, elevator idler shaft | Disc |
| 6465 | Reducer, 20:1 w/torq arm, elevator | Disc |
| 6468 | Recovery sys, hopper, 3 x 3 | CALL |
| 6486 | Bucket, elevator, polyethylene | $11.00 |
| 6488 | Belt asmbly, elev, FF, w/poly bkt-32 ft | $977.00 |
| 6491 | Belt asmbly, 3 x 3, w/poly bkt, 36.5 ft | $1,026.00 |
| 6493 | Housing, 600 cfm direct drive | $669.00 |
| 6494 | Belt asmbly, B/E, w/poly bkt - 38.5ft | $1,038.00 |
| 6496 | Dust coll, 600 cfm, for Abr Clnr | CALL |
| 6604 | Gauge asmbly, differ pressure | $255.00 |
| 6618 | Dust bag, S-hook special | $6.00 |
| 6630 | Dust bag, S-hook | $6.00 |
| 6646 | Dust bag, 4" x 126" long | $27.00 |
| 6679 | Timer, shaker sync motor | $1,184.00 |
| 6805 | Drum shaft, 1" x 33 1/4" | $112.00 |
| 6811 | Abrasive cleaner reducer, 60:1 | $1,070.00 |
| 6812 | Bearing, idler, 1" bore, BRAC | $154.00 |
| 6855 | Abrasive cleaner attach seal | $42.00 |
| 6856 | Abrasive cleaner attach kit, 30" | $827.00 |
| 6857 | Abrasive cleaner attach kit, 36" | $834.00 |
| 6970 | Valve, FlatTrak, 3-way norm-closed | $261.00 |
| 7498 | ELS-3-290 w/wet drum 17cf hopper | CALL |
| 7505 | Gasket, blast room door per foot | $19.00 |
| 7512 | Drum cover without filter | $827.00 |
| 7513 | Drum cover with cloth filter asmbly | $1,096.00 |
| 7514 | Gasket, VPR 150/290 cfm | $15.00 |
| 7515 | Air jet, VPR 150 cfm, rubberized | Disc |
| 7516 | Air jet, VPR 290 cfm, rubberized | $67.00 |
| 7517 | Venturi tube, VPR 150 cfm | $483.00 |
| 7518 | Venturi tube, VPR 290 cfm | $546.00 |
| 7520 | Gauge, pressure, liq filled, VPR | $58.00 |
| 7524 | VPR body, 150/290 cfm | $418.00 |
| 7529 | Filter, cloth, rplcmnt, VPR | $21.00 |
| 7531 | Nipple, 1-1/2" x 10", VPR | $61.00 |
| 7556 | Hopper, ELS loading, 24" | $1,302.00 |
| 7566 | Adaptor, VPR air jet, 150 cfm | $311.00 |
| 7568 | Storage drum, 6 cf cap ELS | $1,355.00 |
| 7571 | VPR vacuum prod w/o silencer, 150cfm | Disc |
| 7578 | ELS-1-290 w/wet dust drum | CALL |
| 7584 | VPR vacuum prod w/silencer, 150cfm | Disc |
| 7585 | VPR vacuum prod w/silencer, 290cfm | CALL |
| 7594 | Silencer, VPR 150/290 cfm | $701.00 |
| 7596 | Valve, 1-1/2" ball | $202.00 |
| 7598 | Adaptor, VPR air jet, 290 cfm | $311.00 |
| 7599 | VPR vacuum prod w/o silencer, 290cfm | $1,281.00 |
| 7625 | RLX rem contr handle asmbly w/ACS, pneu | $153.00 |
| 7650 | Panel, ACS, 120v, single oper | $1,260.00 |
| 7651 | Panel, ACS, 120v, dual oper | $1,680.00 |
| 7654 | Switch asmbly, pneumatic, ACS | $114.00 |
| 7655 | Switch guard, ACS pneumatic switch | $11.00 |
| 7657 | Muffler, breather, ACS, 1/8" | $11.00 |
| 7658 | Valve, 3-way, ACS, manual, 1/8" | $52.00 |
| 7662 | Valve, air 3-way, 12v AC | $67.00 |
| 7664 | Valve, air 3-way, 12v DC | $70.00 |
| 7674 | Switch, ACS on/off | $118.00 |
| 7676 | Panel, EAC-400 120v, sngl oper | $903.00 |
| 7677 | Panel, EAC-400 12v, sngl oper | $798.00 |
| 7682 | Conv kit, TLR-100/300 ACS | $987.00 |
| 7714 | Cplg, CQP-4 (nyl), 2-3/8" hose | $18.00 |
| 7715 | Cplg, CFP-2 (nyl), 1-1/2" thrd w/o npl | $27.00 |
| 7716 | Holder, CFP (nyl), for 1-1/4" thrd nozzle | $21.00 |
| 7718 | Holder, FHP (nyl), for flgd nozzle | $18.00 |
| 7719 | Holder, CFPM (nyl), for contr thrd nozzle | $21.00 |
| 7720 | Holder, HEP-1 (nyl), 1-1/2" OD for 1-1/4" thrd noz | $13.00 |
| 7721 | Holder, HEP-2 (nyl), 1-7/8" OD for 1-1/4" thrd noz | $14.00 |
| 7722 | Holder, HEP-3 (nyl), 2-5/32" OD for 1-1/4" thrd noz | $16.00 |
| 7729 | Hose, supa blast | See 23106 |
| 7730 | PVR tube, air valve 1-1/4" ID | $36.00 |
| 7750 | W/B inj sys, 1 op/contr thrd noz/1" | CALL |
| 7751 | W/B inj sys, 2 op/contr thrd noz/1" | CALL |
| 7752 | W/B inj sys, 1 op/contr thrd noz/1-1/4" | CALL |
| 7753 | W/B inj sys, 2 op/contr thrd noz/1-1/4" | CALL |
| 7814 | Service kit, 1/2" inlet valve | $38.00 |
| 8412 | Cplg, CQP-1 (nyl), for 1-1/2" OD hose | $18.00 |
| 8413 | Cplg, CQPS-2 (nyl), for 1-7/8" OD hose | $18.00 |
| 8414 | Cplg, CQP-3 (nyl), for 2-5/32" OD hose | $16.00 |
| 8443 | Plug, cap, helmet inner shell | $0.80 |
| 8446 | Hollo-Blast (tc tip) with 5/8" noz | $746.00 |
| 8447 | Service kit, ACV metering shaft | Disc |
| 8449 | Disconnect, male x 1/4" fem thrd | $4.00 |
| 8454 | Suspension asmbly, WSH | Disc |
| 8474 | Timer, PAC cycle 1-1/4" 12v | $1,428.00 |
| 8475 | Timer, PAC cycle 1-1/4" 120v | $1,428.00 |
| 8740 | Collar, inner, APL 60 | $24.00 |
| 8741 | Window frame kit, helmet | $21.00 |
| 8751 | Filter, diesel fuel, AVS | $92.00 |
| 8756 | Gauge, vacuum, AVS | $82.00 |
| 8759 | Thermometer, AVS | $107.00 |
| 8761 | Sheave, blower, AVS | $233.00 |
| 8763 | Bushing, AVS blower sheave | $51.00 |
| 8765 | Belt set, (4) AVS 50D | $130.00 |
| 8766 | Belt set, (4), AVS 50E | $177.00 |
| 8774 | Coupling, victaulic, 6" w/gasket, AVS | $109.00 |
| 8775 | Clamp, AVS coupler, 5" | $103.00 |
| 8776 | Clamp, AVS coupler, 4" | $65.00 |
| 8777 | Clamp, AVS coupler, 3" | $57.00 |
| 8778 | Coupling, AVS reducing, 5" to 4" | $126.00 |
| 8780 | Hose, AVS connector, 6" ID, per foot | $128.00 |
| 8788 | Coupling, AVS reducing, 4" to 3" | $149.00 |
| 8803 | Filter, oil, AVS 50 | $65.00 |
| 8807 | Hose, AVS conveying, 5" x 50 ft | CALL |
| 8808 | Hose, AVS conveying, 5" x 25 ft | CALL |
| 8809 | Hose, AVS conveying, 4" x 25 ft | $1,785.00 |
| 8810 | Hose, AVS conveying, 3" x 25 ft | $1,029.00 |
| 8825 | CCT body | $46.00 |
| 8826 | Orifice, hot end, CCT | $14.00 |
| 8827 | Plug, CCT | $12.00 |
| 8829 | Retainer, threaded, CCT | $18.00 |
| 8830 | Valve plate, lower, CCT | $9.00 |
| 8831 | Valve plate, upper, CCT | $9.00 |
| 8832 | Washer, support, CCT | $12.00 |
| 8833 | Connector, outlet, CAT/CCT | $18.00 |
| 8834 | CCT body housing | $40.00 |
| 8835 | Control lever, CCT | $10.00 |
| 8836 | Spacer, CCT | $7.00 |
| 8838 | Pin, valve plate, CCT | $4.00 |
| 8844 | Spring, CCT | $4.00 |
| 8845 | Seal kit, CCT | $10.00 |
| 8846 | Venturi asmbly, cool end, CCT | $15.00 |
| 8852 | Gasket, CQGP-1 coupling, 10 pk | $19.00 |
| 8853 | Gasket, CQGP-3 coupling, 10 pk | $22.00 |
| 8869 | Elbow, 1/4" male, CAT/CCT | $7.00 |
| 8870 | Seal kit, CAT | $11.00 |
| 8871 | Venturi kit, CAT cool end | $14.00 |
| 8912 | Inlet fitting kit, helmet | $12.00 |
| 8920 | Suit, blast, leather/cotton, S | $226.00 |
| 8921 | Suit, blast, leather/cotton, M | $226.00 |
| 8922 | Suit, blast, leather/cotton, L | $231.00 |
| 8923 | Suit, blast, leather/cotton, XL | $231.00 |
| 8924 | Nut, #6 machine | $0.50 |
| 8942 | CPF gasket and o-ring kit | $13.00 |
| 8961 | CAT cool-air tube body | $46.00 |
| 8962 | Valve stem, CAT | $23.00 |
| 8963 | Valve insert, CAT | $17.00 |
| 8964 | Vortex breaker, CAT/CCT | $17.00 |
| 8965 | Vortex tube, CAT/CCT | $12.00 |
| 8966 | Spacer, thin, #1, CAT/CCT | $9.00 |
| 8967 | Venturi tube, CAT/CCT | $15.00 |
| 8968 | Spacer, thick, #2, CAT/CCT | $9.00 |
| 8971 | Connector, outlet, 3/4" maile, CAT/CCT | $14.00 |
| 8972 | Washer, CAT/CCT #12 conical spring | $2.00 |
| 8973 | Screen, 40-mesh, CAT/CCT/CCAC | $2.00 |
| 8974 | Bracket, CAT/CCT belt | $7.00 |
| 8975 | O-ring, 3/4" OD x 3/32" | $3.00 |
| 8976 | O-ring, 11/16" x 1/16" | $2.00 |
| 8977 | O-ring, 9/16" OD x 1/8" | $2.00 |
| 8978 | O-ring, 1/2" ID x 1/16" | $2.00 |
| 8980 | Screw, 10-24 x 1/4" round head | $0.50 |
| 8981 | Heat shield, CAT/CCT/CCAC | $16.00 |
| 8983 | Filter screen kit, CAT/CCT | $5.00 |
| 8985 | Knob w/set screws, CAT | $11.00 |
| 10188 | Gauge, differential press, 0-15" | $166.00 |
| 10196 | Dust drum, 55 gal. | $756.00 |
| 10261 | Timer board, 120v - 3-channel | $656.00 |
| 10262 | Solenoid for RP colls | See 23869 |
| 10286 | CCB hose, 3" vacuum per foot | $25.00 |
| 10289 | Abrasive cleaner attach kit, 24" | $219.00 |
| 10290 | Latch, Elevator/ELS/RP | $12.00 |
| 10295 | Clamp, cloth filter, ELS | $14.00 |
| 10332 | CCB hose, 2" vacuum per foot | $17.00 |
| 10338 | Bushing, 3/8" x 1/2" pipe galv | See 12746 |
| 10342 | B/Mach cab, 2462 Aerolyte | CALL |
| 10392 | Valve, pulse, 1", RP/CDF | $181.00 |
| 10491 | Recl, press, 900 cfm 16" A w/2 hp exh | CALL |
| 10505 | Helmet, APL 60HP, ACV, less resp hose | $588.00 |
| 10508 | Helmet, APL 60HP, CAT, less resp hose | $651.00 |
| 10509 | Helmet, APL 60HP, CCT, less resp hose | $698.00 |
| 10510 | Helmet, APL 60HP, ACV,50ft hose | $693.00 |
| 10511 | Helmet, APL 60HP, CAT,50ft hose | $756.00 |
| 10512 | Helmet, APL 60HP, CCT,50ft hose | $798.00 |
| 10513 | Helmet, APL 60HP, ACV,hose,CPF | $908.00 |
| 10514 | Helmet, APL 60HP, CAT,hose,CPF | $966.00 |
| 10515 | Helmet, APL 60HP, CCT,hose,CPF | $1,008.00 |
| 10530 | Window frame, APL 50 | $23.00 |
| 10531 | Lenses, APL 50 cover .0075", 25 pk | $20.00 |
| 10532 | Suspension asmbly - web type, APL 20 & 60 | $28.00 |
| 10534 | Strap, cape attachment, APL 20 & 60 | $19.00 |
| 10538 | Lenses, APL 50 inner .040", 5 pk | $15.00 |
| 10546 | SB spinblast head, large | $307.00 |
| 10547 | SpinBlast for 36" to 60" pipe | $1,533.00 |
| 10559 | SB leg set, xl (6 ea 36" lg) | $282.00 |
| 10560 | SpinBlast carriage, 36"- 60" ID | $575.00 |
| 10562 | RLX pneumatic adaptor | $16.00 |
| 10563 | Gasket, RLX pneumatic adaptor | $3.00 |
| 10564 | Lever lock, RLX | $4.00 |
| 10565 | RLX rem contr handle asmbly, pneumatic | $80.00 |
| 10568 | RLX body | $20.00 |
| 10570 | Hose, supa blast | See 23105 |
| 10573 | RLX handle | $19.00 |
| 10715 | Valve, relief, 3/4" 65 psi | $183.00 |
| 10750 | Filter asmbly, 1-1/2" | CALL |
| 10751 | Filter cartr, for 10750 | $193.00 |
| 10755 | Hose, air, INEX, 1/2" x 84" | $44.00 |
| 10756 | Hose, air, INEX, 1/2" x 60" | $31.00 |
| 10759 | Grating, INEX 3036 | $88.00 |
| 10761 | Grating, INEX 3048 | $103.00 |
| 10762 | Bracket, INEX foot valve | $83.00 |
| 10767 | Light shield, INEX | $62.00 |
| 10769 | Light switch/receptacle combo, INEX | $28.00 |
| 10779 | INEX 3036R | See 14425 |
| 10780 | INEX 3048R | See 14425 |
| 10781 | Gauge, press reg, 1-1/4" 50 psi | $195.00 |
| 10782 | Recl, press, 600 cfm 16" A w/1 hp exh | CALL |
| 10786 | Hose, media, INEX, 5/8" x 72" | $88.00 |
| 10787 | Cover plate, receptacle, INEX | $4.00 |
| 10793 | Hopper and stand, ELS, 17 cu.ft. | CALL |
| 10806 | Cplg, CFP-P (nyl) 1-1/4" thrd | $21.00 |
| 10809 | Abrasive feed elbow adj sleeve | $21.00 |
| 10811 | Reducer, 2" x 1" | $19.00 |
| 10812 | Epoxy for CFP-P coupling | $5.00 |
| 10815 | BClem sta, 60 cf 12v | CALL |
| 10816 | BClem yard, 60 cf 12v | CALL |
| 10817 | BClem hwy, 60 cf 12v | CALL |
| 10818 | BClem sta, 120 cf 12v | See 24626 |
| 10819 | BClem yard, 120 cf 12v | See 24627 |
| 10820 | BClem hwy, 120 cf 12v | See 24625 |
| 10821 | BClem sta, 160 cf 12v | See 24623 |
| 10822 | BClem yard, 160 cf 12v | See 24624 |
| 10823 | BClem hwy, 160 cf 12v | See 25802 |
| 10824 | BClem op stn elec, 1 addl/120 cf | CALL |
| 10825 | BClem op stn elec, 2 addl/120 cf | CALL |
| 10826 | BClem op stn elec, 1 addl/160 cf | CALL |
| 10827 | BClem op stn elec, 2 addl/160 cf | CALL |
| 10828 | Connector, elec Lo-Profile male | $26.00 |
| 10829 | Connector, elec Lo-Profile female | $26.00 |
| 10831 | Cord, 12vdc supply pigtail, Lo-Prof | $52.00 |
| 10833 | Cord, 5 ft 16/2, Lo-Profile | $52.00 |
| 10835 | Cord, 50 ft 16/2, Lo-profile | $153.00 |
| 10836 | Cord, 100 ft 16/2, Lo-profile | $212.00 |
| 10840 | RLX rem contr handle asmbly, elec | $143.00 |
| 10847 | Cord, 50 ft w/ACS switch (lo-profile) | $475.00 |
| 10894 | Service kit, SpinBlast 10547 | $919.00 |
| 10897 | Screw, 10-24 x 1" ctsk mach | $0.60 |
| 10898 | SB retainer ring | $85.00 |
| 10899 | SB main body | $712.00 |
| 10907 | Plug, clean out, INEX | Disc |
| 10908 | Latch, door, INEX | $65.00 |
| 10985 | Regulator, S/K, 1 1/4 pilot op | $632.00 |
| 10987 | Sensor, level | $422.00 |
| 11013 | Pusher line, formed 1/2" pipe | $40.00 |
| 11086 | Coupling, 1/2" compression | $40.00 |
| 11090 | Hopper, 700 cf bulk abrasive | Disc |
| 11094 | Filter cartr, INEX coll, 6.5" L | $52.00 |
| 11097 | Filter/regulator, INEX cab | $206.00 |
| 11132 | Gas, impurity free for CO monitors | $82.00 |
| 11183 | CCB gasket, connection elbow | $15.00 |
| 11203 | Lock pins, coupling (25 pk) | $12.00 |
| 11211 | Hose, INEX coll filter | $96.00 |
| 11215 | Glove set (12710 & 12711) | $55.00 |
| 11221 | CCB hose reducer, 3" to 2" | $54.00 |
| 11260 | B/Mach Classic port, 3 cf package 5 | CALL |
| 11261 | B/Mach Classic port, 3 cf 1" w/MPV | CALL |
| 11262 | B/Mach Classic port, 3 cf 1-1/4" w/MPV | CALL |
| 11263 | B/Mach Classic port, 6 cf 1" w/MPV | CALL |
| 11264 | B/Mach Classic port, 6 cf 1-1/4" w/MPV | CALL |
| 11265 | B/Mach Classic port, 3 cf TLR100 w/MPV | CALL |
| 11266 | B/Mach Classic port, 3 cf TLR300 w/MPV | CALL |
| 11267 | B/Mach Classic port, 6 cf TLR100 w/MPV | CALL |
| 11268 | B/Mach Classic port, 6 cf TLR300 w/MPV | CALL |
| 11302 | Knob, CPF regulator | $11.00 |
| 11303 | Hose, supa blast | See 23100 |
| 11345 | Regulator, 1/2" pilot-operated | $124.00 |
| 11346 | Light asmbly, w/reg & gauge, BNP55 | $590.00 |
| 11350 | Bushing, 1/2" x 1/8" npt | $4.00 |
| 11351 | Fitting, 1/2" pipe x 1/2" flare | $5.00 |
| 11362 | Lamp, fluorescent, 13w INEX | $14.00 |
| 11363 | Adaptor, fluorescent lamp base | $29.00 |
| 11389 | Screw, 8-32 x 3/8" self tap hx hd | $0.50 |
| 11392 | Hose, supa 3/4" ID | See 23100 |
| 11395 | Cplg, CQPS-3/4 (nyl), for 1-5/16" OD supa | $18.00 |
| 11398 | Holder, NHP-3/4 (nyl), for 1-5/16" OD supa | $14.00 |
| 11411 | CCB tool w/nozzle-holder-brushes | $1,418.00 |
| 11412 | CCB pkg w/50 ft suction hose | $1,848.00 |
| 11413 | CCB pkg w/25 ft suction hose | $1,638.00 |
| 11414 | CCB pkg w/50 ft suction/blast hose | CALL |
| 11415 | CCB pkg w/25 ft suction/blast hose | $1,796.00 |
| 11416 | ELS-CCB-1 sys, 50ft hoses | CALL |
| 11418 | ELS-CCB-BM-1 sys, 50ft hoses | CALL |
| 11424 | CCB carrying sling | $16.00 |
| 11432 | CCB boot, long straight | $24.00 |
| 11433 | CCB boot, long inside corner | $24.00 |
| 11434 | CCB boot, long outside corner | $24.00 |
| 11500 | Dust bag, 12" x 28" (each) | $51.00 |
| 11501 | Dust bag, 16-1/2" x 48" (300cfm) | $55.00 |
| 11502 | Dust bag, 16-1/2" x 72" (6/900cfm) | $80.00 |
| 11503 | Dust bag, 3-1/2" x 64" long | $21.00 |
| 11506 | Dust bag, 3" x 20" | $16.00 |
| 11516 | Bearing, satellite 3/4" bore | $92.00 |
| 11517 | Bearing, table 1-1/2" bore | $559.00 |
| 11519 | Bearing, flange 160 series | $206.00 |
| 11521 | Bearing, DCM 161 | $78.00 |
| 11522 | Bearing, flange 1" bore | $181.00 |
| 11527 | Bearing, flange 1-1/2" bore | $261.00 |
| 11528 | Bearing, flange 2" bore | $227.00 |
| 11532 | Metering valve body, Pulsar/BNP | $36.00 |
| 11533 | Gun body, Comet | $86.00 |
| 11534 | Metering valve body, 164/166 | $30.00 |
| 11535 | Pump body, rubber, BNP250 | See 20579 |
| 11550 | Bracket, BNP style 1 foot pedal | $23.00 |
| 11552 | Bracket, mounting sep/reg, INEX | $11.00 |
| 11553 | Light ballast, fluorescent tube | $26.00 |
| 11556 | Bushing, const speed sprocket 162/4/6 | $51.00 |
| 11560 | Bushing, satellite idler | $256.00 |
| 11561 | Light fixture bottom plate | $36.00 |
| 11562 | Light hood bottom BNP | $36.00 |
| 11564 | Belting, heavy duty, A-300 | $28.00 |
| 11566 | Satellite base, rbr-ctd, A-250 | $338.00 |
| 11567 | Base, fixture A-200 series | $52.00 |
| 11568 | Base, satellite, A-200 new style | $130.00 |
| 11569 | Brush, flat, Comet | $26.00 |
| 11570 | Brush, inside, Comet | $31.00 |
| 11571 | Brush, outside, Comet | $31.00 |
| 11574 | Nut, nozzle holding (coated), option for BNP gun | $41.00 |
| 11576 | Clamp, 8-1/2" OD | $9.00 |
| 11577 | Clamp, 4" OD | $6.00 |
| 11578 | Clamp, 5" OD | $7.00 |
| 11579 | Clamp, toggle | $44.00 |
| 11580 | Clamp, 160 series door | $51.00 |
| 11584 | Connector, 1/2" twist-lok | Disc |
| 11586 | Light cover, incandescent | $97.00 |
| 11587 | Switch cover, exher control | $15.00 |
| 11594 | Wheel, 4" v-groove work car | $111.00 |
| 11601 | Light asmbly, w/o reg & gauge, BNP 55 | $443.00 |
| 11620 | Connector, 1" water-tite | $27.00 |
| 11627 | Connector, 1/2" x 90 | $19.00 |
| 11632 | Connector, 1" straight compress | $28.00 |
| 11637 | Connector, 3/4" sealtite straight | $15.00 |
| 11645 | Speed control, variable | $893.00 |
| 11648 | Dust coll door cylinder | $462.00 |
| 11649 | Cylinder, vertical lift door A-200 | $300.00 |
| 11669 | Cord, w/plug, electric | $29.00 |
| 11677 | Damper, 300 cfm 5" exh outlet | $118.00 |
| 11680 | Liner, BNP164 door | $149.00 |
| 11681 | Liner, BNP162 door | $128.00 |
| 11682 | Liner, BNP166 door | $212.00 |
| 11685 | Fitting, 3/8" OD elbow male | $11.00 |
| 11687 | Filter 7.5" x 7.5" x 2" | $12.00 |
| 11690 | Filter/regulator, DCM161 | $152.00 |
| 11712 | Fitting, 3/8" male pipe | $5.00 |
| 11713 | Fitting, 3/8" push-lok | $9.00 |
| 11714 | Fitting, 3/8" swivel & barb | $11.00 |
| 11719 | Fitting, 1" swivel & barb | $20.00 |
| 11720 | Fitting, 1" m-npt / 1" m-flare | $11.00 |
| 11721 | Fitting, 1" barb stem | $12.00 |
| 11722 | Fitting, 1/2" male brass push-lok | $11.00 |
| 11723 | Fitting, 1/2" swivel & barb | $7.00 |
| 11726 | Fitting, 3/8" x 1/2" push-lok | $5.00 |
| 11727 | Fitting, 1/4" pipe x 1/4" hose | Disc |
| 11731 | Fitting, 10-32 x 1/8" pipe | $4.00 |
| 11732 | Fitting, straight, 1/8" pipe x 1/8" hose | $4.00 |
| 11733 | Fitting, elbow, 1/8" male pipe | $7.00 |
| 11734 | Fitting (brass), tee all ends | $5.00 |
| 11736 | Fitting, 3/8" OD x 1/4" npt | $11.00 |
| 11737 | Fitting, 1/4" OD x 1/4" | $6.00 |
| 11738 | Fitting, 1/4" OD x 1/4" npt elbow | $9.00 |
| 11744 | Gasket, tumble basket | $19.00 |
| 11745 | Gasket, 3-6-900 reclaimer door | $10.00 |
| 11746 | Gasket, 300 reclaimer inlet | $5.00 |
| 11747 | Gasket, 600 reclaimer inlet 4" | $9.00 |
| 11749 | Gasket, Comet front filter | $5.00 |
| 11751 | Gasket, dust coll pan | $7.00 |
| 11754 | Gasket, Comet air inj | $11.00 |
| 11755 | Gasket, reclaimer, Comet | $29.00 |
| 11756 | Gasket, Comet screen | $29.00 |
| 11759 | Gasket, 900 reclaimer inlet 6" | $8.00 |
| 11760 | Gasket, Comet door | $21.00 |
| 11762 | Gasket, 600 DF inlet plate | $10.00 |
| 11763 | Gasket, 900 DF inlet plate | $10.00 |
| 11765 | Gasket, 1800 reclaimer inlet | $30.00 |
| 11766 | Gasket, door 1200/1800 recl | $13.00 |
| 11767 | Gasket, inlet adaptor 1200 | $16.00 |
| 11768 | Gasket, 2500 reclaimer inlet | $38.00 |
| 11771 | Gasket, 3-6-900 drawer door | $10.00 |
| 11776 | Gasket, sump pipe 4" | $5.00 |
| 11777 | Gasket, sump pipe 5" | $6.00 |
| 11778 | Gasket, sump pipe 6" | $7.00 |
| 11779 | Gasket, 600 reclaimer inlet 5" | $6.00 |
| 11780 | Gasket, sump 220 w/600 recl | $9.00 |
| 11781 | Gasket, Comet motor adaptor | $16.00 |
| 11782 | Gasket, DCM 161 back gun plate | $16.00 |
| 11798 | Grommet, hose inlet | $5.00 |
| 11801 | Grommet, 2" x 1-5/16" | $3.00 |
| 11802 | Gun body, BNP | $30.00 |
| 11803 | Gun asmbly, econ 30 series | $26.00 |
| 11804 | Gun, Comet | $128.00 |
| 11806 | Grating, BNP 50/2642 | $311.00 |
| 11807 | Grating, BNP 30/1740 | $223.00 |
| 11808 | Grating, BNP 40 | $317.00 |
| 11809 | Grating, BNP 210/3250 | $470.00 |
| 11810 | Grating, Pulsar VI/220/4050 | $504.00 |
| 11811 | Grating, Pulsar III/65/3636 | $357.00 |
| 11812 | Grating, DCM 175 | $118.00 |
| 11813 | Grating, BNP 55 | $294.00 |
| 11823 | Grating, BNP 250 | $693.00 |
| 11824 | Grating, BNP 600/6060 slotted | $441.00 |
| 11825 | Grating, BNP 600/6060 unslotted | $452.00 |
| 11826 | Gauge, pressure | See 11830 |
| 11829 | Gauge, pr 0-160, 1 1/2 face, 1/8 ctr bk mt | $40.00 |
| 11830 | Gauge, pr 0-160 w/bushing, 2" face, 1/8 ctr bk mt | $33.00 |
| 11831 | Gauge, pr 0-100 pilot reg, 1 1/2 face, panel mt | $38.00 |
| 11832 | Guard, incandescent light | $155.00 |
| 11843 | Light holder w/mounting screw | $2.00 |
| 11844 | Holder, auto-gun nozzle | $61.00 |
| 11847 | Transflow tube, per foot | $5.00 |
| 11857 | Basket insert, BNP162 | $193.00 |
| 11858 | Basket insert, perf BNP162 | $92.00 |
| 11859 | Basket insert, perf BNP164 | $166.00 |
| 11860 | Basket insert, BNP164 | $198.00 |
| 11861 | Basket insert, BNP166 | $279.00 |
| 11862 | Basket insert, perf BNP166 | $233.00 |
| 11872 | Light tube, fluorescent 15 watt | $11.00 |
| 11873 | Door latch asmbly pre-1992 | $64.00 |
| 11874 | Latch, left door BNP 30 | $11.00 |
| 11875 | Latch, 160 series door | $59.00 |
| 11876 | Latch, spring w/strike | $16.00 |
| 11892 | Gun mount (auto), 3-way adjust | $148.00 |
| 11895 | Muffler, flow control for 12203 | $16.00 |
| 11899 | Amp meter | $175.00 |
| 11900 | Motor, 1/4 hp dc, satellite(A300) | $638.00 |
| 11903 | Motor, 3/4 hp dc, 1800 rpm | $905.00 |
| 11905 | Motor, 2 rpm, DCM 161 | $279.00 |
| 11906 | Motor, Comet 220/1/50 | $748.00 |
| 11907 | Motor, 7-1/2 hp, 1725 rpm | Disc |
| 11909 | Motor, 3/4 hp, 1140 rpm, 3 ph | $559.00 |
| 11911 | Nipple, 1/4" x 1-1/2", galv | $4.00 |
| 11912 | Nipple, 1/4" x 1" toe | See 11911 |
| 11913 | Lock nut, 5/8" orifice | $4.00 |
| 11914 | Holding nut 23/32" ID, reg noz | $7.00 |
| 11916 | Holding nut 7/8" ID, W/S nozzle | $8.00 |
| 11917 | Lock nut, 1" | $4.00 |
| 11918 | Lock nut, 3/4-16 nf orifice | $8.00 |
| 11919 | Nozzle, #2 stainless | Disc |
| 11921 | Nozzle, extension (hrdnd), 5/16" x 3" | $96.00 |
| 11922 | Nozzle, extension (hrdnd), 3/8" x 3" | $96.00 |
| 11923 | Nozzle, extension (hrdnd), 7/16" x 3" | $96.00 |
| 11924 | Nozzle, extension (hrdnd), 5/16" x 9" | $223.00 |
| 11925 | Nozzle, extension (hrdnd), 3/8" x 9" | $223.00 |
| 11926 | Nozzle, extension (hrdnd), 7/16" x 9" | $223.00 |
| 11927 | Nozzle, extension (hrdnd), 5/16" x 6" | $149.00 |
| 11928 | Nozzle, extension (hrdnd), 3/8" x 6" | $149.00 |
| 11929 | Nozzle, extension (hrdnd), 7/16" x 6" | $149.00 |
| 11930 | Nozzle, #5 ceramic | $7.00 |
| 11931 | Nozzle, #6 ceramic | $10.00 |
| 11932 | Nozzle, #7 ceramic | $14.00 |
| 11933 | Needle for manometer, 1-1/2" | $4.00 |
| 11934 | Nozzle, #6 boron wide spray | $185.00 |
| 11935 | Nozzle, #5 boron carbide | $97.00 |
| 11936 | Nozzle, #6 boron carbide | $103.00 |
| 11937 | Nozzle, #7 boron carbide | $128.00 |
| 11939 | Nozzle, #5 side angle extn, 9" | $359.00 |
| 11940 | Nozzle, #5 side angle extn, 6" | $338.00 |
| 11941 | Nozzle, Mini-pot Saphicon | Disc |
| 11942 | Nozzle, #8 tungsten carbide | $57.00 |
| 11943 | Nozzle, #5 side angle extn, 4" | $323.00 |
| 11944 | Nozzle, #8 boron wide spray | $216.00 |
| 11947 | Nozzle, #6 tungsten wide spray | $65.00 |
| 11948 | Orifice, #4 (economy gun) | $30.00 |
| 11949 | Orifice, #5 (economy gun) | $34.00 |
| 11951 | Orifice, #4 (old style) | $33.00 |
| 11952 | Orifice, #5 (auto gun/160 series) | $33.00 |
| 11953 | Orifice, #6 | $33.00 |
| 11956 | Orifice, #7 (old style) | $33.00 |
| 11957 | Orifice, #8 (old style) | Disc |
| 11959 | Orifice, #4 (new auto gun) | $26.00 |
| 11960 | Orifice, #5 (new auto gun) | $26.00 |
| 11961 | Orifice, #6 (new auto gun) | $26.00 |
| 11962 | Orifice, #7 (new auto gun) | $26.00 |
| 11963 | Orifice, #8 (new auto gun) | $26.00 |
| 11965 | Panel, BNP air regulator | Disc |
| 11979 | Wear plate | See 23028 |
| 11980 | Wear plate | See 19223 |
| 12001 | Motor mount plate, 100 cfm | $47.00 |
| 12002 | Motor mount, 1200/1800 cfm 7.5 hp | $265.00 |
| 12003 | Motor mount plate, 300 cfm | $49.00 |
| 12004 | Motor mount plate, 600 cfm | $55.00 |
| 12005 | Motor mount plate, 900 cfm | $101.00 |
| 12011 | Plug (nyl), 1" pipe sq head | $5.00 |
| 12012 | Cap, metering valve (rubber) | $5.00 |
| 12021 | Sheave, single groove, A-250 | $82.00 |
| 12024 | Reducer, 1" - 3/8", galv | $9.00 |
| 12026 | Reducer, speed for 160 series | $1,178.00 |
| 12027 | Gear reducer, 50:1, A-250 | $685.00 |
| 12033 | O-ring, foot pedal | $4.00 |
| 12034 | Washer, foot pedal | $2.00 |
| 12037 | Ring, metering, A-250 auto kit | $2.00 |
| 12038 | Retaining ring, W/S nozzle | $12.00 |
| 12039 | Retaining ring, Comet brush | $11.00 |
| 12040 | Snap ring, side angle nozzle | $1.00 |
| 12046 | Relay, 160 series/FlatTrak | $35.00 |
| 12047 | Relay, 24v for BNP 300 | $61.00 |
| 12049 | Regulator, pressure, Comet | $153.00 |
| 12050 | Regulator, 1/4" mini w/gauge | $59.00 |
| 12051 | Regulator, 1-1/2" pilot-operated | $380.00 |
| 12052 | Regulator, 1" pilot-operated NR | $254.00 |
| 12053 | Regulator, 3/8" knob type | $59.00 |
| 12057 | Regulator, 3/8" pilot-operated | $128.00 |
| 12067 | Screw, 1/4" x 1/2" socket | $1.00 |
| 12073 | Bearing, shaft, A-250 | $128.00 |
| 12074 | Tumble basket shaft | $61.00 |
| 12075 | Wheel shaft, BNP162 | $359.00 |
| 12076 | Wheel shaft, BNP164 | $374.00 |
| 12077 | Wheel shaft, BNP166 | $397.00 |
| 12097 | Orifice sleeve | $5.00 |
| 12098 | Spacer, aluminum, A-250 | $11.00 |
| 12100 | Strike stop, nose | Disc |
| 12101 | Sprocket-15 tooth, 160 series | $67.00 |
| 12102 | Sprocket-60 tooth, 160 series | $181.00 |
| 12115 | Foot switch, A-250, special | $124.00 |
| 12116 | Switch, Comet (SW5) | $118.00 |
| 12117 | Switch, limit, micro, elec door lock | $107.00 |
| 12119 | Push button switch | $59.00 |
| 12120 | Micro limit switch, 160 series | $59.00 |
| 12121 | Switch, blower start, 160 series | $359.00 |
| 12127 | Switch, light asmbly | $13.00 |
| 12136 | Switch | $529.00 |
| 12139 | Tie, nylon, 3-7/8" long | $0.60 |
| 12140 | Tie, nylon, 14-1/2" long x 3/16" | $1.00 |
| 12144 | Screen, filter, BNP 250 | $34.00 |
| 12148 | Metering valve stem (old) | $14.00 |
| 12156 | Starter, fluorescent light | $7.00 |
| 12163 | Starter holder, fluorescent light | $7.00 |
| 12164 | Socket, 8-pin | $16.00 |
| 12166 | Splice pin & hook | $25.00 |
| 12173 | Tip, side angle nozzle .370 orif | $107.00 |
| 12175 | Tube insert, Comet | $44.00 |
| 12176 | Tool, window filler strip installation | $54.00 |
| 12178 | Timer, 60-minute | $756.00 |
| 12179 | Timer, 60-minute | $162.00 |
| 12180 | Timer, 60-minute, DCM161 | $85.00 |
| 12185 | Timer, bag shaker | $239.00 |
| 12187 | Valve, 1" swing check | $124.00 |
| 12188 | Valve, 2-way,Comet | $244.00 |
| 12189 | Valve, 1" ball with handle | See 02396 |
| 12190 | Valve, foot pedal, 3/8" style 1 | $282.00 |
| 12191 | Valve, Comet, 115v | $239.00 |
| 12193 | Valve, Tube-o-matic, 1/4" | $394.00 |
| 12194 | Valve, biasing-relay | $521.00 |
| 12195 | Valve, 3/8" swing check | $88.00 |
| 12196 | Valve, Tube-o-matic, 1" | $510.00 |
| 12197 | Valve, 1/4" 4-way MAC | $185.00 |
| 12198 | Valve, pressure relief 3/8" | $55.00 |
| 12199 | Valve, 1/4" 3-way MAC | $146.00 |
| 12200 | Valve, 1" mini, air inj | $628.00 |
| 12201 | Valve, 3/8" ball | $33.00 |
| 12202 | Valve, 3-way door limit | $33.00 |
| 12203 | Valve, 4-way air | $107.00 |
| 12205 | Vibrator, Comet | $208.00 |
| 12212 | Window glass, 12-1/2" x 19-1/2" | $42.00 |
| 12213 | Window glass, 20" x 30" | $145.00 |
| 12214 | Wheel, 6" x 1-1/2", Comet | $31.00 |
| 12215 | Wheel, Comet, 6" | $62.00 |
| 12217 | Wheel, 160 parts drum drive | $149.00 |
| 12219 | Pulley, elevator wheel, 10" x 4" | Disc |
| 12220 | Wheel, 6" v-groove, work car | $72.00 |
| 12223 | Recl outlet plate | See 18475 |
| 12224 | Recl outlet plate, 900 cfm | $103.00 |
| 12226 | Tumble basket rplcmnt, 2-gal | $441.00 |
| 12227 | Tumble basket asmbly, 2-gal field inst | CALL |
| 12228 | Basket asmbly, BNP164 | $2,016.00 |
| 12229 | Basket asmbly, BNP166 | CALL |
| 12230 | Basket asmbly, 3/16", DCM161 | $236.00 |
| 12246 | Door asmbly, BNP162 | $443.00 |
| 12247 | Door asmbly, BNP164 | $575.00 |
| 12248 | Door asmbly, BNP166 | $643.00 |
| 12249 | Door, full-hinge, left, 50 | $407.00 |
| 12263 | Recl latch/hook asmbly | $15.00 |
| 12264 | Housing, auto gun left mount | $114.00 |
| 12265 | Housing, auto gun center mount | $114.00 |
| 12266 | Housing, auto gun right mount | $114.00 |
| 12267 | Housing, tumble basket gun | $99.00 |
| 12269 | Housing, 100 cfm exher | $374.00 |
| 12270 | Housing, 1200/1800 cfm exher | $945.00 |
| 12271 | Housing, 900 cfm exher | $651.00 |
| 12272 | Housing, 600 cfm exher | $567.00 |
| 12273 | Housing, 300 cfm exher | $483.00 |
| 12274 | Housing, 2500 cfm exher | $1,418.00 |
| 12275 | Housing(new), auto gun left mnt | $101.00 |
| 12276 | Housing(new), auto gun ctr mnt | $101.00 |
| 12277 | Housing(new), auto gun rt mnt | $101.00 |
| 12278 | Holder asmbly, economy gun | $130.00 |
| 12279 | Screen, 5" OD w/clip 300 cfm recl | $61.00 |
| 12280 | Screen, 5" OD w/clip, 600 cfm recl | $65.00 |
| 12281 | Screen, recl, 5" OD w/clip 900 cfm | $82.00 |
| 12282 | Screen, recl 8" OD w/clip, #8 mesh | $67.00 |
| 12295 | Guard, wide spray nozzle | $64.00 |
| 12300 | Vacuum head, Comet & S/Comet (incl 12175) | $218.00 |
| 12301 | Gun asmbly, #4 BNP | $61.00 |
| 12302 | Gun asmbly, #5 BNP | $61.00 |
| 12303 | Gun asmbly, #6 BNP | $61.00 |
| 12304 | Gun asmbly, #7 BNP | $61.00 |
| 12305 | Gun asmbly, #8 BNP | $61.00 |
| 12308 | Motor, 1/2 hp, 3450 rpm, 1 ph | $353.00 |
| 12309 | Motor, 2 hp, 3450 rpm, 3 ph | $632.00 |
| 12310 | Motor, 1 hp, 3450 rpm, 3 ph | $527.00 |
| 12311 | Motor, 1/2 hp, for BNP162 | $470.00 |
| 12314 | Motor, 1 hp, 3450 rpm, 1 ph | $445.00 |
| 12315 | Motor, Comet | $538.00 |
| 12316 | Motor, 1/3 hp, 115/230v, BNP250 | $580.00 |
| 12318 | Gun mount (BNP), adjustable | $111.00 |
| 12319 | Light asmbly, w/o regulator | $374.00 |
| 12321 | Manifold, media (sputnik), 10 gun | $538.00 |
| 12322 | Manifold, media (sputnik), 6 gun | $475.00 |
| 12332 | Paddle wheel, 2500/3600 cfm 15 hp | $664.00 |
| 12333 | Paddle wheel, 300 cfm | $151.00 |
| 12334 | Paddle wheel, 600 cfm | $170.00 |
| 12335 | Paddle wheel, 900 cfm | $231.00 |
| 12336 | Paddle wheel, 1200/1800 cfm 7.5 hp | $573.00 |
| 12337 | Paddle wheel, 2500 cfm | $672.00 |
| 12339 | Paddle wheel, 100 cfm | $195.00 |
| 12342 | Orifice asmbly, #4 | $31.00 |
| 12343 | Orifice asmbly, #5 | $31.00 |
| 12344 | Orifice asmbly, #6 | $31.00 |
| 12345 | Orifice asmbly, #7 | $31.00 |
| 12346 | Orifice asmbly, #8 | $31.00 |
| 12347 | Orifice asmbly, #2 | Disc |
| 12348 | Orifice asmbly, #3 | $31.00 |
| 12351 | Plate asmbly | $70.00 |
| 12353 | Inlet plate asmbly, 900 DF | $118.00 |
| 12354 | Inlet plate asmbly,1800 recl | $139.00 |
| 12361 | Inlet plate asmbly, 600 recl - 5" | $67.00 |
| 12362 | Inlet plate asmbly | See 12354 |
| 12363 | Inlet plate asmbly, 900 recl - 6" | $71.00 |
| 12364 | Inlet plate asmbly, 600 recl - 4" | $66.00 |
| 12365 | Inlet plate asmbly, 300 recl - 4" | $65.00 |
| 12368 | Foot pedal asmbly, style 1 | $319.00 |
| 12373 | Nozzle, extension (SA), 9" w/tip & ring | $441.00 |
| 12374 | Nozzle, extension (SA), 6" w/tip & ring | $441.00 |
| 12376 | Sump pipe asmbly, 4", 55/65-300 | $65.00 |
| 12377 | Sump pipe asmbly, 5", 55/65-600 | $76.00 |
| 12378 | Sump pipe asmbly, 6" 4050/900 | $80.00 |
| 12379 | Sump pipe asmbly, 600/720 (6x4x4) | $361.00 |
| 12383 | Switch asmbly, blower control | $244.00 |
| 12384 | Switch asmbly, Comet | $124.00 |
| 12388 | Screen asmbly, Comet | $118.00 |
| 12390 | Recl asmbly, Comet | $657.00 |
| 12398 | Recl, suct, 900 cfm w/2 hp exh 230v | CALL |
| 12399 | Recl, suct, 900 cfm w/o exh | CALL |
| 12400 | Recl, suct, 600 cfm w/1 hp exh 115v | CALL |
| 12401 | Recl, suct, 600 cfm w/o exh | CALL |
| 12402 | Recl, suct, 300 cfm w/1/2 hp exh 115v | CALL |
| 12403 | Recl, suct, 300 cfm w/o exh | $1,166.00 |
| 12409 | Tube asmbly, Comet | $595.00 |
| 12411 | Turntable, 20" dia 500lb capacity | $1,134.00 |
| 12412 | Turntable, 20" dia 25lb capacity | $504.00 |
| 12414 | Shaker asmbly, 600 cfm | $57.00 |
| 12415 | Shaker asmbly, 900 cfm | $76.00 |
| 12417 | Valve, abr mtrg, BNP | $49.00 |
| 12418 | Valve asmbly, flapper, Comet | $24.00 |
| 12419 | Valve, abr mtrg, Comet | $116.00 |
| 12420 | Metering valve asmbly, Lexan | $54.00 |
| 12423 | Wheel, 4" vert/horiz oscillator | $275.00 |
| 12430 | Chain, roller, #40, per foot | $16.00 |
| 12433 | Belting, 1/2" red urethane, per ft | $9.00 |
| 12435 | Gasket, self seal per foot | $4.00 |
| 12436 | Filler strip, window gasket, per foot | $2.00 |
| 12438 | Gasket, 5/16" fawn x 42" x 72" | $70.00 |
| 12446 | Hose, air 3/8" push-lok per foot | Disc |
| 12447 | Hose, 4" ID unlined flex per foot | $17.00 |
| 12448 | Hose, 7" ID unlined flex per foot | $21.00 |
| 12449 | Hose, 5" ID unlined flex per foot | $20.00 |
| 12450 | Hose, vacuum, 1-1/2" ID x 20ft | $384.00 |
| 12451 | Hose, 3/8" ID media per foot | Disc |
| 12452 | Hose, 6" ID unlined flex per foot | $21.00 |
| 12457 | Hose, 6" ID heavy lined x 15 ft | $1,270.00 |
| 12458 | Hose, air 1/2" per foot | $6.00 |
| 12459 | Hose, 7" ID heavy lined x 15 ft | $1,315.00 |
| 12460 | Hose, 12" ID flex per foot | $38.00 |
| 12461 | Hose, 8" ID heavy lined x 15 ft | $1,565.00 |
| 12463 | Hose, 10" ID heavy lined x 15 ft | $1,638.00 |
| 12465 | Hose, 5" ID heavy lined x 15 ft | $1,197.00 |
| 12466 | Hose, 4" ID light lined per foot | $22.00 |
| 12467 | Hose, 5" ID light lined per foot | $23.00 |
| 12468 | Hose, 6" ID light lined per foot | $26.00 |
| 12469 | Hose, 7" ID light lined per foot | $28.00 |
| 12470 | Hose, 8" ID light lined per foot | $31.00 |
| 12471 | Hose, media, 1/2" ID per foot | $11.00 |
| 12472 | Hose, air 1/2" push-lok per foot | $4.00 |
| 12473 | Hose, 4" ID heavy lined x 15 ft | $1,197.00 |
| 12475 | Hose, 1/8" ID urethane per foot | $2.00 |
| 12476 | Hose, media 1/2" ID clear urethane per ft | $7.00 |
| 12478 | Tubing, 3/8" OD poly per foot | $2.00 |
| 12480 | Tubing, 1/4" OD poly per foot | $1.00 |
| 12481 | Filter material per square foot | $5.00 |
| 12484 | Foam, sound per square foot | $12.00 |
| 12517 | Conv kit, 900 cfm pressure reclaim | CALL |
| 12518 | Conv kit, 600 cfm pressure reclaim | CALL |
| 12521 | Paint, coppertone - pint | Disc |
| 12523 | Table/track, BNP 600/720 48"/500lb | CALL |
| 12524 | Table/track, BNP 600 30"/500lb | CALL |
| 12526 | Diaphr, urethane, 1" valve | $107.00 |
| 12527 | Diaphr, gum rubber, 1" valve | $338.00 |
| 12528 | Manometer kit | $155.00 |
| 12529 | Service kit, foot pedal 12369 | $10.00 |
| 12531 | Alox kit 720S 900 cfm, fac inst | CALL |
| 12534 | Alox kit 600S 900 cfm, fac inst | CALL |
| 12535 | Service kit, reg 12053, 3/8" Nor | $51.00 |
| 12542 | Comet suction blaster, electric 115v/1/60 | CALL |
| 12546 | Super Comet pressure blaster | CALL |
| 12547 | Comet suction blaster, electric 220v/1/50 | CALL |
| 12548 | Cab DCM 161 mini-tumble blaster | CALL |
| 12571 | Cab BNP Double 65 900 DF, 230/3/60 | CALL |
| 12612 | Cab BNP Double 65P 900 DF, 230/3/60 | CALL |
| 12615 | Cab BNP Double 65P 900 RPC, 230/3/60 | CALL |
| 12652 | Cab BNP 720S 900 DF, 230/3/60 | CALL |
| 12653 | Cab BNP 720S 900 RPC, 230/3/60 | CALL |
| 12655 | Cab BNP 720P 900 DF, 230/3/60 | CALL |
| 12656 | Cab BNP 720P 900 RPC, 230/3/60 | CALL |
| 12658 | Cab BNP 720S 900 DF, 460/3/60 | CALL |
| 12659 | Cab BNP 720S 900 RPC, 460/3/60 | CALL |
| 12661 | Cab BNP 720P 900 DF, 460/3/60 | CALL |
| 12662 | Cab BNP 720P 900 RPC, 460/3/60 | CALL |
| 12667 | Cab BNP 600S 900 DF, 230/3/60 | CALL |
| 12668 | Cab BNP 600S 900 RPC, 230/3/60 | CALL |
| 12670 | Cab BNP 600P 900 DF, 230/3/60 | CALL |
| 12671 | Cab BNP 600P 900 RPC, 230/3/60 | CALL |
| 12673 | Cab BNP 600S 900 DF, 460/3/60 | CALL |
| 12674 | Cab BNP 600S 900 RPC, 460/3/60 | CALL |
| 12676 | Cab BNP 600P 900 DF, 460/3/60 | CALL |
| 12677 | Cab BNP 600P 900 RPC, 460/3/60 | CALL |
| 12685 | Satellite asmbly | $418.00 |
| 12699 | Filter, dry, 300 cfm | CALL |
| 12700 | Filter, dry, 600 cfm | CALL |
| 12701 | Filter, dry, 900 cfm | CALL |
| 12707 | Elbow, 3/8" galv street | $11.00 |
| 12708 | Elbow, 1/4" galv | $5.00 |
| 12710 | Glove, rubber left | $29.00 |
| 12711 | Glove, rubber right | $29.00 |
| 12715 | Regulator, 1/8" mini-pilot | $34.00 |
| 12716 | Handle, INEX trouble light | $27.00 |
| 12722 | Screw, self-drilling, 10-16 x 3/4" | $0.60 |
| 12743 | Valve body, Comet metering valve | $58.00 |
| 12746 | Bushing, 1/2" x 3/8" pipe | $5.00 |
| 12747 | Nipple, 3/8" x 1", galv | $3.00 |
| 12748 | Bushing, 3/4" x 3/8" pipe | $8.00 |
| 12749 | Washer, 1" OD rubber - duplicate # | See 04396 |
| 12750 | Clamp, Comet hose | $5.00 |
| 12756 | Clamp, 3/4" OD | $4.00 |
| 12760 | Nut, 10-24 hex | $0.60 |
| 12761 | Motor, 7.5hp, 3450 rpm | CALL |
| 12762 | Grommet, 1/4" ID x 1/2" OD | $0.80 |
| 12763 | Regulator asmbly, 1/2" (cab) | $286.00 |
| 12766 | Bracket, recl mount BNP 65 | $67.00 |
| 12803 | Gun body, old style | $34.00 |
| 12806 | Gun mount, DCM161 | $17.00 |
| 12807 | Gun asmbly lock nut, DCM161 | $2.00 |
| 12811 | Gun mount back plate, DCM161 | $23.00 |
| 12812 | Motor mount bracket, DCM161 | $30.00 |
| 12818 | Bushing, 3/8" x 1/4" | $3.00 |
| 12819 | Tee, 3/8" pipe | $5.00 |
| 12830 | Liner, 900 cfm recl inlet | $46.00 |
| 12831 | Recl, suct, 1200 cfm w/o exh, n-mod | See 24059 |
| 12835 | Table/track, BNP220/VI/VI-P - 20" | CALL |
| 12841 | Conv kit, 600 cfm suction reclaim | CALL |
| 12842 | Conv kit, 300 cfm suction reclaim | CALL |
| 12847 | Bracket, recl mount BNP 55 | $65.00 |
| 12854 | Light fixture, incandescent | $139.00 |
| 12857 | Lubricator, dust coll | $85.00 |
| 12864 | Impeller rplcmnt seal kit | See 20579 |
| 12882 | Nozzle, #7 tungsten carbide | $58.00 |
| 12894 | Nozzle, #8 boron carbide | $103.00 |
| 12899 | Handle, bag shaker | $28.00 |
| 12906 | Nut, W/S nozzle holding (coated) | $41.00 |
| 12942 | Alox kit 220S-900 & Pulsar VI-S, fac inst | $714.00 |
| 12945 | Alox kit Double 65S 900, fac inst | $1,008.00 |
| 12951 | Cab BNP 250 wetblast for gl beads | CALL |
| 12952 | Tumble basket asmbly, 2-gal fac inst | CALL |
| 12953 | Alox kit 55S 300, field inst | $567.00 |
| 12954 | Alox kit 55S 300/600, fact inst | $546.00 |
| 12970 | Grating, BNP 720, unslotted | $256.00 |
| 12971 | Grating, BNP 720, slotted (3 req'd) | $277.00 |
| 12972 | Cover for track, 6060 | $36.00 |
| 12977 | Blower asmbly, 1800 cfm | CALL |
| 13010 | Basket asmbly, BNP162 | $1,880.00 |
| 13011 | Wear plate, 600 cfm, rbr-lined | $70.00 |
| 13050 | Exhauster asmbly, 300 cfm | $1,063.00 |
| 13051 | Blower asmbly, 600 cfm | CALL |
| 13053 | Blower asmbly, 900 cfm | $1,596.00 |
| 13062 | Gun chamber, BNP164 | $842.00 |
| 13089 | Gasket, 1/8" x 2", per foot | $2.00 |
| 13090 | Sprocket, 160 series | $85.00 |
| 13112 | Light holder - BNP 30, 40, INEX | $18.00 |
| 13116 | Nozzle, air blow-off | $37.00 |
| 13118 | Nozzle, #5 tungsten carbide | $43.00 |
| 13123 | Orifice, Comet (special) | $41.00 |
| 13131 | Screen, recl, w/o clip, #8 mesh | $61.00 |
| 13148 | Sheave, pulley, A300 auto kit | $79.00 |
| 13149 | Pulley, 1/2" OD, A300 auto kit | $59.00 |
| 13174 | Screen, exh, BNP 250 | $28.00 |
| 13179 | Window wash valve extn, BNP250 | $20.00 |
| 13236 | Coupling, 3" pipe | $61.00 |
| 13292 | Nipple, 3/8" x close, brass | $4.00 |
| 13310 | Alox kit 65S 300 / 600/ III, fac inst | $588.00 |
| 13311 | Conv kit, glove adaptor (pair) | $101.00 |
| 13373 | Motor, 3/4 hp, 1800 rpm, 3 ph | $584.00 |
| 13410 | Suppressor/silencer, RP, less adaptor | $1,071.00 |
| 13421 | Eyebolt, 5/8" | $26.00 |
| 13426 | Gasket, blast hose 600/720/6060 | $13.00 |
| 13474 | Alox kit 220P/Pulsar VI-P, fac inst | $714.00 |
| 13477 | Screw, 1/2" x 3-1/4" shoulder | $9.00 |
| 13479 | Protector, turntable bearing | $7.00 |
| 13525 | Switch, barrel jog 160 series | $103.00 |
| 13527 | Alox kit 65S 300, fac inst | See 13310 |
| 13530 | Table/track, BNP65/Pulsar III - 20" | CALL |
| 13536 | Alox kit 65P 600, fact inst | $588.00 |
| 13538 | Conv kit, 900 cfm suction reclaim | CALL |
| 13547 | Timer asmbly, 30 second | $307.00 |
| 13567 | Light asmbly, incan w/guard | $401.00 |
| 13576 | Bolt, J, Comet | $18.00 |
| 13596 | Gear reducer shaft | $615.00 |
| 13655 | Paint, coppertone - gallon | Disc |
| 13666 | Grommet, 1/16" ID x 1 3/8" | $4.00 |
| 13677 | Drive shaft asmbly, DCM161 | $82.00 |
| 13685 | Shaft, collar fixture | $254.00 |
| 13804 | Recl, suct, 600 cfm w/exh 230v | CALL |
| 13809 | Door, full-hinge, right, 210 | $454.00 |
| 13845 | Turntable, 48" dia 500lb capacity | CALL |
| 13849 | Cab BNP162-3 w/600 recl/DF std-elec | CALL |
| 13854 | U-bolt for 1-1/2" pipe | $4.00 |
| 13861 | Gun chamber, BNP162 | $636.00 |
| 13862 | Manifold, air - BNP162 | $250.00 |
| 13882 | Wear plate, 150 cfm | $28.00 |
| 13890 | Collar, replcmt gun Super Comet | $82.00 |
| 13899 | Table/track, BNP Double 65 - 20" | CALL |
| 13919 | Vortex inner cylinder, 900 cfm | $97.00 |
| 13924 | Alox kit 65S 600, field inst | $620.00 |
| 13945 | Timer, 30-minute | $267.00 |
| 13949 | Alox kit 220S-900, field inst | $798.00 |
| 14029 | Basket | See 12226 |
| 14036 | Cab BNP166-1 w/900 recl/DF std-elec | CALL |
| 14047 | Filter, INEX air inlet | $7.00 |
| 14055 | Wear plate, 900 cfm, rbr-lined | $99.00 |
| 14060 | Wear plate, 300 cfm, rbr-lined | $67.00 |
| 14099 | A-300 automation kit | CALL |
| 14127 | Alox kit 50S 300, field inst | $567.00 |
| 14128 | Alox kit 50S 600, field inst | $588.00 |
| 14129 | Alox kit 55S 600, field inst | $567.00 |
| 14130 | Alox kit Double 65S 900, field inst | $1,071.00 |
| 14131 | Alox kit 210S-300, field inst | $588.00 |
| 14132 | Alox kit 210S-600, field inst | $641.00 |
| 14133 | Alox kit Pulsar VI-S, field inst | $714.00 |
| 14138 | Turntable, 30" dia 500lb capacity | $1,386.00 |
| 14139 | Table/track, BNP720 30"/500lb | CALL |
| 14140 | Table/track, fac inst, BNP 600 30"/2000lb | CALL |
| 14141 | Table/track, BNP 600/720 48"/2000lb | CALL |
| 14146 | Alox kit Double 65P 900, fac inst | $882.00 |
| 14152 | Recl, suct, 1800 cfm w/o exh | CALL |
| 14153 | Recl, suct, 2500 cfm w/o exh | CALL |
| 14154 | Recl, suct, 2500 cfm w/10 hp exh | CALL |
| 14155 | Recl, suct, 1800 cfm w/7.5 hp exh | CALL |
| 14161 | Cab BNP162-1 w/300 recl/DF std-elec | CALL |
| 14167 | Cab BNP162-4 w/600 recl/RP std-elec | CALL |
| 14172 | Cab BNP164-1 w/600 recl/DF std-elec | CALL |
| 14178 | Cab BNP164-3 w/900 recl/DF std-elec | CALL |
| 14181 | Cab BNP164-4 w/600 recl/RP std-elec | CALL |
| 14183 | Cab BNP164-5 w/900 recl/RP std-elec | CALL |
| 14190 | Cab BNP166-2 w/900 recl/RP std-elec | CALL |
| 14204 | Recl, suct, 1200 cfm w/5 hp exh, n-mod | See 24058 |
| 14215 | Recovery sys, M-section®, 8ft w/900 DF | CALL |
| 14217 | Recovery sys, M-section®, 8ft w/RPH-2 | CALL |
| 14218 | Recovery sys, M-section®, 10ft w/900 DF | CALL |
| 14220 | Recovery sys, M-section®, 10ft w/RPH-2 | CALL |
| 14221 | Recovery sys, M-section®, 12ft w/900 DF | CALL |
| 14223 | Recovery sys, M-section®, 12ft w/RPH-2 | CALL |
| 14224 | Blast room, preassembled,14Lx7Wx8H | CALL |
| 14226 | A-250 automation kit | CALL |
| 14228 | Switch boot, rubber for toggle switch | $10.00 |
| 14241 | Alox kit 65S 300 & Pulsar III-S, field inst | $588.00 |
| 14242 | Curtain, front BNP 65/Pulsar III | $70.00 |
| 14243 | Curtain, back BNP 65/Pulsar III | $86.00 |
| 14244 | Curtain, door BNP 65/Pulsar III | $90.00 |
| 14245 | Curtain, door 220/Pulsar VI & VI-P | $118.00 |
| 14246 | Curtain, front 220/Pulsar VI & VI-P | $118.00 |
| 14247 | Curtain, back 220/Pulsar VI & VI-P | $139.00 |
| 14256 | Fitting, 3/8" swedgelock | Disc |
| 14269 | Recl, press, 900 cfm 24" w/2 hp exh | CALL |
| 14271 | Recl door w/latch & strike | $70.00 |
| 14272 | Inlet adaptor w/damper, 600 DF | $118.00 |
| 14273 | Inlet adaptor w/damper, 900 DF | $118.00 |
| 14274 | Dust drawer, 300 dust coll | $70.00 |
| 14275 | Dust drawer, 600 dust coll | $75.00 |
| 14276 | Dust drawer, 900 dust coll | $103.00 |
| 14277 | Inlet cover plate, 600 cfm DF | $20.00 |
| 14278 | Inlet cover plate, 900 cfm DF | $23.00 |
| 14279 | Recl outlet plate, wye 900 | $258.00 |
| 14280 | Handle rod, bag shaker | $24.00 |
| 14281 | Door, dust coll, w/hinges - 3,6,900 cfm | $328.00 |
| 14283 | Door, full-hinge, left, 220 | $748.00 |
| 14284 | Door, full-hinge, right, 220 | $760.00 |
| 14289 | Door, full-hinge, left, 210 | $538.00 |
| 14297 | Door, full-hinge, left, 55 | $748.00 |
| 14314 | Cam, A-200 aluminum table | $38.00 |
| 14318 | Curtain, back BNP 55 | $88.00 |
| 14319 | Curtain, front BNP 55 | $59.00 |
| 14320 | Curtain, door BNP 55 | $65.00 |
| 14324 | Door, full-hinge, right, 50 | $538.00 |
| 14325 | Door, full-hinge, left 65 | $538.00 |
| 14326 | Door, full-hinge, right, 65 | $538.00 |
| 14329 | Window wash pipe asmbly, BNP250 | $313.00 |
| 14332 | Door, full-hinge, right, 55 | $538.00 |
| 14334 | Curtain, front BNP 50 | $103.00 |
| 14335 | Curtain, back BNP 50 | $101.00 |
| 14336 | Door deflector | Disc |
| 14342 | Shaker asmbly, 300 cfm | $67.00 |
| 14347 | Paint, coppertone - aerosol can | Disc |
| 14356 | Door, full-hinge, left, 30 | $538.00 |
| 14379 | Cab BNP Double 65 900 RPC, 230/3/60 | CALL |
| 14380 | Cab BNP Double 65 900 RPH-2, 230/3/60 | CALL |
| 14394 | Cab BNP 600S 900 RPH, 230/3/60 | CALL |
| 14395 | Cab BNP 600P 900 RPH, 230/3/60 | CALL |
| 14396 | Cab BNP 720S 900 RPH, 230/3/60 | CALL |
| 14397 | Cab BNP 720P 900 RPH, 230/3/60 | CALL |
| 14411 | Inlet plate asmbly, 900 recl - 5" | $67.00 |
| 14417 | Parts tray, BNP164 | $214.00 |
| 14418 | Slide cover, 160 series | $23.00 |
| 14419 | Manifold, air - BNP164 | $359.00 |
| 14420 | Gun chamber, BNP166 | $748.00 |
| 14421 | Manifold, air - BNP166 | $397.00 |
| 14422 | Parts tray, BNP162 | $212.00 |
| 14423 | Parts tray, BNP166 | $265.00 |
| 14425 | Cab INEX 3048 w/Shop-Vac | CALL |
| 14436 | Door seal, 600/720 | $76.00 |
| 14438 | Cab BNP 600S 900 RPH, 460/3/60 | CALL |
| 14441 | Cab BNP 600S 1200 RPH, 230/3/60 | CALL |
| 14442 | Cab BNP 600S 1200 RPH, 460/3/60 | CALL |
| 14450 | Cab BNP 720S 900 RPH, 460/3/60 | CALL |
| 14453 | Cab BNP 720S 1200 RPH, 230/3/60 | CALL |
| 14454 | Cab BNP 720S 1200 RPH, 460/3/60 | CALL |
| 14464 | Cab BNP 600P 900 RPH, 460/3/60 | CALL |
| 14467 | Cab BNP 600P 1200 RPH, 230/3/60 | CALL |
| 14468 | Cab BNP 600P 1200 RPH, 460/3/60 | CALL |
| 14476 | Cab BNP 720P 900 RPH, 460/3/60 | CALL |
| 14479 | Cab BNP 720P 1200 RPH, 230/3/60 | CALL |
| 14480 | Cab BNP 720P 1200 RPH, 460/3/60 | CALL |
| 15002 | Hose end, 1/2" flare push-lok | $7.00 |
| 15012 | Cable, safety, 1/2" to 1-1/4" OD | $34.00 |
| 15013 | Cable, safety, 1-1/2" to 3" OD | $40.00 |
| 15027 | Pump, ambient air, AAP-1 | $1,260.00 |
| 15029 | Filter, inlet, AAP-1 & 2 | $35.00 |
| 15030 | Filter cartr, 2" OD x 2-5/8" | $44.00 |
| 15031 | Hose, remote kit, AAP-1 & 2, 50 ft | $365.00 |
| 15032 | Service kit, AAP-1 pump | Disc |
| 15033 | Pressure gauge, 0-30 psi, AAP-1 | Disc |
| 15034 | Service kit, AAP-2 pump | Disc |
| 15035 | Pressure gauge, 0-30 psi, AAP-2 | Disc |
| 15042 | Interlock detent sleeve | $7.00 |
| 15044 | Headset, mic boom | Disc |
| 15047 | Mic foam windscreen | Disc |
| 15048 | Antenna, whip, radio, UHF | Disc |
| 15049 | Battery pack, radio, 7.5 Ni-cad | $99.00 |
| 15051 | Belt clip, radio | $15.00 |
| 15052 | Battery charger, quick rate - 3 hour | $143.00 |
| 15054 | Headset, oper helmet w/boom mic | $487.00 |
| 15057 | Holster, radio, x-chest | $164.00 |
| 15058 | Headset, supervisor ear pad | Disc |
| 15059 | Headset, supervisor cover | Disc |
| 15060 | Headset, supervisor cup hanger | Disc |
| 15061 | Headset, supervisor head band | $11.00 |
| 15062 | Headset, supervisor boom wash-pr | $8.00 |
| 15063 | Headset, supervisor thumb screw | $17.00 |
| 15065 | Headset, mic element super & oper | $103.00 |
| 15066 | Headset, oper boom support asmbly | $99.00 |
| 15067 | Headset, speaker set - each | $124.00 |
| 15082 | Cab, Silverado SRS3636 | See 19950 |
| 15083 | Cab, Silverado SRS4050 | See 19958 |
| 15084 | Cab, Silverado SRN4050 | See 19964 |
| 15085 | Cab, Silverado PRS3636 | See 19972 |
| 15087 | Cab, Silverado PRN4050 | See 19971 |
| 15088 | Cab Aerolyte PRS 3636A RP | CALL |
| 15090 | Cab Aerolyte PRN 4050A RP | CALL |
| 15097 | Cover, blast mach, 45" x 54" poly | $14.00 |
| 15138 | Cord, ACS extn, 50 ft w/twist-lok | $275.00 |
| 15143 | Cover, blast mach, 45" x 68" poly | $19.00 |
| 15500 | CCB tool, less nozzle | $1,218.00 |
| 15502 | CCB vacuum housing | $185.00 |
| 15503 | CCB boot, short straight | $24.00 |
| 15504 | CCB nut ring, four piece | $43.00 |
| 15505 | CCB pivot ring | $72.00 |
| 15506 | CCB gimbal ring | $51.00 |
| 15507 | CCB boot clamp half | $72.00 |
| 15508 | CCB brush, long straight | $65.00 |
| 15509 | CCB brush, inside corner | $70.00 |
| 15510 | CCB brush, outside corner | $80.00 |
| 15511 | CCB brush, short straight | $59.00 |
| 15512 | CCB blast tube, 23" | $187.00 |
| 15513 | CCB handle clamp | $34.00 |
| 15514 | CCB straight handle | $30.00 |
| 15515 | CCB angled handle | $30.00 |
| 15516 | CCB retaining ring | $21.00 |
| 15518 | Elbow, connection, CCB | $86.00 |
| 15520 | CCB wheel ring | $139.00 |
| 15525 | Screw, thumb, 1/4" x 1", CCB | $2.00 |
| 15526 | Screw, socket hd, 1/4" x 1/2", CCB | $0.70 |
| 15527 | Nut, square, 1/4", CCB | $0.50 |
| 15528 | Screw, button hd, 10-24 x 5/8", CCB | $0.70 |
| 15532 | CCB handle grip, 5" | $7.00 |
| 15540 | CCB handle grip, 9-1/4" | $7.00 |
| 15663 | Indication panel, RP/DC | $391.00 |
| 15667 | Hose, 16" ID flex per foot | $44.00 |
| 15668 | RP dust drum, 30 gal | $198.00 |
| 15670 | RP dust drum adaptor, 30 gal | $114.00 |
| 15673 | Filter cartr, RP, 13" x 26" | $244.00 |
| 15674 | Venturi, 8.375" cartr, RP coll | $73.00 |
| 15703 | Fitting, 1/4" tube x 1/8" npt | $10.00 |
| 15781 | Filter cartr, RPC/RPH, 13" x 36" | $300.00 |
| 15786 | RP snubber fitting | $16.00 |
| 15787 | RP elbow, 1/4" tube-1/8" | $6.00 |
| 15804 | Dust coll, RPC-2 600 cfm, 1 hp, 115v | CALL |
| 15818 | Valve, pulse, 1-1/2", RP/CDF | $279.00 |
| 15819 | Connector, bulkhead RPC/RPH | $151.00 |
| 15890 | Ident kit, 2 outlet twinline hose | $11.00 |
| 15891 | Ident kit, 4 outlet twinline hose | $16.00 |
| 15892 | Tubing, 1/4" OD nylon per foot | $2.00 |
| 15931 | Valve, 3-way, 2-position, remote | $397.00 |
| 15939 | Dust coll, RPC-2 600 cfm, 1 hp, 230v | CALL |
| 16070 | Liner, 900 cfm recl sump | $338.00 |
| 16202 | Manifold, media (sputnik), 12-gun | $580.00 |
| 16213 | Plate, press down, RP | $59.00 |
| 16307 | Adaptor, RPH, 900 cfm inlet | $101.00 |
| 16362 | Adaptor, RPC, 600 cfm inlet | $76.00 |
| 16554 | Support, blast hose, 600P/720P | $30.00 |
| 16734 | Door seal back-up, 600/720 | $9.00 |
| 16835 | Adaptor, RPC, 900 cfm exh | $206.00 |
| 16836 | Adaptor, RPC, 600 cfm exh | $223.00 |
| 16837 | Adaptor, RPC, 900 cfm inlet | $101.00 |
| 16887 | Recl hose supp, 900 cfm 6" inlet | $164.00 |
| 16893 | Tool, auto gun adjusting | $67.00 |
| 16939 | Sump pipe asmbly, 600/720 (7x5x5) | $300.00 |
| 16973 | Auto gun holding rod | $44.00 |
| 17008 | Liner, 900 cfm recl body cyl | $454.00 |
| 17025 | Liner, 900 cfm recl top plate | $292.00 |
| 17028 | Screen, recl, w/o clip, #4.5 mesh | $49.00 |
| 17030 | Motor mount, 1200 cfm 5 hp | $229.00 |
| 17209 | Auto gun mount bar, 18" slotted | $34.00 |
| 17210 | Auto gun mount bar, 12" slotted | $34.00 |
| 17211 | Auto gun mount bar, 6" slotted | $20.00 |
| 17243 | Adaptor, RPH, 900 cfm exh | $202.00 |
| 17278 | Adaptor, RPH, 1200 cfm inlet | $145.00 |
| 17279 | Adaptor, RPH, 1200 cfm exh | $223.00 |
| 17280 | Adaptor, RPH, 600 cfm exh | $198.00 |
| 17281 | Adaptor, RPH, 600 cfm inlet | $96.00 |
| 17408 | Inlet plate asmbly, 900 RP | $130.00 |
| 17617 | Paddle wheel, 1200 cfm 5 hp | $458.00 |
| 17671 | Paddle wheel, 2500 cfm 10 hp | $779.00 |
| 17675 | Recl, press, 600 cfm 14" w/o exh | $1,428.00 |
| 18169 | Guide, door, A200 I/S | $103.00 |
| 18170 | Guide, door, A200 O/S | $103.00 |
| 18254 | Basket asmbly, 1/16", DCM161 | $386.00 |
| 18292 | Screen, recl, 8" OD w/clip, #4.5 mesh | $49.00 |
| 18318 | Vortex inner cylinder, 1800cfm | $124.00 |
| 18329 | Turntable, rplcmnt 20" dia, 500# | $286.00 |
| 18414 | Damper, 900 cfm, RP | $155.00 |
| 18460 | Extrusion, trim edge, per foot | $4.00 |
| 18475 | Recl outlet plate, 300 cfm | $76.00 |
| 19041 | Tool, BNP gun adjusting | $92.00 |
| 19058 | Damper, 2500/3600 cfm 10" outlet | $370.00 |
| 19059 | Vortex cyl, 300 cfm exh mount | $590.00 |
| 19062 | Vortex cyl, 600 cfm exh mount | $601.00 |
| 19065 | Vortex cyl, 900 cfm exh mount | $643.00 |
| 19068 | Vortex cyl, 1200 cfm exh mount | See 25434 |
| 19072 | Vortex cyl, 1800 cfm exh mount | $748.00 |
| 19077 | Vortex cyl, 300 cfm pull-thru | $538.00 |
| 19080 | Vortex cyl, 600 cfm pull-thru | $548.00 |
| 19084 | Vortex cyl, 900 cfm pull-thru | $559.00 |
| 19087 | Vortex cyl, 1200 cfm pull-thru | See 25432 |
| 19090 | Vortex cyl, 1800 cfm pull-thru | $695.00 |
| 19121 | Filter cartr, for VI, 12-3/4" x 30" | $248.00 |
| 19122 | Filter cartr, for III, 9" x 26" | $195.00 |
| 19123 | Pilot actuator, spring return | $21.00 |
| 19150 | Gauge, pressure 0-160 clip | $55.00 |
| 19152 | Actuator, adj door interlock | $7.00 |
| 19153 | Interlock actuator kit | $13.00 |
| 19156 | Motor, 5hp, 3450 rpm, 184T frame | $989.00 |
| 19162 | Satellite retrofit asmbly | $416.00 |
| 19188 | Fitting, 3/4 x 90 swivel | $16.00 |
| 19189 | Exhauster asmbly, remote mount | $149.00 |
| 19200 | Grit valve knob, thread | Disc |
| 19201 | Grit valve stem with o-rings | Disc |
| 19206 | Grit valve stem less o-rings | Disc |
| 19223 | Wear plate, 1200 cfm, rbr-lined | $107.00 |
| 19232 | Paddle wheel, Pulsar III | $206.00 |
| 19234 | Paddle wheel, Pulsar VI | $212.00 |
| 19240 | Drum lid | See 23411 |
| 19258 | Spacer, foot pedal | $0.70 |
| 19261 | Cylinder, air, M-section transition | $183.00 |
| 19262 | Rod clevis asmbly, 1 1/2 bore cyl | $16.00 |
| 19340 | Cab BNP 55S 600 RPC, 230/3/60 | CALL |
| 19371 | Motor starter | See 23661 |
| 19383 | Contact | See 23110 |
| 19397 | Push button | See 23130 |
| 19399 | Push button, red | See 23131 |
| 19418 | Transformer | $460.00 |
| 19420 | Light asmbly, control box style | $332.00 |
| 19439 | Switch, rocker, for Pulsar contr box | $17.00 |
| 19451 | Tubing, 1/2" OD poly, per foot | $3.00 |
| 19452 | Connector, 1/2" polytuff straight | $10.00 |
| 19453 | Connector, 1/2" polytuff 90 | $15.00 |
| 19509 | Screw, 5/16" x 1-1/4" hex head | $0.70 |
| 19511 | Damper, 12/1800 cfm 8" outlet | $311.00 |
| 19512 | Damper, 12/1800 cfm w/muff adpt | $391.00 |
| 19514 | Damper, 25/3600 cfm w/muff adpt | $428.00 |
| 19521 | O-ring, MLNM | $3.00 |
| 19528 | Cord, ACS extn, 100ft w/twist-lok | $407.00 |
| 19529 | Cord, ACS extn 200 ft | Disc |
| 19530 | Cord, ACS extn 300 ft | Disc |
| 19570 | Fitting, 1/8" bulk head | $8.00 |
| 19571 | Screw, 10-32 x 1/2" flat head | $0.60 |
| 19572 | Dust container | See 23411 |
| 19576 | Foot pedal cam follower | $8.00 |
| 19577 | Hose, 1/8" ID twin urethane per foot | $4.00 |
| 19578 | Valve, pulse, all Pulsars | $118.00 |
| 19728 | Latch, cab door | $29.00 |
| 19730 | Stop, strike BNP EU-door | $18.00 |
| 19735 | Hinge, lift-off, EU-door | $9.00 |
| 19929 | Cab BNP 55S 300 DB, 115/1/60 | CALL |
| 19930 | Cab BNP 55S 300 DF, 115/1/60 | CALL |
| 19933 | Cab BNP 55S 600 DB, 115/1/60 | CALL |
| 19934 | Cab BNP 55S 600 DB, 230/3/60 | CALL |
| 19935 | Cab BNP 55S 600 DF, 115/1/60 | CALL |
| 19936 | Cab BNP 55S 600 DF, 230/3/60 | CALL |
| 19938 | Cab BNP 55S 600 RPC, 115/1/60 | CALL |
| 19941 | Cab BNP 65 300 DB, 115/1/60 | CALL |
| 19942 | Cab BNP 65 300 DF, 115/1/60 | CALL |
| 19945 | Cab BNP 65 600 DB, 115/1/60 | CALL |
| 19946 | Cab BNP 65 600 DB, 230/3/60 | CALL |
| 19947 | Cab BNP 65 600 DF, 115/1/60 | CALL |
| 19948 | Cab BNP 65 600 DF, 230/3/60 | CALL |
| 19950 | Cab BNP 65 600 RPC, 115/1/60 | CALL |
| 19952 | Cab BNP 65 600 RPC, 230/3/60 | CALL |
| 19955 | Cab BNP 220S 600 DF, 115/1/60 | CALL |
| 19956 | Cab BNP 220S 600 DF, 230/3/60 | CALL |
| 19958 | Cab BNP 220S 600 RPC, 115/1/60 | CALL |
| 19960 | Cab BNP 220S 600 RPC, 230/3/60 | CALL |
| 19962 | Cab BNP 220S 900 DF, 230/3/60 | CALL |
| 19964 | Cab BNP 220S 900 RPC, 230/3/60 | CALL |
| 19965 | Cab BNP 220S 900 RPH, 230/3/60 | CALL |
| 19967 | Cab BNP 65P 600 DF, 115/1/60 | CALL |
| 19968 | Cab BNP 65P 600 RPC, 115/1/60 | CALL |
| 19970 | Cab BNP 220P 900 DF, 230/3/60 | CALL |
| 19971 | Cab BNP 220P 900 RPC, 230/3/60 | CALL |
| 19984 | Cab Aerolyte PCS 3636A DF | CALL |
| 19985 | Cab Aerolyte PCN 4050A RP | CALL |
| 19991 | Foot pedal bottom | $44.00 |
| 20004 | Stop, over-travel | $4.00 |
| 20017 | Foot pedal top, ZERO | $37.00 |
| 20026 | Valve, air, foot pedal | $74.00 |
| 20064 | Latch kit, door | $80.00 |
| 20065 | Door, bullet-hinge, left, 30 | $475.00 |
| 20066 | Door, bullet-hinge, left, 50 | $502.00 |
| 20067 | Door, bullet-hinge, right, 50 | $502.00 |
| 20068 | Door, bullet-hinge, left, 55 | $433.00 |
| 20069 | Door, bullet-hinge, right, 55 | $433.00 |
| 20070 | Door, bullet-hinge, left, 65/Pulsar III | $475.00 |
| 20071 | Door, bullet-hinge, right, 65/Pulsar III | $475.00 |
| 20072 | Door, pass-thru, left, BNP 210, bullet hinge | $475.00 |
| 20073 | Door, bullet-hinge, right, 210 | $475.00 |
| 20074 | Door, bullet-hinge, left, 220/Pulsar VI | $496.00 |
| 20075 | Door, bullet-hinge, right, 220/Pulsar VI | $496.00 |
| 20081 | Dust coll, with hose, INEX | $479.00 |
| 20088 | INEX coll motor cover | Disc |
| 20089 | INEX coll top lid | Disc |
| 20092 | INEX coll blower wheel | Disc |
| 20093 | INEX coll bottom lid | Disc |
| 20095 | INEX blower wheel nut | Disc |
| 20096 | INEX coll deflector | Disc |
| 20097 | INEX coll filter cage | Disc |
| 20098 | Filter cartr, INEX coll, 8" L | $109.00 |
| 20099 | INEX cartr plate | Disc |
| 20100 | INEX cartr nut | Disc |
| 20101 | Hose, vacuum, INEX | Disc |
| 20105 | Valve, 1-1/2" pulse | $164.00 |
| 20108 | Nut, 1/2" wing | $3.00 |
| 20109 | Foot pedal grooved drive pin | $5.00 |
| 20118 | Valve, 1-1/4" swing check | $164.00 |
| 20121 | Foot pedal compression spring | $11.00 |
| 20148 | Foot pedal base | $44.00 |
| 20156 | Cab Aerolyte PCN 3672A DF | CALL |
| 20157 | Cab Aerolyte PRN 3672A RP | CALL |
| 20158 | Cab Aerolyte PRN 6060A RP | CALL |
| 20181 | Dust container, ring & lid | See 23411 |
| 20181 | Lock ring for 4.5 gal drum lid | See 23419 |
| 20184 | Gasket, BClem manway | $82.00 |
| 20185 | Cab Pulsar III suction sys 115/1/60 | CALL |
| 20190 | Cab Pulsar VI suction sys 115/1/60 | CALL |
| 20194 | Foot pedal asmbly, Pulsar | $254.00 |
| 20195 | Foot pedal asmbly, BNP | $177.00 |
| 20212 | Screw, #10 x 1" pan head | $0.70 |
| 20213 | Helmet, APL 60HP,CFC,50ft hose | $662.00 |
| 20214 | Helmet, APL 60HP,CFC,CPF,hose | $866.00 |
| 20216 | Grit valve rplcmnt knob kit | Disc |
| 20217 | Monitor kit, underspeed, elevator | $444.00 |
| 20234 | Nipple, 1-1/4" x 13-1/2" | $20.00 |
| 20236 | Pusher line, formed, 4 & 6 cf | Disc |
| 20238 | Pusher line, formed, 2 cf | Disc |
| 20245 | Pin, hitch cotter 1/4"-5/16" | $0.70 |
| 20246 | Pin, clevis 1/4" x 1-3/8" | $2.00 |
| 20247 | Gasket, sump plate hose inlet | $9.00 |
| 20261 | Cab INEX 3048R w/300 recl & DB | CALL |
| 20265 | Recl, suct, 600 cfm w/o exh 164 | $1,302.00 |
| 20266 | Recl, suct, 600 cfm w/1 hp exh 164 | CALL |
| 20267 | O-ring, 1-1/2" ID, QTM air valve | $2.00 |
| 20268 | QTM plunger wiper, air valve | $20.00 |
| 20273 | Gear rack, QTM | Disc |
| 20274 | Metering plate & shaft, Quantum | $121.00 |
| 20317 | Pot mover, wheel and tire asmbly | $116.00 |
| 20320 | Pot mover, axle | $31.00 |
| 20331 | Pot mover complete | $731.00 |
| 20340 | Recl, Pulsar III side w/12417 | $1,294.00 |
| 20341 | Recl, Pulsar VI side w/12417 | $1,970.00 |
| 20342 | Sump pipe asmbly, 5", 220 w/600 | $67.00 |
| 20343 | Adaptor, outlet, Pulsar III | $86.00 |
| 20344 | Adaptor, outlet, Pulsar VI | $93.00 |
| 20345 | Vortex inner cylinder, 300 cfm | $75.00 |
| 20346 | Vortex inner cylinder, 600 cfm | $80.00 |
| 20347 | Dust container cover | See 23411 |
| 20349 | Wheel and tire, 10" x 2.75 black | $31.00 |
| 20357 | Screen, 20" machine, rcsd | $124.00 |
| 20358 | Cover, 20" dia blast machine | $118.00 |
| 20413 | FlatTrak drive cylinder boot kit | $161.00 |
| 20416 | Dust coll, RP for ELS | CALL |
| 20417 | Lid asmbly for ELS dust coll | $832.00 |
| 20418 | Drum/collection container, ELS | $800.00 |
| 20419 | Lid, ELS precleaner, 2" inlet | $995.00 |
| 20426 | Wheel and tire, 12" x 3.00 black | $81.00 |
| 20427 | Wheel and tire, 16" x 4.00 black | $88.00 |
| 20429 | Adaptor, 1/8" w/.052" orifice | $13.00 |
| 20430 | ELS-5-290 sys w/wet dust drum | CALL |
| 20431 | ELS-6-290 sys w/RP dust coll | CALL |
| 20433 | FlatTrak drive cylinder asmbly | $1,138.00 |
| 20438 | Filter, magnehelic line | $135.00 |
| 20444 | Filter cartr, ELS, 9" dia x 24" | $282.00 |
| 20453 | Glove, LH Wetblast | $49.00 |
| 20454 | Glove, RH Wetblast | $49.00 |
| 20458 | Filter element, inline, paper for MARS | $384.00 |
| 20478 | Hose, flex, 14" diam, unlined per foot | $44.00 |
| 20479 | Roll pin, foot pedal | $0.80 |
| 20480 | Filter cartr, fine-mesh, RPC/RPH, 13" x 36" | See 22556 |
| 20483 | Foot pedal less hose, ZERO | $132.00 |
| 20484 | Speed control, A200 part rotation | $496.00 |
| 20485 | Control, A200, 1 hp max, 120v | $821.00 |
| 20488 | Gasket, Sentinel flange adaptor | $4.00 |
| 20490 | Seat, Sentinel | $7.00 |
| 20491 | Gasket, cylinder cap | $4.00 |
| 20492 | Gasket, upper body seat plate, Sntl | $4.00 |
| 20494 | Sntl piston shut-off | $116.00 |
| 20495 | Sntl wear sleeve | $69.00 |
| 20497 | Sntl seat plate | $32.00 |
| 20498 | Handle, abr mtrg hvy duty | $36.00 |
| 20499 | Sntl metering plate and stem | $55.00 |
| 20508 | Valve, abr mtrg, Sntl, w/insp plate & ACS | $760.00 |
| 20509 | Valve, abr mtrg, Sntl w/ACS w/o insp pl | See 20508 |
| 20511 | Sntl lower body | $62.00 |
| 20512 | Sntl cylinder cap | $21.00 |
| 20513 | Sntl flange adapt w/inspect plate | $47.00 |
| 20514 | Valve upper body, Sntl | $282.00 |
| 20515 | Sntl piston cup | $31.00 |
| 20516 | O-ring, Sentinel, .734 ID | $2.00 |
| 20518 | Sntl seal | $18.00 |
| 20519 | Roll pin, 1/16", Sentinel | $0.60 |
| 20520 | O-ring, 1.614" ID | $0.70 |
| 20522 | Sntl adaptor flange w/o insp pl | $70.00 |
| 20526 | Dust coll, RPC-2 900 cfm, 2 hp, 230v | CALL |
| 20527 | Dust coll, RPH-2 600 cfm, 1 hp, 115v | CALL |
| 20528 | Dust coll, RPH-2 600 cfm, 1 hp, 230v | CALL |
| 20529 | Dust coll, RPH-2 900 cfm, 2 hp, 230v | CALL |
| 20530 | Dust coll, RPH-3 1200 cfm, 5 hp, 230v | CALL |
| 20531 | Dust coll, RPH-4 1800 cfm, 7.5 hp, 230v | CALL |
| 20532 | Dust coll, RPH-6 2500 cfm, 10 hp, 230v | CALL |
| 20533 | Dust coll, RPH-8 3600 cfm, 15 hp, 230v | CALL |
| 20570 | Pump, BNP 250 diaphr | $1,693.00 |
| 20572 | Tubing, 5/8 tygon per foot | $13.00 |
| 20574 | Bushing, 3/4" x 1/2", ss | $14.00 |
| 20575 | Nipple, 1/2" x 2", brass | $7.00 |
| 20576 | Nipple, 1/2" x 3", ss | $11.00 |
| 20579 | Conv kit, BNP250 pump, slurry to diaphr | CALL |
| 20582 | Screen, BNP 250 diaphr pump | $76.00 |
| 20593 | Slide cover kit for BNP162 | $24.00 |
| 20594 | Slide cover kit for BNP164 | $24.00 |
| 20595 | Slide cover kit for BNP166 | $24.00 |
| 20596 | Support, recl hose, 1200 cfm 7" inlet | $233.00 |
| 20597 | Support, recl hose, 1800 cfm 8" inlet | $254.00 |
| 20598 | Recl hose supp, 2500 cfm 10" inlet | $265.00 |
| 20599 | Support, recl hose, 3600 cfm 10" inlet | $311.00 |
| 20600 | Sntl/Auto-Quantum spring | $46.00 |
| 20608 | Valve, abr mtrg, Sntl, w/o ACS w/insp plate | $743.00 |
| 20609 | Valve, abr mtrg, Sntl w/o ACS & insp pl | See 20608 |
| 20619 | Support, recl hose, 900 cfm, 7" outlet | $158.00 |
| 20641 | B/Mach cab, 1646 Aerolyte | CALL |
| 20660 | PVR valve clamp asmbly | $21.00 |
| 20661 | PVR valve decal kit | $18.00 |
| 20663 | Rem cont sys, SRC125C press-hold pneu | $1,565.00 |
| 20671 | Rem cont sys, DRC125C pneu 2-op ACS | CALL |
| 20672 | B/Mach Classic sta, 6 cf, pr-hold, ACS | CALL |
| 20673 | B/Mach Classic port, 6 cf, pr-hold, ACS | CALL |
| 20730 | Support, recl hose, 1800 cfm outlet | $223.00 |
| 20731 | Support, recl hose, 2500 cfm outlet | $233.00 |
| 20734 | Axle, 10" x 2.75" | $49.00 |
| 20735 | Leg pad, 1642 RH | $26.00 |
| 20736 | Leg pad, 1642 LH | $26.00 |
| 20739 | Valve, air 3-way, 110v 1/8 npt | $103.00 |
| 20742 | Label, FlatTrak cylinder | $5.00 |
| 20750 | FlatTrak primary drive 36" | $335.00 |
| 20751 | FlatTrak extension, primary 30" | $168.00 |
| 20752 | FlatTrak extension, primary 60" | $223.00 |
| 20753 | FlatTrak extension, primary 120" | $374.00 |
| 20755 | FlatTrak cross drive | $379.00 |
| 20756 | FlatTrak extension, 36" cross | $205.00 |
| 20757 | FlatTrak extension, 72" cross | $263.00 |
| 20759 | FlatTrak elevator extension | $188.00 |
| 20760 | FlatTrak brkt, track splice | $9.00 |
| 20761 | FlatTrak brkt, end chan to track | $14.00 |
| 20762 | FlatTrak brkt, primary carr splice | $9.00 |
| 20763 | FlatTrak brkt, cross carr splice | $22.00 |
| 20764 | FlatTrak brkt, angle front roller | $65.00 |
| 20765 | FlatTrak roller plate | $17.00 |
| 20786 | FlatTrak cylinder cover | $52.00 |
| 20788 | FlatTrak vane,shrt conv 3-9/16 | $44.00 |
| 20789 | FlatTrak vane,long conv 14-5/8 | $46.00 |
| 20790 | FlatTrak vane,shrt prim 12-7/16 | $49.00 |
| 20791 | FlatTrak vane,long prim 32-3/16 | $56.00 |
| 20793 | FlatTrak brkt, RH elev extension | $44.00 |
| 20794 | FlatTrak brkt, LH elev extension | $44.00 |
| 20795 | FlatTrak brkt, strt elevator boot | $25.00 |
| 20810 | FlatTrak carriage, cr conv drive | $931.00 |
| 20811 | FlatTrak carriage, cr extn 36" | $280.00 |
| 20812 | FlatTrak carriage, cr extn 72" | $386.00 |
| 20813 | FlatTrak carriage, primary drive | $548.00 |
| 20814 | FlatTrak carriage, 30" extension | $198.00 |
| 20815 | FlatTrak carriage, 60" extension | $278.00 |
| 20816 | FlatTrak carriage, 120" extension | $418.00 |
| 20820 | FlatTrak end beam, 18" cross trk | $240.00 |
| 20823 | FlatTrak end channel, primary 36" | $183.00 |
| 20829 | Cap, rain, BClem 1-3/4" | $28.00 |
| 20830 | FlatTrak roller asmbly | $79.00 |
| 20838 | FlatTrak tubing, 5/32" OD per ft | $2.00 |
| 20839 | FlatTrak conn, 1/4" x 5/32" tube | $9.00 |
| 20842 | Clevis pin, 1/2", FlatTrak | $6.00 |
| 20843 | Cotter, FlatTrak 1/2" clevis pin | $2.00 |
| 20844 | FlatTrak rod end, female thread | $31.00 |
| 20845 | FlatTrak elbow, 1/4" x 5/16" tube | $11.00 |
| 20846 | FlatTrak conn, 1/4" x 5/16" tube | $9.00 |
| 20847 | Tee, 1/4" brass male | $13.00 |
| 20848 | Connector, 1/4" x 5/16" tube wye | $19.00 |
| 20849 | FlatTrak pressure switch | $179.00 |
| 20850 | FlatTrak flow control valve | $25.00 |
| 20851 | FlatTrak air manifold, six-station | $516.00 |
| 20852 | FlatTrak manifold, blanking nut | $28.00 |
| 20854 | FlatTrak cylinder rod boot | $79.00 |
| 20855 | Nut, jam, 1/2" nf, FlatTrak | $1.00 |
| 20856 | Tubing, nylon 5/16", per ft, FlatTrak | $3.00 |
| 20857 | FlatTrak valve, 4-way | $158.00 |
| 20858 | FlatTrak fitting, 1/2" bulkhead | $21.00 |
| 20889 | Recl, press, 600 cfm 14" w/1 hp exh | CALL |
| 20963 | Muffler, diaphr pump | $61.00 |
| 20967 | Cap, baseball - Clemco | See 24987 |
| 20968 | HB deflection tip, boron | $206.00 |
| 20969 | HB throat sleeve, boron | $107.00 |
| 20975 | Helmet, APL 20HP DLX w/CFC, less resp hose | $504.00 |
| 20976 | Window frame, APL 20 lens | $21.00 |
| 20978 | Cab INEX 3048 w/o dust coll | CALL |
| 20991 | Rem cont sys, SAC125C press-hold 120v | CALL |
| 20999 | Rem cont sys, SDC125C press-hold 12v | CALL |
| 21007 | Rem cont sys, DAC125C 120v 2-op ACS | CALL |
| 21015 | Rem cont sys, DDC125C 12v 2-op ACS | CALL |
| 21020 | O-ring, Grit/Sentinel valve | $2.00 |
| 21021 | Sntl packing gland | $32.00 |
| 21027 | Storage hopper, 24"dia, 24" h, 6 cu.ft. | $714.00 |
| 21036 | Cap, baseball - ZERO | See 24987 |
| 21040 | Latch, button rubber, APL 20 | $5.00 |
| 21041 | Gasket, APL 20 lens frame | $9.00 |
| 21048 | O-ring Sentinel, 2.234 ID | $2.00 |
| 21050 | B/Mach Classic port, 0.5 cf 1/2" pipe | $1,617.00 |
| 21051 | B/Mach Classic port, 0.5 cf w/TLR-50A | $1,869.00 |
| 21052 | B/Mach Classic port, 1 cf 1/2" pipe | CALL |
| 21053 | B/Mach Classic port, 1 cf w/TLR-50A | $1,995.00 |
| 21054 | B/Mach Classic port, 2 cf 1" pipe | CALL |
| 21055 | B/Mach Classic sta, 2 cf 1" pipe | CALL |
| 21056 | B/Mach Classic port, 2 cf w/TLR100,FSV | CALL |
| 21057 | B/Mach Classic port, 2 cf w/TLR100,ACS | CALL |
| 21058 | B/Mach Classic sta, 2 cf w/TLR100,FSV | CALL |
| 21059 | B/Mach Classic sta, 2 cf w/TLR100,ACS | CALL |
| 21060 | B/Mach Classic port, 2 cf package 3 | CALL |
| 21061 | B/Mach Classic port, 3 cf w/TLR100,ACS | CALL |
| 21062 | B/Mach Classic port, 3 cf w/TLR300,ACS | CALL |
| 21063 | B/Mach Classic sta, 3 cf w/TLR100,FSV | CALL |
| 21064 | B/Mach Classic sta, 3 cf w/TLR100,ACS | CALL |
| 21066 | B/Mach Classic sta, 3 cf w/TLR300,ACS | CALL |
| 21067 | B/Mach Classic port, 6 cf w/TLR100,ACS | CALL |
| 21068 | B/Mach Classic port, 6 cf w/TLR300,ACS | CALL |
| 21069 | B/Mach Classic port, 6 cf LoPot TLR100 | CALL |
| 21070 | B/Mach Classic port, 6 cf LoPot TLR300 | CALL |
| 21071 | B/Mach Classic sta, 6 cf w/TLR100,FSV | CALL |
| 21072 | B/Mach Classic sta, 6 cf w/TLR100,ACS | CALL |
| 21073 | B/Mach Classic sta, 6 cf w/TLR300,FSV | CALL |
| 21074 | B/Mach Classic sta, 6 cf w/TLR300,ACS | CALL |
| 21075 | B/Mach Classic sta, 7 cf w/TLR300,ACS | CALL |
| 21076 | B/Mach Classic sta, 7 cf w/TLR,ACS & 7 cf hpr | CALL |
| 21077 | B/Mach Classic sta, 10 cf w/TLR300,ACS | CALL |
| 21078 | B/Mach Classic sta, 20 cf w/TLR300,ACS | CALL |
| 21079 | ELS-2-290 w/RP dust coll | CALL |
| 21080 | ELS-4-290 w/RP dust coll | CALL |
| 21082 | Valve, dump, dust coll, 6-inch diam | $683.00 |
| 21083 | Dust bag, 4 cf ELS/AWAC | $41.00 |
| 21084 | Gasket, BClem manway | See 20184 |
| 21086 | Hose, supa blast | See 23103 |
| 21087 | Hose, supa blast | See 23104 |
| 21088 | Cplg, CQPS-1 (nyl), supa | $18.00 |
| 21090 | Nozzle, CTB-2, 1/8" boron carb | $103.00 |
| 21091 | Nozzle, CTB-3, 3/16" boron carb | $103.00 |
| 21092 | Nozzle, CTB-4, 1/4" boron carb | $103.00 |
| 21093 | Nozzle, CTB-5, 5/16" boron carb | $103.00 |
| 21094 | Nozzle, CTB-6, 3/8" boron carb | $103.00 |
| 21095 | Nozzle, CTB-8, 1/2" boron carb | $103.00 |
| 21100 | Alox kit, 3636 - no direct subst | Disc |
| 21101 | Alox kit, 4050 - no direct subst | Disc |
| 21104 | Alox kit 600P 900 cfm, fac inst | CALL |
| 21105 | Alox kit 720P 900 cfm, fac inst | CALL |
| 21118 | Partition kit, helmet air channel | $4.00 |
| 21119 | Screw, 8-32 x 1/2" | $0.50 |
| 21121 | Hose, supa blast | See 23101 |
| 21122 | Hose, supa blast | See 23102 |
| 21125 | Screen/frame, recl, 1200 cfm | $338.00 |
| 21126 | Screen/frame, recl, 1800 cfm | $338.00 |
| 21128 | Storage hopper, 16" dia, 16 1/2" h, 2 cf | $567.00 |
| 21135 | B/Mach cab, 1642 BNP | CALL |
| 21140 | Housing, fan top plate PULSAR VI | $107.00 |
| 21145 | Fitting, control box push-lok | $0.80 |
| 21152 | Rem cont sys, TLR100C w/piston OV, ACS | $1,554.00 |
| 21153 | Rem cont sys, TLR300C w/piston OV, ACS | $1,617.00 |
| 21154 | Rem cont sys, TLR100DC diaphr OV, ACS | $1,554.00 |
| 21155 | Rem cont sys, TLR300DC diaphr OV, ACS | $1,617.00 |
| 21156 | Cab BNP Double 220 900 DF | CALL |
| 21157 | Cab BNP Double 220 900 RPH | CALL |
| 21158 | Cab BNP Double 220P 900 DF | CALL |
| 21159 | Cab BNP Double 220P 900 RPH | CALL |
| 21164 | Roll pin, 1/8" x 1/2", QTM | $0.80 |
| 21165 | O-ring, 7/8" OD x 5/8"ID | $0.80 |
| 21182 | Rem cont sys, EAC300C 120v sgl-op ACS | CALL |
| 21184 | Rem cont sys, EDC300C 12v sgl-op ACS | CALL |
| 21190 | Hollo-Blast (bc tip) with 1/2" noz | $830.00 |
| 21191 | Hollo-Blast (bc tip) w/o nozzle | $735.00 |
| 21193 | Recl, press, 900 cfm 14" w/o exh | CALL |
| 21194 | Recl, press, 900 cfm 14" w/2 hp exh | CALL |
| 21196 | Alox kit Double 220S, fac inst | $1,176.00 |
| 21199 | Table/track, BNP Double 220 - 20" | CALL |
| 21226 | Light asmbly, with switch, Dbl cabs | $470.00 |
| 21232 | Inlet adaptor w/damper, 300 DF | $111.00 |
| 21233 | Gasket, 300 DF inlet plate | $11.00 |
| 21236 | Gasket, 5/8" x 2-1/2", 600/720 | $3.00 |
| 21248 | Alox kit Double 220P, fac inst | $1,092.00 |
| 21250 | Recl, press, 600 cfm 16" w/o exh | $1,460.00 |
| 21251 | Recl, press, 600 cfm 16" w/1 hp exh | CALL |
| 21252 | Recl, press, 900 cfm 16" w/o exh | CALL |
| 21253 | Recl, press, 900 cfm 16" w/2 hp exh | CALL |
| 21265 | Screen, recl, #8 mesh | $72.00 |
| 21269 | Filter basket kit, clamp ring retro | $30.00 |
| 21270 | Clamp, 1-7/16" OD | $4.00 |
| 21275 | Screen, recl, #4.5 mesh | $76.00 |
| 21280 | Screen, recl, retrofit kit | $101.00 |
| 21281 | Abrasive cleaner asmbly w/bag, LH | CALL |
| 21282 | Abrasive cleaner asmbly w/drum, LH | CALL |
| 21284 | Dust drum lid asmbly, 30 gal | $383.00 |
| 21289 | Valve, butterfly, 5-inch diameter | $583.00 |
| 21290 | Abrasive clnr drum, 3/16" holes | $595.00 |
| 21292 | Recl, press, 600 cfm 16" pull-thru | $1,911.00 |
| 21293 | Recl, press, for Pulsar IX-P | CALL |
| 21293 | Recl, press, 900 cfm 16" pull-thru | CALL |
| 21298 | Latch, APL 20 lens frame | $21.00 |
| 21299 | Helmet, APL 20LP DLX w/CFC, less resp hose | $504.00 |
| 21300 | Helmet, APL 60HP w/CFC, less resp hose | $557.00 |
| 21301 | Cape, APL 20 | $70.00 |
| 21303 | Recl, suct, 300 cfm pull-thru | CALL |
| 21304 | Recl, suct, 600 cfm pull-thru | $1,840.00 |
| 21305 | Recl, suct, 900 cfm pull-thru | CALL |
| 21306 | Recl, suct, 1200 cfm pull-thru, n-mod | See 24060 |
| 21307 | Recl, suct, 1800 cfm pull-thru | CALL |
| 21311 | Nozzle, extension (SA), 4" w/tip & ring | $397.00 |
| 21312 | O-ring, 1-1/8" ID, QTM grit valve | Disc |
| 21313 | QTM rack & pinion housing | Disc |
| 21314 | Adaptor, QTM | $86.00 |
| 21315 | QTM plunger wiper, grit valve | Disc |
| 21317 | QTM cylinder cover | $27.00 |
| 21318 | Screw, 5/16" x 1" skt hd, QTM | $0.70 |
| 21319 | QTM thrd out flange, grit valve | See 22077 |
| 21321 | QTM screw, 5/16" x 1-3/4" skt hd | $7.00 |
| 21322 | QTM gasket, lower flange | $9.00 |
| 21323 | QTM piston stop | $30.00 |
| 21326 | QTM plunger, grit valve | $80.00 |
| 21329 | QTM piston | $57.00 |
| 21330 | QTM grit mtrg valve, Auto | See 24447 |
| 21331 | Service kit, FlatTrak drive cylinder 21437 | $212.00 |
| 21332 | Service kit, FlatTrak drive cylinder 20433 | $311.00 |
| 21336 | Valve, Millennium in/out asmbly | $693.00 |
| 21338 | Valve body, inlet, MLNM | $254.00 |
| 21339 | MLNM cylinder cap | $43.00 |
| 21341 | Plug, 1-1/4" pipe | See 01762 |
| 21342 | QTM wear sleeve, air valve | $49.00 |
| 21343 | QTM plunger, air valve | Disc |
| 21344 | QTM urethane seat, air valve | $26.00 |
| 21345 | Valve body, exh MLNM | $97.00 |
| 21346 | MLNM exh housing | $24.00 |
| 21349 | QTM body, air valve | $323.00 |
| 21350 | Valve, air, auto Quantum | $542.00 |
| 21353 | Abrasive clnr drum, 1/8" holes | $595.00 |
| 21354 | Abrasive cleaner asmbly w/drum, RH | CALL |
| 21355 | Abrasive cleaner asmbly w/bag, RH | CALL |
| 21356 | Service kit, reg 12051, 1-1/2" Master Pneu | $233.00 |
| 21365 | Monitor/pick-up, integr speed | $368.00 |
| 21373 | CO Monitor, ABL 4021 | See 22894 & 23017 |
| 21376 | Flow meter, CMS 1, 2 & ABL 4021 | $60.00 |
| 21377 | Sensor, ABL 4021 | $643.00 |
| 21378 | Calibr connector, ABL 4021 | See 23011 |
| 21381 | ABL 4021 Monitor | See 23017 or 22894 |
| 21382 | Regulator, with filter, ABL 4021 | See 23013 |
| 21383 | Filter, rplcmnt, ABL 4021 | $47.00 |
| 21390 | Turntable, rplcmnt 30" dia, 500# | $594.00 |
| 21400 | Turntable, rplcmnt 48" dia, 500# | $1,134.00 |
| 21402 | Screw, #6 x 1/2" sht met | $0.80 |
| 21403 | Screw, #6 x 1" sht met | $2.00 |
| 21409 | Lenses, APL 20 inner .125", 5 pk | $16.00 |
| 21410 | Lenses, APL 20 middle .094", 5 pk | $17.00 |
| 21411 | Lenses, APL 20 cover .0075", 25 pk | $16.00 |
| 21413 | Hose, LP helmet, 1/2" x 100 ft | $298.00 |
| 21415 | CFC const flow conn, HP, w/o belt | $30.00 |
| 21419 | Helmet, APL 20HP DLX w/ACV, less resp hose | $504.00 |
| 21420 | Helmet, APL 20HP DLX w/CCAC, less resp hose | $604.00 |
| 21421 | Helmet, APL 20HP DLX w/CCT, less resp hose | $651.00 |
| 21422 | CFC const flow conn w/belt, HP | $39.00 |
| 21423 | Helmet, APL 20LP DLX w/CFC and 50ft resp hose | $609.00 |
| 21429 | CFC const flow conn, LP w/o belt | $30.00 |
| 21437 | FlatTrak cylinder, cross drive | $808.00 |
| 21438 | Sntl mtrg plate, urethane | $70.00 |
| 21439 | Valve, abr mtrg, Sntl, fine mesh | $748.00 |
| 21448 | Regulator, pulse retro kit | $70.00 |
| 21452 | Fuse, FRN3 | $26.00 |
| 21453 | Motor, A-250 satellite, 1/4 hp | $328.00 |
| 21460 | B/Mach S/King, wet/dry, asmbly | CALL |
| 21464 | Agitator mount bracket, S/King | $64.00 |
| 21465 | Agitator tine asmbly, S/King | $286.00 |
| 21469 | Bracket, water pump, S/King | $54.00 |
| 21473 | Cover, 16" machine, S/King | See 02335 |
| 21474 | Screen, 16" machine, S/King | See 03099 |
| 21476 | Agitator mount pad, S/King | $19.00 |
| 21477 | Agitator, pneumatic, S/King | $578.00 |
| 21479 | Regulator, 1/4" pilot, S/King | $88.00 |
| 21480 | Gauge, panel mount, S/King | $80.00 |
| 21481 | Pump, water, S/King | $1,743.00 |
| 21486 | Pusher line, formed, S/King | $59.00 |
| 21488 | Valve, 3/8" shut-off, S/King | $30.00 |
| 21489 | Valve, press relief 1/4" 100psi, S/King | $21.00 |
| 21490 | B/Mach Contr, 2 cf pneu MQV | CALL |
| 21491 | Handle/frame asmbly, 2 cf cntr mach | $223.00 |
| 21494 | B/Mach Contr, 2 cf 12v MQV | CALL |
| 21505 | B/Mach Contr, 4 cf pneu MQV | CALL |
| 21506 | Handle/frame asmbly, 4 cf cntr mach | $328.00 |
| 21509 | B/Mach Contr, 4 cf 12v MQV | CALL |
| 21517 | Leg cap, contr machine | $34.00 |
| 21522 | Foot pedal bumper | $2.00 |
| 21537 | B/Mach Contr, 2 cf 120v MQV | CALL |
| 21538 | B/Mach Contr, 4 cf 120v MQV | CALL |
| 21543 | B/Mach Contr, 6 cf 12v MQV | CALL |
| 21544 | B/Mach Contr, 2 cf pneu w/CPF | CALL |
| 21545 | B/Mach Contr, 4 cf pneu w/CPF | CALL |
| 21546 | B/Mach Contr, 6 cf pneu w/CPF | CALL |
| 21547 | B/Mach Contr Sys, 2 cf pneu | CALL |
| 21548 | B/Mach Contr Sys, 4 cf pneu | CALL |
| 21549 | B/Mach Contr Sys, 6 cf pneu | CALL |
| 21561 | O-ring, .864 ID x 1.004 OD | $2.00 |
| 21580 | Washers, NW-1 (10 pk) | $15.00 |
| 21581 | Screws, hose coupling - 25 pk | $3.00 |
| 21582 | Screws, supa hose cplg - 25 pk | $3.00 |
| 21583 | Washers, NW-3 (10 pk) | $12.00 |
| 21584 | Gasket, CQGP-2 coupling, 10 pk | $19.00 |
| 21585 | Lock spring, nylon cplg (25 pk) | $26.00 |
| 21600 | Service kit, pulse valve, 1", RP/CDF/Pulsar | $52.00 |
| 21601 | Service kit, pulse valve, 1-1/2", RP/CDF | $195.00 |
| 21606 | B/Mach Contr, 6 cf 120v MQV | CALL |
| 21607 | B/Mach Contr, 2 cf 12v, CPF | CALL |
| 21608 | B/Mach Contr, 4 cf 12v, CPF | CALL |
| 21609 | B/Mach Contr, 6 cf 12v, CPF | CALL |
| 21610 | B/Mach Contr, 6 cf pneu MQV | CALL |
| 21611 | Handle/frame asmbly, 6 cf cntr mach | $380.00 |
| 21619 | Hose, twinline coupled 4 ft | $37.00 |
| 21620 | B/Mach Contr, 2 cf 120v,CPF | CALL |
| 21621 | B/Mach Contr, 4 cf 120v,CPF | CALL |
| 21629 | B/Mach Contr, 6 cf 120v,CPF | CALL |
| 21630 | Pipe support, contr machine | $20.00 |
| 21632 | Nipple, 1-1/4" x 2-1/2" toe | $4.00 |
| 21639 | Cab Pulsar VI-P pressure sys 115/1/60 | CALL |
| 21648 | Pulsar coll-side cover plate | $78.00 |
| 21650 | Hopper, recl, Pulsar VI | $170.00 |
| 21652 | Pulsar recl-side cover plate | $59.00 |
| 21656 | Sump plate, Pulsar suction | $5.00 |
| 21657 | Sump plate, Pulsar pressure | $35.00 |
| 21658 | B/Mach for cab, Pulsar III & VI models | CALL |
| 21660 | Conv kit, Pulsar suction to press | CALL |
| 21666 | Conv kit, Pulsar press to suction | $903.00 |
| 21672 | Filter element, air filter (W), 1" & 1-1/2" | Disc |
| 21674 | Sight glass kit, air filter (W), 1" & 1-1/2" | Disc |
| 21675 | Washers, NW-2 (10 pk) | $15.00 |
| 21678 | Conv kit, MLNM pneu-12v, 4&6 cf | $1,218.00 |
| 21679 | Conv kit, MLNM pneu-120v, 4&6 cf | $1,218.00 |
| 21684 | Filter, air (MS), 1/2" auto drain | $294.00 |
| 21687 | Filter element, air filter (W), 1/2" | Disc |
| 21689 | Sight glass kit, air filter (W), 1/2" | $28.00 |
| 21690 | Radio, WiComm Pro, 2-way radio only | $626.00 |
| 21691 | Headset, supervisor | $531.00 |
| 21692 | Cable asmbly, radio | $405.00 |
| 21693 | Holster, radio chest harness | $83.00 |
| 21696 | Strap holder, chin, APL 20 | $7.00 |
| 21711 | Cplg, CQP-2 (nyl), 1" ID | $18.00 |
| 21717 | Communicator sys HCS-110 | See 24999 |
| 21718 | Communicator sys OCS-110 | See 24999 |
| 21719 | Communicator sys SCS-110 | See 24999 |
| 21722 | Service kit, air filter (N) sight glass | $20.00 |
| 21730 | Valve, inlet segment, MLNM | $530.00 |
| 21731 | Valve, outlet segment, MLNM | $244.00 |
| 21733 | Cplg, CFP-2C w/npl | $29.00 |
| 21734 | Cplg, CFP-4C w/npl | $30.00 |
| 21735 | Cplg, CFP-6C w/npl | $31.00 |
| 21739 | Nipple, 1-1/4" x 16-1/2" | $22.00 |
| 21762 | Valve, inlet, S/King | $496.00 |
| 21764 | Valve, outlet, RMS500 | $378.00 |
| 21765 | Service kit, air motor pump, S/King | $286.00 |
| 21766 | Service kit, seals, air mtr pump, S/King | $109.00 |
| 21767 | Service kit, material pump, S/King | $243.00 |
| 21769 | Valve, pop-up, 4", S/King | $96.00 |
| 21773 | Auto-pulse kit, Pulsar | $1,722.00 |
| 21777 | CFC const flow conn w/belt, LP | $39.00 |
| 21789 | Grit valve stem washer | $22.00 |
| 21797 | Pulsar VI/VI-P steel grit kit, fact | $819.00 |
| 21798 | Pulsar VI/VI-P steel grit kit, field | $819.00 |
| 21801 | Recl, press, for Pulsar VI-P | $1,533.00 |
| 21810 | Alox kit 600S 1200 cfm, fac inst | CALL |
| 21811 | Alox kit 600P 1200 cfm, fac inst | CALL |
| 21812 | Alox kit 720S 1200 cfm, fac inst | CALL |
| 21813 | Alox kit 720P 1200 cfm, fac inst | CALL |
| 21823 | Recl, press, 900 cfm 24" w/o exh | $1,869.00 |
| 21830 | CAP-1 inlet filter media | $16.00 |
| 21831 | Gasket, outlet filter bowl, CAP-1 | $5.00 |
| 21832 | CAP-1 gauge, 1/4" NPT 0-30 psi | $50.00 |
| 21833 | CAP-1 relief valve | $44.00 |
| 21834 | CAP-1 disconnect, 3/8" NPT | $34.00 |
| 21835 | CAP-1 vanes (set of 4) | $118.00 |
| 21836 | CAP-1 inlet filter asmbly | $49.00 |
| 21837 | CAP-1 inlet, remote air 50ft | $351.00 |
| 21838 | CAP-1 remote air extn, 50 ft | $239.00 |
| 21839 | CAP-1 elevated air inlet kit | $35.00 |
| 21840 | B/Mach Contr Sys, 2 cf w/LP resp | CALL |
| 21841 | B/Mach Contr Sys, 4 cf w/LP resp | CALL |
| 21842 | B/Mach Contr Sys, 6 cf w/LP resp | CALL |
| 21845 | Bowl asmbly, MD, air filter (N) | $92.00 |
| 21846 | Bowl asmbly, AD, air filter (N) | $116.00 |
| 21850 | Door, vert lift, left, 220/Dbl 220 | CALL |
| 21852 | Door, vert lift, right, BNP 220/Dbl 220 | CALL |
| 21855 | Door, vert lift, left, 65/Dbl 65 | CALL |
| 21857 | Door, vert lift, right, BNP 65/Dbl 65 | CALL |
| 21879 | Door, vert lift, left, Pulsar III | CALL |
| 21890 | Door, vert lift, right, Pulsar III | CALL |
| 21917 | Door, vert lift, left, Pulsar VI/VI-P | CALL |
| 21922 | Door, vert lift, right, Pulsar VI/VI-P | CALL |
| 22000 | Cylinder w/mount kit, C/D module | CALL |
| 22046 | Cylinder, C/D module | CALL |
| 22077 | QTM thrd out flange, air valve | $72.00 |
| 22078 | QTM thrd inlet flange | $62.00 |
| 22079 | Conv kit HP to LP for APL 60 or 600 | $191.00 |
| 22080 | Conv kit LP to HP for APL 60 or 600 | $191.00 |
| 22081 | Helmet, APL 60LP less resp hose | $557.00 |
| 22082 | Helmet, APL 60LP w/50ft resp hose | $693.00 |
| 22089 | Recl mount flange, 24" mach | $338.00 |
| 22093 | Service kit, reg 12052, 1" PH | $46.00 |
| 22324 | Support, recl hose, 900 cfm 5" inlet | $164.00 |
| 22331 | Drum divider kit, 160 fact inst | $512.00 |
| 22332 | Drum divider kit, 160 field inst | $512.00 |
| 22336 | Cab BNP 65 900 DF, steel 230/3/60 | CALL |
| 22337 | Cab BNP 65P 900 DF, steel 230/3/60 | CALL |
| 22338 | Cab BNP 220S 900 DF, steel 230/3/60 | CALL |
| 22339 | Cab BNP 220P 900 DF, steel 230/3/60 | CALL |
| 22340 | Damper, 900 cfm 7" exh outlet | $317.00 |
| 22344 | Guide, outlet muffler, w/locknut | $10.00 |
| 22349 | O-ring, APL 60 | $0.70 |
| 22350 | Screw, 5/16 button head | $0.80 |
| 22351 | Washer, MLNM plunger tip | $2.00 |
| 22352 | Tip, plunger, MLNM | $4.00 |
| 22363 | Filter, air (MS), 1-1/2" MD (SMC) | $254.00 |
| 22364 | Filter, air (MS), 1-1/2" AD (SMC) | $296.00 |
| 22365 | Bowl asmbly, air filter (S), 1-1/2" MD | Disc |
| 22366 | Bowl asmbly, air filter (S), 1-1/2" AD | Disc |
| 22367 | Service kit, air filter (seals) (S) 1-1/2" | $82.00 |
| 22368 | Filter element, air filter (S), 1-1/2" AD/MD | $124.00 |
| 22369 | O-ring, air filter housing, (S),1-1/2"AD/MD | $9.00 |
| 22370 | O-ring, air filter bowl, (S), 1-1/2" AD/MD | $9.00 |
| 22371 | Gasket, air filter, (S), 1-1/2" AD/MD | $5.00 |
| 22373 | Curtain set black, BNP600, 12x19 window | $895.00 |
| 22374 | Curtain set black, BNP720, 12x19 window | $1,010.00 |
| 22375 | Adaptor, outlet, M-section, 900 cfm 6" | $275.00 |
| 22376 | Elbow, M-sect transition, 900 cfm 6" | $916.00 |
| 22377 | Wear plate, M-section, 900 cfm 6" | $114.00 |
| 22383 | Pump, ambient air, CAP-1 | $1,134.00 |
| 22384 | Pump, ambient air, CAP-4C w/cart | CALL |
| 22388 | Sntl seat kit, upper segment | $49.00 |
| 22389 | Sntl seal kit, lower segment | $19.00 |
| 22415 | Bowl asmbly, air filter (S), 1" MD | Disc |
| 22416 | Bowl asmbly, air filter (S), 1" AD | Disc |
| 22417 | Service kit, air filter (seals) (S) 1" | $44.00 |
| 22418 | Filter element, air filter (S), 1" AD/MD | $99.00 |
| 22419 | Baffle, air filter (S), 1" AD/MD | $5.00 |
| 22420 | O-ring, air filter bowl (S), 1" AD/MD | $3.00 |
| 22421 | Deflector, air filter (S), 1" AD/MD | $9.00 |
| 22422 | O-ring, air filter housing (S), 1"AD/MD | $3.00 |
| 22423 | Gasket, louver, air filter, 1" AD/MD | $2.00 |
| 22424 | Filter, air (MS), 1" MD (SMC) | $187.00 |
| 22425 | Filter, air (MS), 1" AD (SMC) | $218.00 |
| 22429 | QTM air valve seat retaining ring | $37.00 |
| 22433 | CAP-4 outlet filter less element | $76.00 |
| 22434 | Valve, relief, CAP-4 | $97.00 |
| 22438 | CAP-4 disconnect, 1/2" cl type | $52.00 |
| 22452 | CAP-4 inlet filter asmbly | $44.00 |
| 22502 | Filter element, HEPA 24" | $647.00 |
| 22505 | B/Mach S/King, dry, w/remotes only | CALL |
| 22508 | Pusher line (flex) rplcmt 1" x 21" | $51.00 |
| 22510 | Hose, LP helmet, 1/2" x 50 ft | $170.00 |
| 22529 | Fitting, 1-1/4" m-npt / 1-1/4" m-flare | $16.00 |
| 22530 | Pump, ambient air, CAP-4 w/frame | CALL |
| 22531 | Handle, 1" ball valve | $13.00 |
| 22532 | Handle, 1-1/4" ball valve | $13.00 |
| 22540 | Filter, breathing air, CPF 20 fact-inst, Contr mach | $257.00 |
| 22541 | B/Mach Contr, 4 cf 12v ACS | CALL |
| 22542 | B/Mach Contr, 6 cf 12v ACS | CALL |
| 22543 | B/Mach Contr, 4 cf 120v ACS | CALL |
| 22544 | B/Mach Contr, 6 cf 120v ACS | CALL |
| 22545 | B/Mach Contr, 4 cf pneu AQV | CALL |
| 22546 | B/Mach Contr, 6 cf pneu AQV | CALL |
| 22547 | B/Mach Contr, 4 cf 12v AQV | CALL |
| 22548 | B/Mach Contr, 6 cf 12v AQV | CALL |
| 22549 | B/Mach Contr, 4 cf 120v AQV | CALL |
| 22550 | B/Mach Contr, 6 cf 120v AQV | CALL |
| 22551 | Conv kit, MLNM ACS, 4 & 6 cf | $924.00 |
| 22552 | Accessory pkg, 20-inch diam machine 1-1/4" | $977.00 |
| 22553 | Accessory pkg, 24-inch diam machine 1-1/4" | $1,008.00 |
| 22554 | B/Mach Contr, 4 cf pneu ACS | CALL |
| 22555 | B/Mach Contr, 6 cf pneu ACS | CALL |
| 22556 | Filter cartr, polyester | $303.00 |
| 22562 | Valve body, 1/2" LMV | $80.00 |
| 22563 | Diaphr, 1/2" media valve, LMV | $99.00 |
| 22590 | Service kit, pulse valve 1-1/2", RP/Goyen only | $170.00 |
| 22591 | Service kit, pulse valve, 1", RP/Goyen only | $160.00 |
| 22600 | MLNM plunger, urethane tip | $76.00 |
| 22602 | MLNM dual piston | $103.00 |
| 22603 | MLNM upper sleeve | $72.00 |
| 22604 | MLNM spring, comp x 4" long | $9.00 |
| 22605 | Seal, MLNM plunger | $3.00 |
| 22606 | Seal, lower, MLNM dual piston | $5.00 |
| 22607 | Seal, upper, MLNM dual piston | $4.00 |
| 22608 | O-ring, MLNM, #241 | $2.50 |
| 22609 | O-ring, #206, MLNM/QTM | $2.00 |
| 22610 | Seal, MLNM cylinder cap | $3.00 |
| 22611 | Screw, skt hd, 5/16" x 1.25", MLNM/QTM | $0.80 |
| 22612 | MLNM inner sleeve | $50.00 |
| 22613 | MLNM piston | $33.00 |
| 22615 | Seal, piston, MLNM | $4.00 |
| 22616 | O-ring, MLNM, #337 | $2.00 |
| 22617 | MLNM o-ring, exh | $2.00 |
| 22618 | O-ring, MLNM, #326 | $2.00 |
| 22619 | QTM rear cover, rack & pinion | Disc |
| 22620 | QTM clean out cover | $20.00 |
| 22621 | QTM lower body | $54.00 |
| 22622 | QTM gasket | See 21322 |
| 22623 | O-ring, QTM | $2.00 |
| 22625 | Screw, skt hd, 5/16" x 5-1/2", QTM | Disc |
| 22627 | Retaining ring, 1/2" dia, QTM | Disc |
| 22628 | Key, woodruff, QTM | $0.90 |
| 22630 | Nut, 1/2" lock elastic thin | $0.90 |
| 22631 | QTM pinion shaft | Disc |
| 22634 | Screw, set, 10-24 x 3/8" | Disc |
| 22635 | QTM pinion shaft bushing | Disc |
| 22636 | Gasket, QTM shaft bushing | Disc |
| 22637 | Washer, 1/2" wave, QTM | Disc |
| 22638 | Washer, 1/2" flat SAE, QTM | Disc |
| 22647 | Gasket (liner), MLNM muffler asmbly | $3.00 |
| 22648 | MLNM diaphr | $17.00 |
| 22650 | MLNM screw w/int thrd for puller | $21.00 |
| 22651 | Screen, MLNM exh | $2.00 |
| 22653 | QTM handle | Disc |
| 22654 | MLNM muffler, exh housing | $12.00 |
| 22655 | Screw, 3/8" x 1" skt hd | $0.90 |
| 22656 | QTM strike | Disc |
| 22657 | QTM button shaft | Disc |
| 22658 | Spring, compression, QTM | $3.00 |
| 22661 | Key, pinion shaft, QTM | Disc |
| 22662 | QTM pinion gear w/set screw | Disc |
| 22670 | Light asmbly, 600/720 & BRms | See 24541 |
| 22673 | Alox kit Pulsar VI-P, field inst | $727.00 |
| 22677 | Recl, suct, for Pulsar VI | $1,932.00 |
| 22680 | Conv kit HP to LP for APL 20 | $191.00 |
| 22686 | Recl, press, 1200 cfm 24" w/o exh, n-mod | See 24062 |
| 22688 | Helmet APF 1000 kit | Disc |
| 22689 | Liner, 1200 cfm recl top plate | $349.00 |
| 22690 | Conv kit LP to HP for APL 20 | $191.00 |
| 22691 | Liner, 1200 cfm recl baffle & tube (pre Jan 2010) | $187.00 |
| 22692 | Liner, 1200 cfm recl body cyl, (pre Jan 2010) | $473.00 |
| 22693 | Liner, 1200 cfm recl inlet | $58.00 |
| 22694 | Liner, 1200 cfm recl sump | $359.00 |
| 22695 | Liner, 1800 cfm recl top plate | $506.00 |
| 22696 | Liner, 1800 cfm recl baffle | $282.00 |
| 22697 | Liner, 1800 cfm recl body cyl | $538.00 |
| 22698 | Liner, 1800 cfm recl inlet | $76.00 |
| 22699 | Liner, 1800 cfm recl sump | $412.00 |
| 22700 | Liner, 2500 cfm recl top plate | $546.00 |
| 22701 | Liner, 2500 cfm recl baffle | $359.00 |
| 22702 | Liner, 2500 cfm recl body cyl | $788.00 |
| 22703 | Liner, 2500 cfm recl inlet | $107.00 |
| 22704 | Liner, 2500 cfm recl sump | $445.00 |
| 22705 | Liner, 3600 cfm recl top plate | $729.00 |
| 22706 | Liner, 3600 cfm recl baffle | $399.00 |
| 22707 | Liner, 3600 cfm recl body cyl | $809.00 |
| 22708 | Liner, 3600 cfm recl inlet | $103.00 |
| 22709 | Liner, 3600 cfm recl sump | $466.00 |
| 22720 | Cab BNP162-1 w/300 recl/DF opt-elec | CALL |
| 22721 | Cab BNP162-3 w/600 recl/DF opt-elec | CALL |
| 22722 | Cab BNP162-4 w/600 recl/RP opt-elec | CALL |
| 22723 | Cab BNP164-1 w/600 recl/DF opt-elec | CALL |
| 22724 | Cab BNP164-4 w/600 recl/RP opt-elec | CALL |
| 22725 | Cab BNP164-3 w/900 recl/DF opt-elec | CALL |
| 22726 | Cab BNP164-5 w/900 recl/RP opt-elec | CALL |
| 22727 | Cab BNP166-1 w/900 recl/DF opt-elec | CALL |
| 22728 | Cab BNP166-2 w/900 recl/RP opt-elec | CALL |
| 22729 | Support, recl hose, 1200 cfm 6" inlet | $223.00 |
| 22730 | Liner, 600 cfm recl baffle | $114.00 |
| 22731 | Liner, 600 cfm recl body cyl | $323.00 |
| 22732 | Liner, 600 cfm recl sump | $355.00 |
| 22733 | Liner, 600 cfm recl top plate | $218.00 |
| 22735 | Valve, diaphr pulse, 1" | $226.00 |
| 22736 | Valve, diaphr pulse, 1 1/2" | $384.00 |
| 22747 | Cab Pulsar IX-S suction sys 230/3/60 | CALL |
| 22759 | Blower asmbly, 1200 cfm | CALL |
| 22760 | Valve, abr mtrg, auto Quantum grit less ftgs | $609.00 |
| 22761 | QTM housing, knob | $45.00 |
| 22762 | QTM housing, knob nut | $29.00 |
| 22763 | Metering plate & shaft, Quantum | $76.00 |
| 22764 | QTM metering screw | $51.00 |
| 22766 | QTM adjustment knob | $34.00 |
| 22767 | Screw, 5/16" x 3/4", QTM | $0.80 |
| 22772 | Operator staion asmbly, 600/720 | $651.00 |
| 22799 | Recl, press, 600 cfm 16" A pull-thru | $1,974.00 |
| 22800 | Recl, press, 900 cfm 16" A pull-thru | CALL |
| 22807 | Filter asmbly, HEPA, Pulsar III/VI | CALL |
| 22808 | Gasket, HEPA filter for Pulsar | $17.00 |
| 22811 | Breathing tube asmbly, helmet | $54.00 |
| 22815 | O-ring, breathing tube | $2.00 |
| 22820 | Disc, felt, QTM | $3.00 |
| 22824 | Service kit, for 01902, 01903, 01904 & 01906 | $82.00 |
| 22826 | Window frame, quick-change | $72.00 |
| 22827 | Liner, 900 cfm inlet top | $63.00 |
| 22834 | Recl, press, 1200 cfm 16" w/o exh, n-mod | See 24068 |
| 22841 | Conv kit, QTM-R to QTM-K | $210.00 |
| 22843 | Fitting, 3/8" male branch brass | $20.00 |
| 22845 | Valve, Quantum manual mtrg | $353.00 |
| 22848 | Conv kit, Sentinel fine to coarse | $65.00 |
| 22849 | Conv kit, Sentinel coarse to fine | $65.00 |
| 22854 | Service kit, QTM-K mtrg segment | $20.00 |
| 22856 | Service kit, MLNM inlet seals | $22.00 |
| 22857 | Service kit, MLNM outlet segment | $28.00 |
| 22859 | Service kit, RLX pneu cont handle | $20.00 |
| 22863 | Pusher line (flex) rplcmt, 1" x 22", P VI-P | $82.00 |
| 22864 | Pusher line (flex) rplcmt, 1" x 32", Aero&160s | $86.00 |
| 22865 | Gas, test (10 ppm CO) | $61.00 |
| 22866 | Banner, authorized distrib | $28.00 |
| 22867 | Banner | See 22866 |
| 22868 | Service kit, MLNM outlet muffler | $23.00 |
| 22892 | CMS-2 CO Monitor, instr only, 120v | $1,407.00 |
| 22893 | Calibr connector asmbly, CMS-2 | $187.00 |
| 22894 | CMS-2 CO Monitor Pkg w/conn & gas, 120v | $1,554.00 |
| 22898 | Service kit, MLNM plunger | $22.00 |
| 22899 | Service kit, MLNM super | $73.00 |
| 22903 | Consumables kit, 2cf Contr mach | $1,071.00 |
| 22904 | Consumables kit, 4cf Cont Mach | $1,092.00 |
| 22905 | Consumables kit, 6cf Cont Mach | $1,113.00 |
| 22906 | Service kit, Contr B/Machine | $502.00 |
| 22909 | Alarm, remote kit, CMS-1 & 2 | $575.00 |
| 22910 | Cable, CMS-1 & 2 remote alarm, 50ft | $164.00 |
| 22913 | Suit, blast, lightweight, S | $118.00 |
| 22914 | Suit, blast, lightweight, M | $118.00 |
| 22915 | Suit, blast, lightweight, L | $118.00 |
| 22916 | Suit, blast, lightweight, XL | $118.00 |
| 22917 | Suit, blast, lightweight, 2XL | $118.00 |
| 22919 | Sensor, CMS-2 | $97.00 |
| 22920 | Regulator/filter, CMS-2 | $76.00 |
| 22921 | Filter element, CMS-2 | $17.00 |
| 22922 | Horn with wire, CMS-1 & 2, 12vdc | $90.00 |
| 22923 | Light, alarm, CMS-2 | $118.00 |
| 22924 | Fitting, 1/4" OD, CMS-2 | $7.00 |
| 22933 | Tool, window installation stick | $3.00 |
| 22939 | Regulator, 3/8" NPT knob type | $64.00 |
| 22941 | Manifold, 5-way CPF-80 | $62.00 |
| 22947 | RP dust drum adaptor, 55 gal | $254.00 |
| 22979 | Conv kit, 02066 to Sentinel | $130.00 |
| 22984 | Strobe light, CMS remote alarm | $87.00 |
| 22985 | Horn, CMS remote alarm | $163.00 |
| 22986 | Adaptor, wiring, CMS remote alarm | $80.00 |
| 22987 | Stand asmbly for remote alarm | $92.00 |
| 22988 | Door set, BNP 600 left side | CALL |
| 22989 | Door set, BNP 720 left side | CALL |
| 22996 | Alox kit Pulsar IX-S, fact inst | $1,281.00 |
| 22997 | Alox kit Pulsar IX-P, fact inst | $1,250.00 |
| 22998 | Curtain set black, Pulsar IX | $1,061.00 |
| 22999 | Curtain set white, Pulsar IX | $1,596.00 |
| 23011 | Calibr connector asmbly, CMS-1 & ABL 4021 | $187.00 |
| 23012 | CMS-1 CO Monitor, instr only, wall-mt, 120v | $1,596.00 |
| 23013 | Regulator/filter, CO Monitors | $67.00 |
| 23014 | Filter element, CMS-1 | $19.00 |
| 23015 | Sensor, CMS-1 | $397.00 |
| 23017 | CMS-1 CO Monitor Pkg w/conn & gas, 120v | $1,701.00 |
| 23018 | Consumables kit, 1/2 cf Blast Mach | $761.00 |
| 23023 | Sight glass dome for 05616 | $78.00 |
| 23026 | Paint, champagne - gallon | $55.00 |
| 23028 | Wear plate, 1800 cfm, rbr-lined | $181.00 |
| 23029 | Wear plate, 2500 cfm, rbr-lined | $212.00 |
| 23030 | Vortex tube asmbly, CAT/CCT | $18.00 |
| 23032 | Paint, champagne - aerosol can | $18.00 |
| 23035 | Knob (each), cab window frame | $6.00 |
| 23038 | Window kit, 12.5x19.5, retro, qk-change | $114.00 |
| 23040 | Recl top, 900 cfm recl, modular | $300.00 |
| 23041 | Recl body, modular, 900 cfm | $1,035.00 |
| 23042 | Leg asmbly, modular recl sump, 900 cfm | $510.00 |
| 23043 | Sump adaptor, pressure 16" | $403.00 |
| 23046 | Vortex cyl, 900 cfm pull-thru, mod & P-IX | $510.00 |
| 23047 | Vortex cyl, 900 cfm exh mount, mod & P-IX | $586.00 |
| 23059 | Liner, recl top, 900 cfm | $261.00 |
| 23060 | Recl body, rbr-lined, 900 cfm | CALL |
| 23064 | Lenses, value-pack, 04361 (60 packs) | $520.00 |
| 23065 | Lenses, value-pack, 04367 (70 packs) | $420.00 |
| 23066 | Lenses, value-pack, 04372 (160 packs) | $990.00 |
| 23067 | Lenses, value-pack, 04373 (24 packs) | $475.00 |
| 23068 | Window glass, 12212 box of 100 | CALL |
| 23069 | Lenses, value-pack, 06190 (125 packs) | $855.00 |
| 23073 | Recl sump, Pulsar IX-S | $277.00 |
| 23097 | Nipple, hex, metering valve | $10.00 |
| 23098 | Screw, metering valve adjust | $2.00 |
| 23099 | Nut, lock, metering valve | $0.80 |
| 23100 | Hose, supa 3/4" ID bulk per foot | $7.00 |
| 23101 | Hose, supa blast 3/4" ID x 25ft | $124.00 |
| 23102 | Hose, supa blast 3/4" ID x 50ft | $248.00 |
| 23103 | Hose, sup blast 1" ID x 25ft | $124.00 |
| 23104 | Hose, supa blast 1" ID x 50ft | $248.00 |
| 23105 | Hose, supa blast 1-1/4" ID x 25ft | $124.00 |
| 23106 | Hose, supa blast 1-1/4" ID x 50ft | $248.00 |
| 23108 | Filter, coalescent, hi-volume, 800 cfm | $1,701.00 |
| 23110 | Contact, N/O, green | $30.00 |
| 23130 | Push button, green | $28.00 |
| 23131 | Contact, N/C, red | $30.00 |
| 23146 | Screen, recl, #4.5 mesh w/magnets | $212.00 |
| 23147 | Screen, recl, #8 mesh w/magnets | $212.00 |
| 23148 | Inlet, media air remote BNP & Pulsar | $202.00 |
| 23150 | Liner set, rubber, 600 cfm recl, non-mod | $1,239.00 |
| 23151 | Liner set, rubber, recl 900 cfm | $1,617.00 |
| 23152 | Liner set, rubber, 1200 cfm recl (bolt-on top only) | $1,701.00 |
| 23153 | Liner set, rubber, 1800 cfm recl (bolt-on top only) | CALL |
| 23154 | Liner set, rubber, 2500 cfm recl (bolt-on top only) | CALL |
| 23156 | Stack, air inlet 6" x 8" BNP/Pulsar | $145.00 |
| 23182 | B/Mach cab, Pulsar IX-P | CALL |
| 23203 | Door, right, Pulsar IX | $790.00 |
| 23204 | Door, left, Pulsar IX | $790.00 |
| 23218 | Grating, Pulsar IX (3 required) | $187.00 |
| 23232 | Lenses, for cab window 12213, 5-pk | $30.00 |
| 23233 | Gasket, sump pipe 6" Pulsar IX | $40.00 |
| 23250 | Cab Pulsar IX-P pressure sys 230/3/60 | CALL |
| 23251 | Light fixture, BNP & Pulsar w/o lens | See 24740 |
| 23252 | Light tube, fluorescent 20 watt | See 24741 |
| 23253 | Light fixture cover for 23255 fixture | $191.00 |
| 23255 | Light asmbly, w/cover, ceiling mnt | $517.00 |
| 23258 | Gasket, univ sump pipe 4" | $7.00 |
| 23259 | Gasket, univ sump pipe 5" | $7.00 |
| 23291 | Gasket, univ sump pipe 6" | $9.00 |
| 23295 | Sump pipe univ, 4" | $40.00 |
| 23296 | Sump pipe univ, 5" | $67.00 |
| 23297 | Sump pipe univ, 6" | $76.00 |
| 23355 | Gauge, differ press reclaim BNP & Pulsar | $599.00 |
| 23356 | Gauge, differ press DC BNP & Pulsar | $611.00 |
| 23399 | Lubricant, ball screw, dry | $128.00 |
| 23400 | Adaptor, outlet, M-section, 900 cfm 5" | $286.00 |
| 23411 | Dust drum asmbly, 3.5 gal | $166.00 |
| 23415 | Filter, in-line 1/4" OD tube | $67.00 |
| 23416 | Liner, recl, baffle & tube, 900 cfm | $223.00 |
| 23418 | Dust lid | See 23419 |
| 23419 | Dust lid & lock ring, Pulsar | $85.00 |
| 23422 | Door lock delay, two doors | See 24163 |
| 23423 | Door lock delay, one door | See 24164 |
| 23444 | Hose, blast 4 ply 1/2" ID x 25ft | $107.00 |
| 23445 | Hose, blast 4 ply 1/2" ID x 50ft | $214.00 |
| 23446 | Hose, blast 4 ply 3/4" ID x 25ft | $121.00 |
| 23447 | Hose, blast 4 ply 3/4" ID x 50ft | $242.00 |
| 23448 | Hose, blast 4 ply 1" ID x 50ft | $286.00 |
| 23449 | Hose, blast 4 ply 1" ID x 100ft | $571.00 |
| 23450 | Hose, blast 4 ply 1-1/4" ID x 50ft | $330.00 |
| 23451 | Hose, blast 4 ply 1-1/4" ID x 100ft | $666.00 |
| 23452 | Hose, blast 4 ply 1-1/2" ID x 50ft | $410.00 |
| 23453 | Hose, blast 4 ply 1-1/2" ID x 100ft | $819.00 |
| 23455 | Hose, blast 4 ply 1" ID x 25ft | $143.00 |
| 23460 | Nozzle, CXD-6, 3/8" orif, tc | $194.00 |
| 23461 | Nozzle, CXD-7, 7/16" orif, tc | $231.00 |
| 23462 | Nozzle, CXD-8, 1/2" orif, tc | $252.00 |
| 23477 | Conv kit, CPF-20 to CPF-80 | $126.00 |
| 23479 | Gasket, gun rack chamber | $32.00 |
| 23480 | Hose, supa blast 1" ID x 50ft cpld | $271.00 |
| 23481 | Hose, supa blast 1-1/4" ID x 50ft cpld | $271.00 |
| 23498 | Liner, cab sump - Pulsar VI-P | $546.00 |
| 23499 | Liner, cab sump - Pulsar VI | $546.00 |
| 23501 | Nozzle, TYP-3, 3/16" x 3-3/4" Contr | $118.00 |
| 23502 | Nozzle, TYP-4, 1/4" x 3-3/4" Contr | $118.00 |
| 23503 | Nozzle, TYP-5, 5/16" x 3-3/4" Contr | $118.00 |
| 23504 | Nozzle, TYP-6, 3/8" x 3-3/4" Contr | $118.00 |
| 23505 | Nozzle, TYP-7, 7/16" x 3-3/4" Contr | $118.00 |
| 23506 | Nozzle, TYP-8, 1/2" x 3-3/4" Contr | $118.00 |
| 23507 | Nozzle, TJP-3, 3/16" orif x 3-3/4" | $118.00 |
| 23508 | Nozzle, TJP-4, 1/4" orif x 3-3/4" | $118.00 |
| 23509 | Nozzle, TJP-5, 5/16" orif x 3-3/4" | $118.00 |
| 23510 | Nozzle, TJP-6, 3/8" orif x 3-3/4" | $118.00 |
| 23511 | Nozzle, TJP-7, 7/16" orif x 3-3/4" | $118.00 |
| 23512 | Nozzle, TJP-8, 1/2" orif x 3-3/4" | $118.00 |
| 23513 | Nozzle, TSP-3, 3/16" orif x 5-3/4" | $116.00 |
| 23514 | Nozzle, TSP-4, 1/4" orif x 6" | $121.00 |
| 23515 | Nozzle, TSP-5, 5/16" orif x 6-1/4" | $131.00 |
| 23516 | Nozzle, TSP-6, 3/8" orif x 6-3/4" | $158.00 |
| 23517 | Nozzle, TSP-7, 7/16" orif x 8" | $189.00 |
| 23518 | Nozzle, TSP-8, 1/2" orif x 8-1/2" | $247.00 |
| 23519 | Nozzle, TMP-3, 3/16" x 5-3/4" Contr | $116.00 |
| 23520 | Nozzle, TMP-4, 1/4" x 6" Contr | $121.00 |
| 23521 | Nozzle, TMP-5, 5/16" x 6-1/4" Contr | $131.00 |
| 23522 | Nozzle, TMP-6, 3/8" x 6-3/4" Contr | $158.00 |
| 23523 | Nozzle, TMP-7, 7/16" x 8" Contr | $189.00 |
| 23524 | Nozzle, TMP-8, 1/2" x 8-1/2" Contr | $247.00 |
| 23525 | Nozzle, TXP-6, 3/8" orif Contr | $194.00 |
| 23526 | Nozzle, TXP-7, 7/16" orif Contr | $231.00 |
| 23527 | Nozzle, TXP-8, 1/2" orif Contr | $252.00 |
| 23528 | Curtain set white, BNP600, 12x19 window | $1,470.00 |
| 23529 | Curtain set white, BNP720, 12x19 window | $1,680.00 |
| 23530 | Curtain set black, 55 cab | $294.00 |
| 23531 | Curtain set black, III/65 | $326.00 |
| 23532 | Curtain set black, VI/220 cab | $515.00 |
| 23533 | Curtain set black, Dbl 65 cab | $504.00 |
| 23534 | Curtain set black, Dbl 220 cab | $756.00 |
| 23540 | Curtain set white, 55 cab | $504.00 |
| 23541 | Curtain set white, III/65 cab | $567.00 |
| 23542 | Curtain set white, VI/220 cab | $861.00 |
| 23543 | Curtain set white, Dbl 65 cab | $819.00 |
| 23544 | Curtain set white, Dbl 220 cab | $1,281.00 |
| 23597 | MLNM exh adaptor plate | $51.00 |
| 23605 | Damper, 600 cfm 6" exh outlet | $311.00 |
| 23610 | Door, pass-thru, right, 65/Pulsar III | $798.00 |
| 23611 | Door, pass-thru, left, 65/Pulsar III | $798.00 |
| 23612 | Door, pass-thru, right, 220/Pulsar VI | $819.00 |
| 23613 | Door, pass-thru, left, 220/Pulsar VI | $819.00 |
| 23620 | Valve, inlet, MLNM (for JO eq) | $588.00 |
| 23625 | Filter, HEPA asmbly, 600 cfm | CALL |
| 23626 | Filter, HEPA asmbly, 900 cfm | CALL |
| 23627 | Filter, HEPA asmbly, 1200 cfm | CALL |
| 23643 | Hose, supa blast 1-1/4" ID x 100ft | $496.00 |
| 23648 | Paint, champagne - pint size discontinued | See 23026 & 23032 |
| 23661 | Motor starter | $193.00 |
| 23673 | Pusher line (flex) rplcmt 1" x 28", 3 & 6 cf | $51.00 |
| 23674 | Pusher line (flex) rplcmt 1-1/4" x 28", 2&3&6cf | $80.00 |
| 23675 | Pusher line (flex) rplcmt 1-1/4" x 31", 4&6cf contr | $86.00 |
| 23695 | Cover plate, CDF cartr | $50.00 |
| 23715 | Gasket, CDF door face | $35.00 |
| 23744 | Filter cartr, CDF, 13-3/4" x 26" | $202.00 |
| 23748 | Filter, coalescent, in-line 200 cfm | $555.00 |
| 23749 | Filter element, for 23748 in-line coalescent | $303.00 |
| 23750 | Hose, blast 2 br 1/2" ID x 25ft | $90.00 |
| 23751 | Hose, blast 2 br 1/2" ID x 50ft | $181.00 |
| 23752 | Hose, blast 2 br 3/4" ID x 25ft | $111.00 |
| 23753 | Hose, blast 2 br 3/4" ID x 50ft | $223.00 |
| 23754 | Hose, blast 2 br 1" ID x 25ft | $147.00 |
| 23755 | Hose, blast 2 br 1" ID x 50ft | $294.00 |
| 23756 | Hose, blast 2 br 1-1/4" ID x 50ft | $341.00 |
| 23757 | Filter cartr, Inex dust coll | $70.00 |
| 23766 | B/Mach Classic port, 3cf w/TLR100/Qtm | CALL |
| 23767 | B/Mach Classic port, 3cf, w/TLR300/Qtm | CALL |
| 23768 | B/Mach Classic port, 6cf w/TLR100/Qtm | CALL |
| 23769 | B/Mach Classic port, 6cf w/TLR300/Qtm | CALL |
| 23770 | Conditioner, cartr, 5 gal | $97.00 |
| 23771 | Conditioner, cartr, 23 lbs | $111.00 |
| 23801 | Strap, cape attachment, APL 600 | $43.00 |
| 23802 | Suspension - web type, APL 600 | $17.00 |
| 23804 | Fitting, APL 600 inlet | $2.00 |
| 23811 | Baffle, air, APL 600 | $4.00 |
| 23814 | Do-rag, Clemco | $13.00 |
| 23817 | Sweatband, APL 600 | $5.00 |
| 23818 | Cape, APL 600, silver-grey w/red in-collar | $85.00 |
| 23819 | Gasket, APL 600 window | $41.00 |
| 23825 | CCAC ClemCool air cond w/belt | $95.00 |
| 23829 | Swivel connector, 1/4 npt | $14.00 |
| 23869 | Solenoid for RP colls | $143.00 |
| 23870 | Timer board, 120v - 4-channel | See 10261 |
| 23871 | Timer board, 120v - 6-channel | $361.00 |
| 23872 | Timer board, 120v - 10 channel | $380.00 |
| 23873 | Pusher line kit (flex), 3 & 6 cf, 1" | $65.00 |
| 23874 | Pusher line kit (flex), 2, 3 & 6 cf, 1-1/4" | $97.00 |
| 23875 | Pusher line kit (flex), 2 cf, 1" | $55.00 |
| 23876 | Pusher line kit (flex), 4 & 6 cf, Contr | $97.00 |
| 23884 | Table/car, 40"/500#, rplcmnt | CALL |
| 23885 | Table/track, Pulsar IX 40"/500# | CALL |
| 23886 | Ear muffs for APL helmets w/web susp | $55.00 |
| 23889 | Stem asmbly, cab mtrg valve | $11.00 |
| 23890 | B/Mach Classic port, 0.5 cf package 1AA | CALL |
| 23891 | B/Mach Classic port, 1 cf package 2AA | CALL |
| 23892 | B/Mach Classic port, 2 cf package 3AA | CALL |
| 23893 | B/Mach Classic port, 3 cf package 4AA | CALL |
| 23894 | B/Mach Classic port, 3 cf package 5AA | CALL |
| 23895 | B/Mach Classic port, 6 cf package 6AA | CALL |
| 23896 | BClem sta, 60 cf less piping | CALL |
| 23897 | BClem yard, 60 cf less piping | CALL |
| 23898 | BClem hwy, 60 cf less piping | CALL |
| 23899 | BClem sta, 120 cf less piping | See 24628 |
| 23900 | BClem yard, 120 cf less piping | See 24629 |
| 23901 | BClem hwy, 120 cf less piping | See 24630 |
| 23902 | BClem sta, 160 cf less piping | See 24631 |
| 23903 | BClem yard, 160 cf less piping | See 24632 |
| 23904 | BClem hwy, 160 cf less piping | See 24633 |
| 23907 | B/Mach Classic port, 2 cf package 3ACS | CALL |
| 23908 | B/Mach Classic port, 3 cf package 4ACS | CALL |
| 23909 | B/Mach Classic port, 3 cf package 5ACS | CALL |
| 23910 | B/Mach Classic port, 6 cf package 6ACS | CALL |
| 23915 | Hose, exh, BNP pressure cabs | $97.00 |
| 23916 | Exhaust hose kit, Pulsar VI-P | $57.00 |
| 24000 | Lenses, outer, rect, APL 600, 35x25-pk | $280.00 |
| 24001 | Helmet, APL 600HP, w/CFC, less resp hose | $557.00 |
| 24002 | Helmet, APL 600HP, w/ACV, less resp hose | $588.00 |
| 24003 | Helmet, APL 600HP, w/CAT, less resp hose | $651.00 |
| 24004 | Helmet, APL 600HP, w/CCT, less resp hose | $698.00 |
| 24005 | Lenses, APL 600 outer, rect, non-perf, 25 pk | $15.00 |
| 24006 | Latch kit for APL 600 window | $7.00 |
| 24007 | Inlet fitting, APL 600 | See 23804 |
| 24008 | Strap holder kit, chin, w/fasteners | $5.00 |
| 24009 | Air baffle partition, helmet | See 23811 |
| 24010 | Helmet, APL 600LP, CFC less resp hose | $557.00 |
| 24011 | Helmet, APL 600LP, CFC w/ 50ft resp hose | $693.00 |
| 24012 | Window frame asmbly, APL 600 | $29.00 |
| 24021 | Light fixture glass, wire-reinf, for 24541 | $223.00 |
| 24029 | Dust coll sump, Pulsar VI | $416.00 |
| 24031 | Liner, inlet top, 1200 cfm recl | $70.00 |
| 24042 | Turntable, 40" dia 500# cap | $1,701.00 |
| 24044 | Valve, air, ACE 1-1/4" w/fittings | $349.00 |
| 24045 | Table/track, BNP 220/VI/VI-P - 30" | CALL |
| 24049 | Window kit, 20x30, retro, qk-change | $169.00 |
| 24051 | Recl, press, 1200 cfm 24", mod | CALL |
| 24058 | Recl, suct, 1200 cfm 5hp, mod | CALL |
| 24059 | Recl, suct, 1200 cfm, less exh, mod | CALL |
| 24060 | Recl, suct, 1200 cfm, mod | CALL |
| 24061 | Recl, press, 1200 cfm, 24" 5ph, mod | CALL |
| 24062 | Recl, press, 1200 cfm 24" w/o exh, mod | CALL |
| 24064 | Recl, press, 1200 cfm 16" 5hp, mod | CALL |
| 24065 | Recl, press, Aero, 1200 cfm 5hp, mod | CALL |
| 24066 | Recl, press, 1200 cfm 16", mod | CALL |
| 24067 | Recl, press, Aero, 1200 cfm, mod | CALL |
| 24068 | Recl, press, 1200 cfm 16" w/o exh, mod | CALL |
| 24074 | Valve, air, ACE 1-1/4" less fittings | $328.00 |
| 24075 | Service kit, ACE air valve | $65.00 |
| 24076 | Guide bushing, ACE valve | $43.00 |
| 24077 | Disc retainer, ACE valve | $27.00 |
| 24078 | Seat, ACE valve | $40.00 |
| 24079 | Disc plate, ACE valve | $30.00 |
| 24086 | Table/car, 30"/500#, 18" gauge, rplcmnt | $1,911.00 |
| 24089 | Cap, ACE valve | $61.00 |
| 24090 | Diaphr plate, ACE valve | $26.00 |
| 24091 | Valve body, ACE valve | $110.00 |
| 24092 | Stem, ACE valve | $49.00 |
| 24093 | Spring retainer gasket, ACE valve | $9.00 |
| 24094 | Spring retainer, ACE valve | $61.00 |
| 24095 | Spring, ACE valve | $80.00 |
| 24099 | Impeller for C-600 dust coll | $381.00 |
| 24163 | Door lock, time-delay, for 2-door 1-sta S cabs | CALL |
| 24164 | Door lock, time-delay, 1-door 600/720 cabs | $2,037.00 |
| 24167 | Pusher line (flex) rplcmt, 1" x 19", LPot | $55.00 |
| 24168 | Pusher line (flex) rplcmt, 1-1/4" x 19", LPot | $72.00 |
| 24191 | Tool, ACE guide bushing | $61.00 |
| 24192 | Tool, ACE seat removal | $61.00 |
| 24193 | Cab BNP 220P 900 RPH, 230/3/60 | CALL |
| 24194 | Accessory pkg, 16-inch mach 1" piping | $809.00 |
| 24195 | Accessory pkg, 16-inch mach 1-1/4" piping | $956.00 |
| 24196 | Accessory pkg, 24-inch mach 1" piping | $840.00 |
| 24198 | Solenoid, rplcmt for 15743 | $141.00 |
| 24201 | Suit, blast, leather/cotton, 2XL | $305.00 |
| 24202 | Suit, blast, leather/cotton, 3XL | $0.00 |
| 24204 | CAP-1 outlet filter asmbly | $78.00 |
| 24205 | Turntable w/workcar, 20"/500lb, rplcmnt | $1,428.00 |
| 24206 | Recl, press, 900 cfm 24" pull-thru | CALL |
| 24207 | Washers, NW-5 (10 pk) | $19.00 |
| 24210 | Helmet, APL 600HP, ACV, 50ft hose | $693.00 |
| 24211 | Helmet, APL 600HP, CAT, 50ft hose | $756.00 |
| 24212 | Helmet, APL 600HP, CCT, 50ft hose | $798.00 |
| 24213 | Helmet, APL 600HP, ACV, hose, CPF | $908.00 |
| 24214 | Helmet, APL 600HP, CAT, hose, CPF | $966.00 |
| 24215 | Helmet, APL 600HP, CCT, hose, CPF | $1,008.00 |
| 24420 | Recl mount flange, 16" machine | $357.00 |
| 24423 | Orifice, 0.004 purple, CMS-1 & 2 | $10.00 |
| 24424 | Orifice, 0.006 red, CMS-1 & 2 | $11.00 |
| 24427 | Pump, 1" diaphr, BNP250 | CALL |
| 24429 | Cab BNP 250 wetblast for aggr media | CALL |
| 24444 | Installation charge, A-300 Auto Kit | $1,450.00 |
| 24446 | Service kit, Quantum actuator | $40.00 |
| 24447 | Valve, abr mtrg, Quantum auto grit w/ftgs | $626.00 |
| 24472 | Union, urethane tubing | $7.00 |
| 24489 | Cylinder for 600/720 door | $1,743.00 |
| 24497 | Screw, socket hd cap, 10-32x1.5 | $1.00 |
| 24510 | Hose, HP helmet, 3/8" x 5 ft extn | $38.00 |
| 24540 | Light tube, fluorescent for 24541 | $7.00 |
| 24541 | Light asmbly, 600/720 & Blast Room | $962.00 |
| 24612 | CMS-3 Monitor Pkg w/conn & gas, 3v | $782.00 |
| 24613 | CMS-3 Monitor, instr only, in-resp, 3v | $504.00 |
| 24614 | Calibr connector asmbly, CMS-3 | $187.00 |
| 24615 | Calibr cap (connector), CMS-3 | $52.00 |
| 24616 | Sensor, CMS-3 | $194.00 |
| 24617 | Service kit, CMS-3 CO Monitor | $79.00 |
| 24619 | Battery, lithium, disposable, CMS-3 3v | $5.00 |
| 24621 | Pusher line (flex) rplcmt 3/4" x 11", 1028 | $38.00 |
| 24622 | Pusher line (flex) rplcmt 3/4" x 19", 1042 | $43.00 |
| 24623 | BClem sta, 160 cf 12v | CALL |
| 24624 | BClem yard, 160 cf 12v | CALL |
| 24625 | BClem hwy, 120 cf 12v | CALL |
| 24626 | BClem sta, 120 cf 12v | CALL |
| 24627 | BClem yard, 120 cf 12v | CALL |
| 24628 | BClem sta, 120 cf less piping | CALL |
| 24629 | BClem yard, 120 cf less piping | CALL |
| 24630 | BClem hwy, 120 cf less piping | CALL |
| 24631 | BClem sta, 160 cf less piping | CALL |
| 24632 | BClem yard, 160 cf less piping | CALL |
| 24633 | BClem hwy, 160 cf less piping | CALL |
| 24634 | Cab MediPulse 2342se | CALL |
| 24654 | Liner, 1200 cfm recl baffle & tube, (post Jan 2010) | $187.00 |
| 24655 | Velcro tape, Apollo 20 DLX, 2 feet | $2.00 |
| 24656 | Velcro tape, Apollo 600 DLX, 3 feet | $3.00 |
| 24659 | Blast room, preassembled, harsh media | CALL |
| 24687 | Power Gun w/hoses, hpr & cart, 30 ft hose | $1,460.00 |
| 24688 | Power Gun w/ hoses less hpr/cart, 30ft hose | $1,040.00 |
| 24689 | Suit, blast, lightweight, 4XL | $208.00 |
| 24692 | Qk disconnect, fem 1/4", sub for 00025 | $30.00 |
| 24740 | Light fixture (asmbly less cover) for 23255 | $397.00 |
| 24741 | Light tube, fluorescent for 24740 | $9.00 |
| 24742 | Cab BNP 260 wetblast for gl beads | CALL |
| 24743 | Cab BNP 260 wetblast for aggr media | CALL |
| 24744 | Mat, floor, anti-fatigue, rubber, 2ft x 3ft | $101.00 |
| 24745 | Cab Pulsar III-PE, pressure ergo sys | CALL |
| 24746 | Cab Pulsar III-P, pressure sys | CALL |
| 24747 | Cab Pulsar III-E, suction ergo sys | CALL |
| 24748 | Cab Bicarbonator soda, 23" x 42" wk chmbr | CALL |
| 24750 | Hose, blast 4-ply 3/4"ID x 100ft | $483.00 |
| 24761 | Conv kit, INEX 300 cfm reclaimer | $2,016.00 |
| 24771 | Helmet, APL 600HP, CFC, 50ft hose | $662.00 |
| 24772 | Helmet, APL 600HP, CFC, hose, CPF | $866.00 |
| 24773 | Suspension clips, APL 600, 4-pk | $7.00 |
| 24774 | B/Mach Aerolyte Pool Pal 1cf w/Rem & AF | CALL |
| 24775 | B/Mach Aerolyte Pool Pal 1cf compl pkg | CALL |
| 24776 | Level sensor well (switch protector) | $181.00 |
| 24778 | Hose, material, bulk per foot (max 16 ft) | $9.00 |
| 24779 | Hose, air, bulk, per foot (max 16 ft) | $7.00 |
| 24780 | Clamp, material hose | $3.00 |
| 24782 | Liner set, rubber, recl Pulsar III-P/VI/VI-P | $1,491.00 |
| 24783 | Upchg: 60 degree cone bl mach & M-sections | $1,155.00 |
| 24784 | Cab BNP 65P 600 RPH, 115/1/60 | CALL |
| 24785 | Cab BNP 220S 600 RPH, 115/1/60 | CALL |
| 24786 | Door, moved to left side BNP600 | $300.00 |
| 24787 | Door, vertical lift, air-powered BNP600 | CALL |
| 24788 | Door, moved to left side BNP720 | $300.00 |
| 24789 | Door, vertical lift, air-powered BNP720 | CALL |
| 24790 | Cab Aerolyte PRH 3636A | CALL |
| 24791 | Cab Aerolyte PRH 4050A RPH | CALL |
| 24792 | Cab Aerolyte PRH 3672A RPH | CALL |
| 24793 | Cab BNP162-4 600 RPH std-elec | CALL |
| 24794 | Cab BNP164-4 600 RPH std-elec | CALL |
| 24795 | Cab BNP164-5 900 RPH std-elec | CALL |
| 24796 | Cab BNP166-2 900 RPH std-elec | CALL |
| 24797 | Air blowdown, timed, t/barrel option | CALL |
| 24798 | Cab BNP 220S 600 RPH 3-ph | CALL |
| 24800 | Rem control handle, Pool Pal | $111.00 |
| 24803 | Valve, inlet 1/2-in, Pool Pal | $172.00 |
| 24807 | Filter, air w/air contrl, Pool Pal | $651.00 |
| 24809 | Valve, control handle, Pool Pal remote sys | $86.00 |
| 24811 | Conv kit, Apollo 600LP to 600HP | See 22080 |
| 24812 | Conv kit, Apollo 600HP to 600LP | See 22079 |
| 24816 | Regulator, 2" non-relieving | $998.00 |
| 24819 | Cab BNP162-4 600 RPH opt-elec | CALL |
| 24821 | Cab BNP164-4 600 RPH opt-elec | CALL |
| 24822 | Cab BNP164-5 900 RPH opt-elec | CALL |
| 24823 | Cab BNP166-2 900 RPH opt-elec | CALL |
| 24830 | Gauge, photohelic, field inst | $1,304.00 |
| 24841 | Table/worktray, 500 lb cap, for BNP 55 | CALL |
| 24842 | RLX electric switch w/cord | $41.00 |
| 24853 | Cab Pulsar VI-PE pressure ergo sys | CALL |
| 24854 | Vest, comfort, less conditioning device | $184.00 |
| 24855 | Vest, comfort with CAT | See 25266 |
| 24856 | Vest, comfort with CCT | $331.00 |
| 24858 | Service kit, comfort vest air fittings | $10.00 |
| 24860 | Gauge, photohelic | $580.00 |
| 24861 | Service kit, FlatTrak prm cylinder, Miller | $325.00 |
| 24862 | Service kit, cross drive cylinder, Miller | $479.00 |
| 24863 | B/Mach Aerolyte Pool Pal 2cf compl pkg | Disc |
| 24864 | B/Mach Aerolyte Pool Pal 2cf w/Rem & AF | Disc |
| 24885 | Noise-reduction arm port covers | $330.00 |
| 24886 | Power module asmbly, Pulsar VI-P | CALL |
| 24887 | Tube, rplcmnt, Tube-o-matic valve | $83.00 |
| 24890 | Service kit, piston seal, Miller | $91.00 |
| 24900 | Arm rest for all std BNPs, Pulsars, Aero cabs | $567.00 |
| 24930 | Helmet, APL 60HP w/ ClemCool, less resp hose | $599.00 |
| 24931 | Helmet, APL 60HP w/ ClemCool & 50 ft hose | $704.00 |
| 24932 | Helmet, APL 600HP, w/CCAC, less resp hose | $599.00 |
| 24933 | Helmet, APL 600HP, CCAC, 50ft hose | $756.00 |
| 24935 | Helmet, APL 60HP w/ ClemCool, 50ft hose & CPF | $914.00 |
| 24942 | Window packaging for 1 ea 12212 | $7.00 |
| 24943 | Lenses, intermed, APL600/60, 5-pk | $7.00 |
| 24985 | Tool, laser alignment, for #5 auto gun | $263.00 |
| 24986 | Tool, laser alignment, for #6 auto gun | $263.00 |
| 24987 | Cap, baseball, Clemco Ind Corp logo | $8.00 |
| 24989 | Hose connection kit, comfort vest, incl hose & fittings | $147.00 |
| 24990 | Commun Sys, WiComm-50 2-way radio set | $546.00 |
| 24991 | Commun Sys, WiComm-Pro set less radio | $441.00 |
| 24995 | Radio, WiComm-50 2-way only (pair) | $80.00 |
| 24996 | Holster, WiComm | $38.00 |
| 24999 | Commun Sys, WiComm-Pro 2-way set (1 op) | $1,239.00 |
| 25000 | Headset, ultralightweight, WiComm | $99.00 |
| 25001 | Switch, PTT, WiComm-50 radio | $378.00 |
| 25002 | Switch, PTT, WiComm-Pro radio | $378.00 |
| 25003 | Commun Sys, WiComm set w/o radio, cust radios | CALL |
| 25010 | Recl, press, 1800 cfm 24" w/o exh | CALL |
| 25019 | Cab Pulsar VI-E suction ergo sys 115/1/60 | CALL |
| 25020 | Lenses, perf outer, 25-pk, APL 60 (old 04361) | $22.00 |
| 25021 | Lenses, value-pack 25020 (60 packs) | $720.00 |
| 25022 | Suit, blast, lightweight, 3XL | $147.00 |
| 25024 | CMS-2 CO Monitor Pkg w/conn & gas, 12v | $1,554.00 |
| 25030 | Cab BNP 220SE 600 DF, 115/1/60 | CALL |
| 25031 | Cab BNP 220SE 600 RPC, 115/1/60 | CALL |
| 25032 | Cab BNP 220SE 600 RPC, 230/3/60 | CALL |
| 25033 | Cab BNP 220SE 600 RPH, 115/1/60 | CALL |
| 25034 | Cab BNP 220PE 900 DF, 230/3/60 | CALL |
| 25035 | Cab BNP 220SE 900 DF, steel 230/3/60 | CALL |
| 25036 | Cab BNP 220PE 900 DF, steel 230/3/60 | CALL |
| 25037 | Cab BNP 220SE 900 RPC, 230/3/60 | CALL |
| 25038 | Cab BNP 220SE 900 RPH, 230/3/60 | CALL |
| 25039 | Cab BNP 220PE 900 DF, 230/3/60 | CALL |
| 25040 | Cab BNP 220PE 900 RPH, 230/3/60 | CALL |
| 25041 | Cab Aerolyte ergo EPCN 4050A RP | CALL |
| 25042 | Cab Aerolyte ergo EPRN 4050A RP | CALL |
| 25043 | Cab Aerolyte ergo EPRH 4050A RPH | CALL |
| 25044 | Cab BNP 65E 300 DB, 115/1/60 | CALL |
| 25045 | Cab BNP 65E 300 DF, 115/1/60 | CALL |
| 25046 | Cab BNP 65E 600 DB, 115/1/60 | CALL |
| 25047 | Cab BNP 65E 600 DB, 230/3/60 | CALL |
| 25048 | Cab BNP 65E 600 DF, 115/1/60 | CALL |
| 25049 | Cab BNP 65E 600 DF, 230/3/60 | CALL |
| 25050 | Cab BNP 65E 600 RP, 115/1/60 | CALL |
| 25051 | Cab BNP 65E 600 RP, 230/3/60 | CALL |
| 25052 | Cab BNP 65PE 600 DF, 115/1/60 | CALL |
| 25053 | Cab BNP 65PE 600 RPC, 115/1/60 | CALL |
| 25054 | Cab BNP 65E 900 DF, steel 230/3/60 | CALL |
| 25055 | Cab BNP 65PE 900 DF, steel 230/3/60 | CALL |
| 25056 | Cab BNP 65PE 600 RPH, 115/1/60 | CALL |
| 25057 | Cab Aerolyte ergo EPCS 3636A DF | CALL |
| 25058 | Cab Aerolyte ergo EPRS 3636A RP | CALL |
| 25059 | Cab Aerolyte ergo EPRH 3636A RPH | CALL |
| 25061 | Cab BNP 220PE 900 RPC, 230/3/60 | CALL |
| 25062 | Cab BNP 220SE 600 DF, 230/3/60 | CALL |
| 25063 | Cab BNP 220SE 600 RPH, 230/3/60 | CALL |
| 25065 | Inlet plate asmbly, rbr-lined, 5", for 600 reclaimer | $294.00 |
| 25066 | Accessory pkg, 30-inch diam machines | $1,166.00 |
| 25067 | Accessory pkg, 36-inch diam machines | $1,586.00 |
| 25069 | Accessory pkg, Big Clem (for 1 op) | $609.00 |
| 25070 | SpinBlast HD, w/air-motor, for 18" to 48" pipe | CALL |
| 25071 | Wear plate, bolt-on top recl, 900 cfm | $90.00 |
| 25072 | CMS-2 CO Monitor, instr only, portable, 12v | $1,407.00 |
| 25073 | Alox kit 65SE 300/600/III-SE, fac inst | $651.00 |
| 25074 | Alox kit 65PE 600/900 /III ergo, fac inst | $546.00 |
| 25075 | Alox kit 220SE/VI-SE, ergo, fac inst | $546.00 |
| 25076 | Alox kit 220PE 900/VI-PE ergo, fac inst | $651.00 |
| 25077 | HB deflection tip, composite | $386.00 |
| 25084 | Adaptor, 1/2" npt x 3/4 jic, for 3/4 flex p-line | $9.00 |
| 25085 | Filter cartr, Bicarbonator, 9.214 x 26 | $194.00 |
| 25086 | Curtain set black, 65E / III-E ergo | $378.00 |
| 25087 | Curtain set black, VI/220 ergo cabs | $504.00 |
| 25088 | Curtain set white, 65 / III ergo models | $609.00 |
| 25089 | Curtain set white, VI/220 ergo cab | $735.00 |
| 25100 | SpinBlast HD blast head | $756.00 |
| 25101 | SpinBlast HD blast head lock ring | $135.00 |
| 25102 | SpinBlast HD main body bushing | $376.00 |
| 25103 | SpinBlast HD bushing lock ring | $143.00 |
| 25104 | SpinBlast HD packing gasket gland, set of 3 | $101.00 |
| 25105 | SpinBlast HD seal gland | $331.00 |
| 25106 | SpinBlast HD seal | $40.00 |
| 25107 | SpinBlast HD gland o-ring, outer | $12.00 |
| 25108 | SpinBlast HD gland o-ring, inner | $12.00 |
| 25109 | SpinBlast HD lock ring | $131.00 |
| 25110 | SpinBlast HD bearing, set of 2 | $223.00 |
| 25111 | SpinBlast HD spacer sleeve | $143.00 |
| 25112 | SpinBlast HD body | $1,024.00 |
| 25113 | SpinBlast HD tube | $971.00 |
| 25114 | SpinBlast HD air motor & gear asmbly | $1,286.00 |
| 25116 | SpinBlast HD air motor mounts, set of 4 | $311.00 |
| 25117 | SpinBlast HD carriage asmbly | $1,250.00 |
| 25118 | SpinBlast HD nozzle extension, set of 2 | $551.00 |
| 25119 | SpinBlast HD motor/gear service kit | $116.00 |
| 25129 | SpinBlast HD less carriage | CALL |
| 25130 | Service kit, air motor & gear | $131.00 |
| 25157 | Cab Pulsar III-S w-VI power module | CALL |
| 25158 | Filter cartr, MB9 | $464.00 |
| 25160 | Pulsar IX/IX-P steel grit kit, fact | $1,239.00 |
| 25161 | Metering valve kit, BNP, parts unassmbld | $40.00 |
| 25181 | DLX pad, top, APL600 | $17.00 |
| 25182 | DLX pad, middle - for APL20 & 600 | $20.00 |
| 25183 | DLX pad, side -black/grey, most head sizes | $34.00 |
| 25184 | DLX web, APL600 | $9.00 |
| 25185 | DLX Velcro tape, per ft (2'-APL20, 3'-APL600) | See 24655 or 24656 |
| 25187 | DLX pad, side -black/blue, sm head sizes | $34.00 |
| 25189 | DLX kit for APL600 | $101.00 |
| 25190 | Helmet, APL 600HP DLX, w/CFC, less resp hose | $557.00 |
| 25191 | Helmet, APL 600HP DLX, w/ACV, less resp hose | $588.00 |
| 25192 | Helmet, APL 600HP DLX, w/CAT, less resp hose | $651.00 |
| 25193 | Helmet, APL 600HP DLX, w/CCT, less resp hose | $698.00 |
| 25194 | Helmet, APL 600HP DLX, w/CCAC, less resp hose | $599.00 |
| 25195 | Helmet, APL 600LP DLX, CFC, less resp hose | $557.00 |
| 25200 | Helmet, APL 600HP DLX, CFC, 50ft hose | $662.00 |
| 25201 | Helmet, APL 600HP DLX, CFC, hose, CPF | $866.00 |
| 25202 | Helmet, APL 600HP DLX, ACV, 50ft hose | $693.00 |
| 25203 | Helmet, APL 600HP DLX, ACV, hose, CPF | $908.00 |
| 25204 | Helmet, APL 600HP DLX, CAT, 50ft hose | $756.00 |
| 25205 | Helmet, APL 600HP DLX, CAT, hose, CPF | $966.00 |
| 25206 | Helmet, APL 600HP DLX, CCT, 50ft hose | $798.00 |
| 25207 | Helmet, APL 600HP DLX, CCT, hose, CPF | $1,008.00 |
| 25208 | Helmet, APL 600HP DLX, CCAC, 50ft hose | $704.00 |
| 25209 | Helmet, APL 600HP DLX, CCAC, hose, CPF | $914.00 |
| 25210 | Helmet, APL 600LP DLX, CFC, 50ft hose | $693.00 |
| 25215 | DLX kit for APL20 | $55.00 |
| 25216 | DLX pad, top, APL20 | $17.00 |
| 25218 | DLX pad, side, APL20 | $34.00 |
| 25219 | DLX web, APL20 | $9.00 |
| 25251 | Axle, Pool Pal | $31.00 |
| 25252 | Pulsar IX/IX-P steel grit kit, field | $1,239.00 |
| 25255 | Holster, WiComm-Pro radio | $34.00 |
| 25257 | Bushing, flanged (order 2 per wheel) | $11.00 |
| 25258 | Leg extension, Pool Pal | $31.00 |
| 25266 | Vest, comfort with Clem-Cool air cond | $226.00 |
| 25277 | Trap, water, 16" for B-Clem 150PSI | $1,764.00 |
| 25299 | Helmet, APL 600HP, CCAC, hose, CPF | $914.00 |
| 25300 | Light fixt, 32w fluor 48", Glbl | $609.00 |
| 25301 | Light fixt frame w/glass, 48" Glbl | $191.00 |
| 25397 | Curtain set black, BNP600, 20x30 window | $895.00 |
| 25398 | Curtain set white, BNP600, 20x30 window | $1,470.00 |
| 25399 | Alox kit 600P 900 12x19 window | CALL |
| 25400 | Alox kit 600S 900 12x19 window | CALL |
| 25401 | Alox kit 600P 1200 12x19 window | CALL |
| 25402 | Alox kit 600S 1200 12x19 window | CALL |
| 25403 | Curtain set black, BNP720, 20x30 window | $1,010.00 |
| 25404 | Curtain set white, BNP720, 20x30 window | $1,680.00 |
| 25405 | Alox kit 720P 900 12x19 window | CALL |
| 25406 | Alox kit 720S 900 12x19 window | CALL |
| 25407 | Alox kit 720S 1200 12x19 window | CALL |
| 25408 | Alox kit 720P 1200 12x19 window | CALL |
| 25417 | Service kit, reg 10985/12051 Watts | $231.00 |
| 25432 | Vortex cyl, pull-thru, 1200 cfm recl | $620.00 |
| 25434 | Vortex cyl, push-thru, 1200 cfm recl | $725.00 |
| 25436 | Liner, 1200 cfm recl body cyl (post Jan 2010) | $473.00 |
| 25439 | Liner set, rubber, 1200 cfm recl (bolt top & sump) | $1,701.00 |
| 25444 | Service kit, pump, CAP-4 | $258.00 |
| 25445 | Service kit, motor, CAP-4 | $303.00 |
| 25472 | Battery, rechargeable for 21690 radio | $155.00 |
| 25473 | Gear reducer, 20:1 flange-mt | CALL |
| 25531 | CMS-2 Monitor Pkg w/conn & gas, 220v | $1,628.00 |
| 25532 | CMS-2 Monitor, instr only, portable, 220v | $1,481.00 |
| 25556 | Pusher line (flex) rplcmt, 1-1/4 x 18 | $82.00 |
| 25557 | Pusher line (flex) rplcmnt, 1-1/4 x 13.5 | $76.00 |
| 25558 | Door lock time-delay (Dbl suction cabs) | CALL |
| 25589 | Hopper & lid, Power Gun | $441.00 |
| 25591 | Cart asmbly, Power Gun | $221.00 |
| 25741 | BClem hwy, 160 cf pneu | CALL |
| 25742 | BClem yard, 160 cf pneu | CALL |
| 25743 | BClem sta, 160 cf pneu | CALL |
| 25744 | BClem hwy, 120 cf pneu | CALL |
| 25745 | BClem yard, 120 cf pneu | CALL |
| 25746 | BClem sta, 120 cf pneu | CALL |
| 25783 | Valve, union ball, 1-1/4" | $128.00 |
| 25802 | BClem hwy, 160 cf electric | CALL |
| 25821 | Headset, hanger-style, WiComm, fits DLX | $99.00 |
| 25822 | Radio, WiComm-Pro, instrins safe | CALL |
| 25823 | Retainer, radio accessory, WiComm | CALL |
| 25824 | Switch, PTT, WiComm-Pro, intrins safe | CALL |
| 25825 | Battery w/charger, WiComm-Pro, intr safe | CALL |
| 25826 | Commun Sys, WiComm-Pro set, intrins safe | CALL |
| 25826 | Commun Sys, WiComm-Pro, intrins-safe | CALL |
| 25838 | Microphone, throat w/speaker, universal | $236.00 |
| 90041 | Nut, APL 20 lens frame | $0.70 |
| 90196 | Diaphr for S/King media valve | See 22563 |
| 90208 | Power Gun grip & trigger asmbly | $184.00 |
| 90209 | Nozzle, Power Gun | $181.00 |
| 90213 | Air jet, Power Gun | $82.00 |
| 90214 | Lance, Power Gun | $218.00 |
| 90253 | Power Gun w/ hoses less hpr/cart, 16 ft hose | $998.00 |
| 90295 | Screw, APL 20 lens frame | $2.00 |
| 90366 | Power Gun mixing chamber | $155.00 |
| 90584 | Power Gun control knob | $34.00 |
| 90585 | Power Gun knob stem bushing | $18.00 |
| 90586 | Retaining nut, Power Gun contr knob | $7.00 |
| 90587 | Power Gun control knob stem | $13.00 |
| 90588 | Screw, Power Gun stem stop | $9.00 |
| 90589 | Spring, Power Gun control knob | $10.00 |
| 90590 | Power Gun return spring | $10.00 |
| 90591 | Power Gun rod guide | $21.00 |
| 90592 | Screw, set, Power Gun rod guide | $7.00 |
| 90593 | Power Gun rod and seal plug | $11.00 |
| 90594 | Power Gun rod & tip asmbly | $24.00 |
| 90595 | Power Gun rod seal | $14.00 |
| 90901 | Orbiter I w/gun for 6 ft long pipe | CALL |
| 90902 | Orbiter III w/gun for 6 ft long pipe | CALL |
| 90924 | OBT air control asmbly | CALL |
| 90925 | OBT air control hose, 10 ft | CALL |
| 90926 | OBT air control hose, 16 ft | CALL |
| 90927 | OBT air control hose, 32 ft | CALL |
| 90931 | OBT three-way valve | $219.00 |
| 90932 | OBT hex npl | $11.00 |
| 90933 | OBT gauge | $288.00 |
| 90934 | OBT air regulator | $475.00 |
| 90935 | OBT connection | $89.00 |
| 90936 | OBT bushing | $84.00 |
| 90937 | OBT coupling | $107.00 |
| 90938 | OBT knob | $258.00 |
| 90939 | OBT bracket | $455.00 |
| 90940 | OBT bolt | $11.00 |
| 90941 | OBT silencer | $54.00 |
| 90959 | OBT III hub nut | $126.00 |
| 90960 | OBT III front head | $280.00 |
| 90961 | OBT III rear head | $310.00 |
| 90962 | OBT III hub | $142.00 |
| 90963 | OBT III flange | $228.00 |
| 90966 | OBT III motor housing | $1,100.00 |
| 90969 | OBT III o-ring, 79.5 x 30 | $14.00 |
| 90970 | OBT III o-ring, 44.2 x 30 | $12.00 |
| 90973 | OBT III cylinder | $63.00 |
| 90975 | OBT III cover | $595.00 |
| 90976 | OBT III o-ring, 12.1 x 1.6 | $6.00 |
| 90978 | OBT III nut | $5.00 |
| 90979 | OBT III piston | $31.00 |
| 90980 | OBT III piston rod | $42.00 |
| 90981 | OBT III rod | CALL |
| 90982 | OBT III tie rod nut | $42.00 |
| 90983 | OBT III pin | $6.00 |
| 90984 | OBT rear leg socket | $216.00 |
| 91023 | Washer, nozzle | See 91024 |
| 91024 | Washers, NW-25 (10 pk) | $17.00 |
| 91026 | Washers, NW-32 (10 pk) | $20.00 |
| 92026 | Nozzle, TXR-6 | See 23525 |
| 92027 | Nozzle, TXR-7 | See 23526 |
| 92028 | Nozzle, TXR-8 | See 23527 |
| 93008 | OBG cap screw | $47.00 |
| 93009 | OBG gasket | $11.00 |
| 93010 | OBG valve seat | $200.00 |
| 93011 | OBG gasket | $10.00 |
| 93012 | OBG needle valve | $102.00 |
| 93013 | OBG inset | $188.00 |
| 93014 | OBG gasket | $21.00 |
| 93015 | OBG packing (5 pk) | $54.00 |
| 93016 | OBG packing screw | $28.00 |
| 93017 | OBG gasket | $14.00 |
| 93018 | OBG nut | $21.00 |
| 93019 | OBT gun body | $311.00 |
| 93020 | OBG threaded pin | $11.00 |
| 93021 | OBG pressure plug | $15.00 |
| 93022 | OBG guide sleeve | $72.00 |
| 93024 | OBG spring | $17.00 |
| 93025 | OBG closure screw | $33.00 |
| 93027 | OBG screw | $10.00 |
| 93028 | OBG trigger guard | $56.00 |
| 93029 | OBG gasket | $16.00 |
| 93030 | OBG safety lever | $19.00 |
| 93031 | OBG washer | $9.00 |
| 93032 | OBG trigger screw | $9.00 |
| 93054 | OBT hi-pressure paint hose, 11 ft | $61.00 |
| 93056 | OBT hi-pressure paint hose, 18 ft | $112.00 |
| 93057 | OBT hi-pressure paint hose, 34 ft | $154.00 |
| 93060 | OBT I wheel | $26.00 |
| 93063 | Orbiter I less hoses and gun | CALL |
| 93064 | OBT I hub | $126.00 |
| 93065 | OBT I impeller | $332.00 |
| 93066 | OBT I cage spacer | $376.00 |
| 93067 | OBT I motor end | $699.00 |
| 93068 | OBT locking screw | CALL |
| 93069 | OBT I air motor | CALL |
| 93070 | OBT I air motor tube | $350.00 |
| 93071 | OBT I set screw | CALL |
| 93072 | OBT I cylinder | CALL |
| 93073 | OBT I o-ring, 34.2 x 3.0 | $10.00 |
| 93074 | OBT I coupling | CALL |
| 93075 | OBT I o-ring, 34.2 x 3.0 | $9.00 |
| 93076 | OBT I strainer housing | $398.00 |
| 93077 | OBT I strainer | $28.00 |
| 93078 | OBT spray tip, .026 orifice | $310.00 |
| 93079 | OBT I paint tube | $79.00 |
| 93081 | OBT I leg pin | $6.00 |
| 93082 | OBT I leg bearing | $11.00 |
| 93083 | OBT I screw | $7.00 |
| 93084 | OBT I wheel shaft | $9.00 |
| 93086 | OBT gasket | $11.00 |
| 93087 | OBT double npl | $61.00 |
| 93088 | OBT trigger | $44.00 |
| 93089 | OBT handle | $16.00 |
| 93090 | OBT sleeve | $75.00 |
| 93091 | OBT threaded pin | $10.00 |
| 93092 | OBT threaded pin | CALL |
| 93093 | OBT III rod nut washer | $5.00 |
| 93095 | OBT III screw | $5.00 |
| 93100 | OBT III air tube 12" (305mm) | CALL |
| 93102 | OBT III air tube 11.34" (288mm) | $200.00 |
| 93104 | OBT III air tube 5.91" (150mm) | $165.00 |
| 93130 | OBG paint spray gun complete | $683.00 |
| 93131 | OBG air control gun asmbly | CALL |
| 93133 | Orbiter III less hoses and gun | CALL |
| 93193 | OBT trigger axle | $33.00 |
| 93194 | OBT shoulder screw | $10.00 |
| 93195 | OBT elastic ring | $9.00 |
| 93196 | OBT extraction ring | $21.00 |
| 93250 | OBT spray tip, .018" orifice | $310.00 |
| 93251 | OBT spray tip, .021" orifice | $310.00 |
| 93252 | OBT spray tip, .031" orifice | $310.00 |
| 93253 | OBT spray tip, .036" orifice | $310.00 |
| 93254 | OBT spray tip, .043" orifice | $310.00 |
| 93255 | OBT III air motor snap ring | Disc |
| 93256 | OBT III air motor key | Disc |
| 93257 | OBT III o-ring, 37.1 x 1.6 | $13.00 |
| 93258 | OBT III o-ring, 20.22 x 3.53 | $9.00 |
| 93259 | OBT III o-ring, 7.1 x 1.6 | $5.00 |
| 93260 | OBT III air motor complete | CALL |
| 93261 | OBT III felt ring | Disc |
| 93262 | OBT III casing | Disc |
| 93263 | OBT III air motor needle bearing | Disc |
| 93264 | OBT III air motor rear spacer | Disc |
| 93265 | OBT III air motor front bearing | Disc |
| 93266 | OBT III air motor spacer | Disc |
| 93267 | OBT III air motor spindle bearing | Disc |
| 93268 | OBT III air motor spindle | Disc |
| 93269 | OBT III air motor cylinder setter | Disc |
| 93270 | OBT III air motor rotor bearing | Disc |
| 93271 | OBT III air motor front plate | Disc |
| 93272 | OBT III roll pin | Disc |
| 93273 | OBT III air motor cylinder | Disc |
| 93274 | OBT air motor rotor | Disc |
| 93275 | OBT III air motor blade | Disc |
| 93276 | OBT III air motor rear plate | Disc |
| 93277 | OBT III o-ring, 25.1 x 1.6 | Disc |
| 93278 | OBT I leg with wheel | $154.00 |
| 93279 | OBT I wheel bearing | $14.00 |
| 93280 | OBT I motor ring | $149.00 |
| 93281 | OBT I compression npl | $69.00 |
| 93282 | OBT I leg w/o wheel | CALL |
| 93283 | OBT I lock nut | $6.00 |
| 93284 | OBT I air motor casing | $762.00 |
| 93285 | OBT I air motor front ball bearing | $42.00 |
| 93286 | OBT I air motor spacer | $100.00 |
| 93287 | OBT I air motor front plate | $110.00 |
| 93288 | OBT I air motor key | $40.00 |
| 93289 | OBT I air motor rotor | CALL |
| 93290 | OBT I air motor rear plate | $409.00 |
| 93291 | OBT I air motor blade | $52.00 |
| 93292 | OBT I air cylinder | CALL |
| 93293 | OBT I roll pin | $38.00 |
| 93294 | OBT I air motor rear ball bearing | $40.00 |
| 93295 | OBT I o-ring, 16.1 x 1.6 | $38.00 |
| 93296 | OBT I air motor rear spacer | $79.00 |
| 93297 | OBT I air motor snap ring | $42.00 |
| 93298 | OBT housing | CALL |
| 93299 | OBT locking ring | CALL |
| 93300 | OBT tightening ring | $112.00 |
| 93301 | OBT III o-ring, 22.1 x 1.6 | Disc |
| 93302 | OBT connector, paint spray gun | $75.00 |
| 93303 | OBT o-ring, 22.1 x 1.6 | $6.00 |
| 93304 | OBT III air motor rear disc | Disc |
| 93305 | OBT air motor rear snap ring | $40.00 |
| 93306 | OBT o-ring, 8.1 x 1.6 | $6.00 |
| 93307 | OBT o-ring, 11.1 x 1.6 | $6.00 |
| 93308 | OBT III o-ring set | $122.00 |
| 93309 | OBT I o-ring set | $99.00 |
| 93310 | OBT o-ring set, air control hose | $26.00 |
| 93311 | OBT III housing tube | $699.00 |
| 93312 | OBT III connection body | $1,096.00 |
| 93313 | OBT III inner arm | $219.00 |
| 93314 | OBT III outer arm | $219.00 |
| 93315 | OBT III wheel | $49.00 |
| 93316 | OBT III leg pivot screw | $10.00 |
| 93317 | OBT III washer wheel screw | $6.00 |
| 93318 | OBT III wheel screw | $6.00 |
| 93319 | OBT III wheel bushing | $17.00 |
| 93320 | OBT III leg bushing | $17.00 |
| 93321 | OBT III paint tube | $340.00 |
| 93322 | OBT III T-piece | $107.00 |
| 93323 | OBT III cylinder head cover | $502.00 |
| 93324 | OBT III lock nut | $6.00 |
| 93326 | OBT I nylon strainer o-ring | $13.00 |
| 93327 | Orbiter I w/gun for 12 ft long pipe | CALL |
| 93328 | Orbiter III w/gun for 12 ft long pipe | CALL |
| 93329 | Orbiter I w/gun for 20 ft long pipe | CALL |
| 93330 | Orbiter III w/gun for 20 ft long pipe | CALL |
| 93331 | Orbiter I w/gun for 40 ft long pipe | CALL |
| 93332 | Orbiter III w/gun for 40 ft long pipe | CALL |
| 93333 | OBT paint hose union | $84.00 |
| 94000 | OBT I wheel kit | $54.00 |
| 94001 | OBT III impeller kit | $712.00 |
| 94002 | OBT III wheel kit | $119.00 |
| 94003 | OBT control spacer | $17.00 |
| 99147 | Nozzle, TXD-6, 3/8" orif Contr | $194.00 |
| 99148 | Nozzle, TXD-7, 7/16" orif Contr | $231.00 |
| 99149 | Nozzle, TXD-8, 1/2" orif Contr | $252.00 |
| 99173 | Holder, HEP-3/4 (nyl), 1-1/4" thrd, 3/4"OD hose | $14.00 |
| 99456 | Metering plunger, PVR | $39.00 |
| 99555 | Valve, abr mtrg, LMV, S/King & Pool Pal | $265.00 |
| 99860 | Power Gun w/hoses, hpr & cart, 16 ft hose | CALL |
| 99899 | Hopper and cart asmbly, Power Gun | $572.00 |
| 99996 | Gasket, APL 20 window | $16.00 |
| 100013 | Screw, 8mm socket head, S/King | $5.00 |
| 100014 | Piston, diaphr, S/King | $47.00 |
| 100015 | Valve body, outlet - upper, S/King | $103.00 |
| 100016 | Diaphr, outlet valve, RMS | $30.00 |
| 100017 | Diaphr piston guide, S/King | $75.00 |
| 100018 | Piston, u-seal, S/King | $44.00 |
| 100019 | Screw, 10mm ctrsnk socket, S/King | $5.00 |
| 100020 | U-seal, inlet and outlet valves | $18.00 |
| 100021 | Piston, inlet, S/King | $67.00 |
| 100022 | Valve body, inlet, S/King | $338.00 |
| 100023 | Screw, 8mm x 30mm skt hd, S/King | $3.00 |
| 100024 | Valve, ACV air control w/belt | $56.00 |
| 100025 | Gasket, cover plate, S/King | $10.00 |
| 100027 | Tool, spanner wrench, S/King | $175.00 |
| 100032 | Valve body, outlet - lower, S/King | $107.00 |
| 100310 | Ball bearing, PVR | $4.00 |
| 100311 | Pin, safety, PVR valve | $4.00 |
| 100312 | Pin, safety, long, PVR | $2.00 |
| 100477 | Gun asmbly, Power Gun | $683.00 |
Clemco Parts List